激光辅助热处理对双相材料热成形性能的影响

IF 1.7 3区材料科学 Q2 METALLURGY & METALLURGICAL ENGINEERING

Ironmaking & Steelmaking Pub Date : 2023-02-19 DOI:10.1080/03019233.2023.2169222

İ. Karaağaç, M. Kabakçı, Zübeyde Başdoğan

{"title":"激光辅助热处理对双相材料热成形性能的影响","authors":"İ. Karaağaç, M. Kabakçı, Zübeyde Başdoğan","doi":"10.1080/03019233.2023.2169222","DOIUrl":null,"url":null,"abstract":"ABSTRACT In this study, the effects of local heat treatment using a low-power laser on the bending formability of DP800 sheet material were experimentally investigated. In the first step of the study, only the punch contact bending region of sheet metal was locally heated with a constant feed rate (1 mm s−1) and at different laser powers (50, 75, and 100% Watt). In the next step, the sheet material was transferred to the bending die for bending without any cooling process, and into the last stage, the sheet material was formed in different angled V-bending dies (30°, 60°, and 90°). It was observed that in heating up to 75-W power, the hardness decreased to 237 HV due to the dissolution of the martensite in the microstructure of DP material, and the springback value decreased by 39.285% due to the decrease in hardness.","PeriodicalId":14753,"journal":{"name":"Ironmaking & Steelmaking","volume":"50 1","pages":"984 - 990"},"PeriodicalIF":1.7000,"publicationDate":"2023-02-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"The effects of laser-assisted heat treatment on warm formability of dual-phase materials\",\"authors\":\"İ. Karaağaç, M. Kabakçı, Zübeyde Başdoğan\",\"doi\":\"10.1080/03019233.2023.2169222\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"ABSTRACT In this study, the effects of local heat treatment using a low-power laser on the bending formability of DP800 sheet material were experimentally investigated. In the first step of the study, only the punch contact bending region of sheet metal was locally heated with a constant feed rate (1 mm s−1) and at different laser powers (50, 75, and 100% Watt). In the next step, the sheet material was transferred to the bending die for bending without any cooling process, and into the last stage, the sheet material was formed in different angled V-bending dies (30°, 60°, and 90°). It was observed that in heating up to 75-W power, the hardness decreased to 237 HV due to the dissolution of the martensite in the microstructure of DP material, and the springback value decreased by 39.285% due to the decrease in hardness.\",\"PeriodicalId\":14753,\"journal\":{\"name\":\"Ironmaking & Steelmaking\",\"volume\":\"50 1\",\"pages\":\"984 - 990\"},\"PeriodicalIF\":1.7000,\"publicationDate\":\"2023-02-19\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Ironmaking & Steelmaking\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1080/03019233.2023.2169222\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ironmaking & Steelmaking","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/03019233.2023.2169222","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}

引用次数: 1

摘要

摘要本研究通过实验研究了低功率激光局部热处理对DP800板材弯曲成形性能的影响。在研究的第一步中，在不同的激光功率(50、75和100%瓦特)下，以恒定的进给速率(1 mm s−1)对金属板的冲压接触弯曲区域进行局部加热。下一步，将板料不经任何冷却工序转移到弯曲模进行弯曲，进入最后一步，将板料在不同角度的v型弯曲模(30°、60°和90°)上成形。结果表明，当加热功率达到75-W时，由于马氏体在DP材料显微组织中的溶解，硬度下降到237 HV，回弹值下降了39.285%。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

The effects of laser-assisted heat treatment on warm formability of dual-phase materials

ABSTRACT In this study, the effects of local heat treatment using a low-power laser on the bending formability of DP800 sheet material were experimentally investigated. In the first step of the study, only the punch contact bending region of sheet metal was locally heated with a constant feed rate (1 mm s−1) and at different laser powers (50, 75, and 100% Watt). In the next step, the sheet material was transferred to the bending die for bending without any cooling process, and into the last stage, the sheet material was formed in different angled V-bending dies (30°, 60°, and 90°). It was observed that in heating up to 75-W power, the hardness decreased to 237 HV due to the dissolution of the martensite in the microstructure of DP material, and the springback value decreased by 39.285% due to the decrease in hardness.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Ironmaking & Steelmaking 工程技术-冶金工程

CiteScore

3.70

自引率

9.50%

发文量

125

审稿时长

2.9 months

期刊介绍： Ironmaking & Steelmaking: Processes, Products and Applications monitors international technological advances in the industry with a strong element of engineering and product related material. First class refereed papers from the international iron and steel community cover all stages of the process, from ironmaking and its attendant technologies, through casting and steelmaking, to rolling, forming and delivery of the product, including monitoring, quality assurance and environmental issues. The journal also carries research profiles, features on technological and industry developments and expert reviews on major conferences.