超快加热对aisi 441铁素体不锈钢的影响

IF 1.1 Q3 METALLURGY & METALLURGICAL ENGINEERING

Acta Metallurgica Slovaca Pub Date : 2023-03-23 DOI:10.36547/ams.29.1.1713

G. Stornelli, L. Albini, P. E. Di Nunzio, Giulia Tiracorrendo, B. R. Rodriguez vargas, A. Di schino

{"title":"超快加热对aisi 441铁素体不锈钢的影响","authors":"G. Stornelli, L. Albini, P. E. Di Nunzio, Giulia Tiracorrendo, B. R. Rodriguez vargas, A. Di schino","doi":"10.36547/ams.29.1.1713","DOIUrl":null,"url":null,"abstract":"The use of the ultrafast heating (UFH) heat treatment process attracted great attention in the last few years, following the requirements of CO2 emissions reduction. The \neffect of ultrafast heating (UFH) treatment an AISI 441 ferritic stainless steels is reported in this paper. Results show that a minimum temperature of 975 °C is required in order to achieve a fully recrystallized microstructure. The study highlights the effect of ultrarapid annealing on grain size evolution as a function of different adopted process parameters. The obtained microstructure is related to mechanical properties in terms of ultimate tensile stress and hardness.","PeriodicalId":44511,"journal":{"name":"Acta Metallurgica Slovaca","volume":null,"pages":null},"PeriodicalIF":1.1000,"publicationDate":"2023-03-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"EFFECT OF ULTRAFAST HEATING ON AISI 441 FERRITIC STAINLESS STEEL\",\"authors\":\"G. Stornelli, L. Albini, P. E. Di Nunzio, Giulia Tiracorrendo, B. R. Rodriguez vargas, A. Di schino\",\"doi\":\"10.36547/ams.29.1.1713\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The use of the ultrafast heating (UFH) heat treatment process attracted great attention in the last few years, following the requirements of CO2 emissions reduction. The \\neffect of ultrafast heating (UFH) treatment an AISI 441 ferritic stainless steels is reported in this paper. Results show that a minimum temperature of 975 °C is required in order to achieve a fully recrystallized microstructure. The study highlights the effect of ultrarapid annealing on grain size evolution as a function of different adopted process parameters. The obtained microstructure is related to mechanical properties in terms of ultimate tensile stress and hardness.\",\"PeriodicalId\":44511,\"journal\":{\"name\":\"Acta Metallurgica Slovaca\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-03-23\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Acta Metallurgica Slovaca\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.36547/ams.29.1.1713\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Slovaca","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36547/ams.29.1.1713","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}

引用次数: 2

摘要

随着二氧化碳减排的要求，超快加热（UFH）热处理工艺的使用在过去几年引起了极大的关注。本文报道了AISI441铁素体不锈钢的超快速加热（UFH）处理效果。结果表明，为了获得完全再结晶的微观结构，需要975°C的最低温度。该研究强调了超快退火对晶粒尺寸演变的影响，这是不同工艺参数的函数。所获得的微观结构与极限拉伸应力和硬度方面的机械性能有关。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

EFFECT OF ULTRAFAST HEATING ON AISI 441 FERRITIC STAINLESS STEEL

The use of the ultrafast heating (UFH) heat treatment process attracted great attention in the last few years, following the requirements of CO2 emissions reduction. The effect of ultrafast heating (UFH) treatment an AISI 441 ferritic stainless steels is reported in this paper. Results show that a minimum temperature of 975 °C is required in order to achieve a fully recrystallized microstructure. The study highlights the effect of ultrarapid annealing on grain size evolution as a function of different adopted process parameters. The obtained microstructure is related to mechanical properties in terms of ultimate tensile stress and hardness.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Acta Metallurgica Slovaca METALLURGY & METALLURGICAL ENGINEERING-

CiteScore

2.00

自引率

30.00%

发文量

审稿时长

12 weeks