Luisa Drummond, R. M. H. Segundo, H. M. Oshima, R. Shinkai
{"title":"表面纹理对单种植体支持的宽台基牙冠固位的影响","authors":"Luisa Drummond, R. M. H. Segundo, H. M. Oshima, R. Shinkai","doi":"10.15448/1980-6523.2017.4.28739","DOIUrl":null,"url":null,"abstract":"OBJECTIVE: This in vitro study evaluated the retention of copings cemented with a provisional cement and a permanent cement on wide-platform short abutments with different surface texture.METHODS: Two wide-platform abutments (height 4.0 mm) with machined (original) or modified surface (air-blasted with 50-µm aluminum oxide) were connected to two implant replicas under torque of 35 N.cm. Ten copings were cast in Cr-Co alloy from calcinable cylinders. Each coping was luted on the abutment under an axial force of 5 kg for 10 min, and the specimen was stored in a humid environment at 37°C for 20 h. After mechanical cycling simulating masticatory fatigue for 7 days (5754 cycles, 60 cycles/min, 200 N, 37°C), the specimens were subjected to a uniaxial tensile test at 0.5 cm/min, and the maximum retention strength (N) was recorded. After testing, the surfaces were cleaned, and the procedures were repeated for each coping in the experimental group. Data were analyzed by Student t test for paired samples. RESULTS: For the temporary cement, the mean retention (SD) was 36.1 (10.7) N for the machined surface and 49.6 (2.7) N for the blasted surface (P=0.004) (37% increase). For the zinc phosphate cement, the values were 292.0 (89.8) N and 440.6 (48.1) N, (P<0.001) (42% increase).CONCLUSION: The results suggest that the air-blasting of short and wide abutments increases the retention of the cast coping cemented with temporary or permanent cement.","PeriodicalId":38878,"journal":{"name":"Revista Odonto Ciencia","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2018-07-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.15448/1980-6523.2017.4.28739","citationCount":"0","resultStr":"{\"title\":\"The effect of surface texture on the retention of single implant-supported crowns cemented on wide-platform abutments\",\"authors\":\"Luisa Drummond, R. M. H. Segundo, H. M. Oshima, R. Shinkai\",\"doi\":\"10.15448/1980-6523.2017.4.28739\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"OBJECTIVE: This in vitro study evaluated the retention of copings cemented with a provisional cement and a permanent cement on wide-platform short abutments with different surface texture.METHODS: Two wide-platform abutments (height 4.0 mm) with machined (original) or modified surface (air-blasted with 50-µm aluminum oxide) were connected to two implant replicas under torque of 35 N.cm. Ten copings were cast in Cr-Co alloy from calcinable cylinders. Each coping was luted on the abutment under an axial force of 5 kg for 10 min, and the specimen was stored in a humid environment at 37°C for 20 h. After mechanical cycling simulating masticatory fatigue for 7 days (5754 cycles, 60 cycles/min, 200 N, 37°C), the specimens were subjected to a uniaxial tensile test at 0.5 cm/min, and the maximum retention strength (N) was recorded. After testing, the surfaces were cleaned, and the procedures were repeated for each coping in the experimental group. Data were analyzed by Student t test for paired samples. RESULTS: For the temporary cement, the mean retention (SD) was 36.1 (10.7) N for the machined surface and 49.6 (2.7) N for the blasted surface (P=0.004) (37% increase). For the zinc phosphate cement, the values were 292.0 (89.8) N and 440.6 (48.1) N, (P<0.001) (42% increase).CONCLUSION: The results suggest that the air-blasting of short and wide abutments increases the retention of the cast coping cemented with temporary or permanent cement.\",\"PeriodicalId\":38878,\"journal\":{\"name\":\"Revista Odonto Ciencia\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-07-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.15448/1980-6523.2017.4.28739\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Revista Odonto Ciencia\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.15448/1980-6523.2017.4.28739\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Dentistry\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Revista Odonto Ciencia","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.15448/1980-6523.2017.4.28739","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Dentistry","Score":null,"Total":0}
The effect of surface texture on the retention of single implant-supported crowns cemented on wide-platform abutments
OBJECTIVE: This in vitro study evaluated the retention of copings cemented with a provisional cement and a permanent cement on wide-platform short abutments with different surface texture.METHODS: Two wide-platform abutments (height 4.0 mm) with machined (original) or modified surface (air-blasted with 50-µm aluminum oxide) were connected to two implant replicas under torque of 35 N.cm. Ten copings were cast in Cr-Co alloy from calcinable cylinders. Each coping was luted on the abutment under an axial force of 5 kg for 10 min, and the specimen was stored in a humid environment at 37°C for 20 h. After mechanical cycling simulating masticatory fatigue for 7 days (5754 cycles, 60 cycles/min, 200 N, 37°C), the specimens were subjected to a uniaxial tensile test at 0.5 cm/min, and the maximum retention strength (N) was recorded. After testing, the surfaces were cleaned, and the procedures were repeated for each coping in the experimental group. Data were analyzed by Student t test for paired samples. RESULTS: For the temporary cement, the mean retention (SD) was 36.1 (10.7) N for the machined surface and 49.6 (2.7) N for the blasted surface (P=0.004) (37% increase). For the zinc phosphate cement, the values were 292.0 (89.8) N and 440.6 (48.1) N, (P<0.001) (42% increase).CONCLUSION: The results suggest that the air-blasting of short and wide abutments increases the retention of the cast coping cemented with temporary or permanent cement.
期刊介绍:
Cessation. The Revista Odonto Ciência is a peer-reviewed journal published online (ISSN 1980-6523), four times per year, supported by the Pontifical Catholic University of Rio Grande do Sul – Dental School since 1986. Its abbreviation is Rev Odonto Cienc, which should be used in references, bibliographic legends, and footnotes. The Revista Odonto Ciência is an international scientific journal dedicated to provide a forum for academics, researchers, and practitioners to communicate relevant basic, clinical, education, and epidemiological studies in Dentistry and related fields. The Journal seeks to publish articles on new conceptual models, innovative technology, alternative procedures or treatment to reduce disease burden in the general population or specific groups, thus contributing to translating science into practice and social development. Contributions falling into the following categories will be considered for publication: 1) original research reports of basic and applied oral sciences, epidemiological, and education studies; 2) review article; 3) case report. The Revista Odonto Ciência only accepts manuscripts written in English. Manuscripts submitted to this journal should not have been published before nor have publication pending elsewhere.