HTU型可变切屑间隙木薯切片机的研制

Q3 Agricultural and Biological Sciences

Research in Agricultural Engineering Pub Date : 2021-12-17 DOI:10.17221/102/2020-rae

Samuel Kojo Ahorsu, H. Ofori, E. Kumah, Maxwell Budu, Cephas Kwaku Bosrotsi, Joseph Aveyiri

{"title":"HTU型可变切屑间隙木薯切片机的研制","authors":"Samuel Kojo Ahorsu, H. Ofori, E. Kumah, Maxwell Budu, Cephas Kwaku Bosrotsi, Joseph Aveyiri","doi":"10.17221/102/2020-rae","DOIUrl":null,"url":null,"abstract":"The objective of this research was to design, construct and evaluate a variable chipping clearance cassava chipper for processors which will produce uniform and varying cassava chip geometry for multipurpose usage. It consists of a drive shaft with varying chipping clearances (6, 18, and 28 mm) to produce varied chip geometry. The average throughput capacity of the chipper was found to be 475.5 kg·h–1 at a speed range of 460–800 rpm with a chipping clearance of 6–28 mm. The average chipping efficiency ranges from a minimum–maximum of 76.6–99.4% for the selected operational speeds and chipping clearances. The chipping capacity and the output to input ratio is dependent on the operational speeds and chipping clearances of the machine.","PeriodicalId":20906,"journal":{"name":"Research in Agricultural Engineering","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2021-12-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Development of HTU-model variable chipping clearance cassava chipper\",\"authors\":\"Samuel Kojo Ahorsu, H. Ofori, E. Kumah, Maxwell Budu, Cephas Kwaku Bosrotsi, Joseph Aveyiri\",\"doi\":\"10.17221/102/2020-rae\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The objective of this research was to design, construct and evaluate a variable chipping clearance cassava chipper for processors which will produce uniform and varying cassava chip geometry for multipurpose usage. It consists of a drive shaft with varying chipping clearances (6, 18, and 28 mm) to produce varied chip geometry. The average throughput capacity of the chipper was found to be 475.5 kg·h–1 at a speed range of 460–800 rpm with a chipping clearance of 6–28 mm. The average chipping efficiency ranges from a minimum–maximum of 76.6–99.4% for the selected operational speeds and chipping clearances. The chipping capacity and the output to input ratio is dependent on the operational speeds and chipping clearances of the machine.\",\"PeriodicalId\":20906,\"journal\":{\"name\":\"Research in Agricultural Engineering\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-12-17\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Research in Agricultural Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.17221/102/2020-rae\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Agricultural and Biological Sciences\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Research in Agricultural Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.17221/102/2020-rae","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Agricultural and Biological Sciences","Score":null,"Total":0}

引用次数: 0

摘要

本研究的目的是设计、构建和评估一种用于处理器的可变切屑间隙木薯削片机，该削片机将生产统一和不同的木薯切屑几何形状，用于多用途。它由一个具有不同切屑间隙（6、18和28 mm）的驱动轴组成，以产生不同的切屑几何形状。削片机的平均生产能力为475.5 kg·h–1，速度范围为460–800 rpm，削片间隙为6–28 mm。对于选定的操作速度和切屑间隙，平均切屑效率范围从最小到最大76.6到99.4%。切削能力和输出输入比取决于机器的操作速度和切削间隙。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Development of HTU-model variable chipping clearance cassava chipper

The objective of this research was to design, construct and evaluate a variable chipping clearance cassava chipper for processors which will produce uniform and varying cassava chip geometry for multipurpose usage. It consists of a drive shaft with varying chipping clearances (6, 18, and 28 mm) to produce varied chip geometry. The average throughput capacity of the chipper was found to be 475.5 kg·h–1 at a speed range of 460–800 rpm with a chipping clearance of 6–28 mm. The average chipping efficiency ranges from a minimum–maximum of 76.6–99.4% for the selected operational speeds and chipping clearances. The chipping capacity and the output to input ratio is dependent on the operational speeds and chipping clearances of the machine.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Research in Agricultural Engineering Engineering, agriculture-

CiteScore

1.40

自引率

0.00%

发文量

审稿时长

24 weeks

期刊介绍： Original scientific papers, short communications, information, and studies covering all areas of agricultural engineering, agricultural technology, processing of agricultural products, countryside buildings and related problems from ecology, energetics, economy, ergonomy and applied physics and chemistry. Papers are published in English.