喷丸处理对中碳钢磨损性能的影响

IF 1.9 Q3 ENGINEERING, INDUSTRIAL

Production Engineering Archives Pub Date : 2022-08-05 DOI:10.30657/pea.2022.28.29

M. Vicen, O. Bokůvka, L. Trško, M. Drbúl, R. Nikolić, F. Nový

{"title":"喷丸处理对中碳钢磨损性能的影响","authors":"M. Vicen, O. Bokůvka, L. Trško, M. Drbúl, R. Nikolić, F. Nový","doi":"10.30657/pea.2022.28.29","DOIUrl":null,"url":null,"abstract":"Abstract Influence of shot peening on the wear behaviour of medium carbon, C55 steel was experimentally verified. Experimental work included determination of the chemical composition, heat treatment, microstructure evaluation, mechanical properties measurement, shot peening treatment, the magnitude of the compressive residual stresses was evaluated, roughness profiles measurement and finally the friction tests. The results evidence the significant role played by the applied shot peening on wear behaviour of medium carbon steel. An important effect of surface roughness has been demonstrated. The coefficient of friction after shot peening compared to ground surface increased, 1.44 – 1.85 times.","PeriodicalId":36269,"journal":{"name":"Production Engineering Archives","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2022-08-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Influence of Shot Peening on the Wear Behaviour of Medium Carbon Steel\",\"authors\":\"M. Vicen, O. Bokůvka, L. Trško, M. Drbúl, R. Nikolić, F. Nový\",\"doi\":\"10.30657/pea.2022.28.29\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract Influence of shot peening on the wear behaviour of medium carbon, C55 steel was experimentally verified. Experimental work included determination of the chemical composition, heat treatment, microstructure evaluation, mechanical properties measurement, shot peening treatment, the magnitude of the compressive residual stresses was evaluated, roughness profiles measurement and finally the friction tests. The results evidence the significant role played by the applied shot peening on wear behaviour of medium carbon steel. An important effect of surface roughness has been demonstrated. The coefficient of friction after shot peening compared to ground surface increased, 1.44 – 1.85 times.\",\"PeriodicalId\":36269,\"journal\":{\"name\":\"Production Engineering Archives\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2022-08-05\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Production Engineering Archives\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.30657/pea.2022.28.29\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, INDUSTRIAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Production Engineering Archives","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.30657/pea.2022.28.29","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, INDUSTRIAL","Score":null,"Total":0}

引用次数: 2

摘要

试验验证了喷丸处理对中碳C55钢磨损性能的影响。实验工作包括化学成分的测定、热处理、微观结构评估、机械性能测量、喷丸处理、压缩残余应力的大小评估、粗糙度轮廓测量，最后进行摩擦试验。结果表明，喷丸处理对中碳钢的磨损性能起着重要作用。表面粗糙度的一个重要影响已经被证明。喷丸处理后的摩擦系数比研磨表面增加了1.44–1.85倍。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Influence of Shot Peening on the Wear Behaviour of Medium Carbon Steel

Abstract Influence of shot peening on the wear behaviour of medium carbon, C55 steel was experimentally verified. Experimental work included determination of the chemical composition, heat treatment, microstructure evaluation, mechanical properties measurement, shot peening treatment, the magnitude of the compressive residual stresses was evaluated, roughness profiles measurement and finally the friction tests. The results evidence the significant role played by the applied shot peening on wear behaviour of medium carbon steel. An important effect of surface roughness has been demonstrated. The coefficient of friction after shot peening compared to ground surface increased, 1.44 – 1.85 times.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Production Engineering Archives Engineering-Industrial and Manufacturing Engineering

CiteScore

6.10

自引率

13.00%

发文量

审稿时长

6 weeks