{"title":"DP980高级高强度钢弯曲回弹对产品精度的影响","authors":"Hu Le, D. Vu, Phuong Thi Doan, Kien Trung Le","doi":"10.12776/ams.v25i3.1306","DOIUrl":null,"url":null,"abstract":"Springback is a common phenomenon in sheet metal forming, in which the material undergoes an elastic recovery as applied loads are removed. Springback causes the forming shape to deviate from the intended design geometry. This phenomenon, which can be influenced by several factors, effects on both bending angle and bending curvature. The aim of this study is to determine the influence of different tool radius and the gap between punch and die on springback in bending of DP980 Advanced High-Strength Steels (AHSS) sheet. Experimental studies are combined with FEM method in commercial ABAQUS software to determine the bending angle after springback. To predict springback in bending process, the material properties are defined by Ludwik - Hollomon law, combined with the Hill’48 criterion. Experimental results are in good agreement with numerical simulations in case of bending in the rolling direction.","PeriodicalId":44511,"journal":{"name":"Acta Metallurgica Slovaca","volume":" ","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2019-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"EFFECT OF SPRINGBACK IN DP980 ADVANCED HIGH STRENGTH STEEL ON PRODUCT PRECISION IN BENDING PROCESS\",\"authors\":\"Hu Le, D. Vu, Phuong Thi Doan, Kien Trung Le\",\"doi\":\"10.12776/ams.v25i3.1306\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Springback is a common phenomenon in sheet metal forming, in which the material undergoes an elastic recovery as applied loads are removed. Springback causes the forming shape to deviate from the intended design geometry. This phenomenon, which can be influenced by several factors, effects on both bending angle and bending curvature. The aim of this study is to determine the influence of different tool radius and the gap between punch and die on springback in bending of DP980 Advanced High-Strength Steels (AHSS) sheet. Experimental studies are combined with FEM method in commercial ABAQUS software to determine the bending angle after springback. To predict springback in bending process, the material properties are defined by Ludwik - Hollomon law, combined with the Hill’48 criterion. Experimental results are in good agreement with numerical simulations in case of bending in the rolling direction.\",\"PeriodicalId\":44511,\"journal\":{\"name\":\"Acta Metallurgica Slovaca\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2019-09-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Acta Metallurgica Slovaca\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.12776/ams.v25i3.1306\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Slovaca","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.12776/ams.v25i3.1306","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
EFFECT OF SPRINGBACK IN DP980 ADVANCED HIGH STRENGTH STEEL ON PRODUCT PRECISION IN BENDING PROCESS
Springback is a common phenomenon in sheet metal forming, in which the material undergoes an elastic recovery as applied loads are removed. Springback causes the forming shape to deviate from the intended design geometry. This phenomenon, which can be influenced by several factors, effects on both bending angle and bending curvature. The aim of this study is to determine the influence of different tool radius and the gap between punch and die on springback in bending of DP980 Advanced High-Strength Steels (AHSS) sheet. Experimental studies are combined with FEM method in commercial ABAQUS software to determine the bending angle after springback. To predict springback in bending process, the material properties are defined by Ludwik - Hollomon law, combined with the Hill’48 criterion. Experimental results are in good agreement with numerical simulations in case of bending in the rolling direction.