通过挤压法优化温度和摩擦支架的生产工艺

Q4 Engineering

International Journal of Modern Manufacturing Technologies Pub Date : 2022-12-20 DOI:10.54684/ijmmt.2022.14.2.280

S. Sezek, M. Kizilelma, B. Aksakal

{"title":"通过挤压法优化温度和摩擦支架的生产工艺","authors":"S. Sezek, M. Kizilelma, B. Aksakal","doi":"10.54684/ijmmt.2022.14.2.280","DOIUrl":null,"url":null,"abstract":"\"The stent is manufactured by traditional machining methods. This study has been carried out to improve the mechanical properties of stents produced by removing swarf. Production methods have been examined and extruded to produce a seamless cylindrical section pipe. The Mg-Zn-XX alloy used in stent production was used in this study. Extrusion mold design is made to produce stent with Mg-Zn-XX alloy. These parameters are optimized because temperature and friction values from the Extrusion parameters affect the shaping parameters of the generated stent. During optimization, the Simufact finite elements program was used. The optimization has shown that the Mg-Zn-XX alloy has the best styling results of friction of 300 o C de Coulumb 0.4. \"","PeriodicalId":38009,"journal":{"name":"International Journal of Modern Manufacturing Technologies","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2022-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"OPTIMIZATION TEMPERATURE AND FRICTION STENT PRODUCTION PROCESS BY EXTRUSION METHOD\",\"authors\":\"S. Sezek, M. Kizilelma, B. Aksakal\",\"doi\":\"10.54684/ijmmt.2022.14.2.280\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\\"The stent is manufactured by traditional machining methods. This study has been carried out to improve the mechanical properties of stents produced by removing swarf. Production methods have been examined and extruded to produce a seamless cylindrical section pipe. The Mg-Zn-XX alloy used in stent production was used in this study. Extrusion mold design is made to produce stent with Mg-Zn-XX alloy. These parameters are optimized because temperature and friction values from the Extrusion parameters affect the shaping parameters of the generated stent. During optimization, the Simufact finite elements program was used. The optimization has shown that the Mg-Zn-XX alloy has the best styling results of friction of 300 o C de Coulumb 0.4. \\\"\",\"PeriodicalId\":38009,\"journal\":{\"name\":\"International Journal of Modern Manufacturing Technologies\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-12-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Modern Manufacturing Technologies\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.54684/ijmmt.2022.14.2.280\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Modern Manufacturing Technologies","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.54684/ijmmt.2022.14.2.280","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}

引用次数: 0

摘要

“支架是通过传统的机械加工方法制造的。本研究旨在改善通过去除切屑生产的支架的机械性能。对生产方法进行了检查并挤压生产出无缝圆柱形管。本研究使用了支架生产中使用的Mg-Zn-XX合金。挤压模具设计用于生产Mg-Zn-XX-哦。这些参数是优化的，因为来自挤压参数的温度和摩擦值影响生成的支架的成形参数。在优化过程中，使用了Simufact有限元程序。优化结果表明，Mg-Zn-XX合金在300°C de Coulumb 0.4的摩擦下具有最佳的造型效果。“

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

OPTIMIZATION TEMPERATURE AND FRICTION STENT PRODUCTION PROCESS BY EXTRUSION METHOD

"The stent is manufactured by traditional machining methods. This study has been carried out to improve the mechanical properties of stents produced by removing swarf. Production methods have been examined and extruded to produce a seamless cylindrical section pipe. The Mg-Zn-XX alloy used in stent production was used in this study. Extrusion mold design is made to produce stent with Mg-Zn-XX alloy. These parameters are optimized because temperature and friction values from the Extrusion parameters affect the shaping parameters of the generated stent. During optimization, the Simufact finite elements program was used. The optimization has shown that the Mg-Zn-XX alloy has the best styling results of friction of 300 o C de Coulumb 0.4. "

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Modern Manufacturing Technologies Engineering-Industrial and Manufacturing Engineering

CiteScore

0.70

自引率

0.00%

发文量

期刊介绍： The main topics of the journal are: Micro & Nano Technologies; Rapid Prototyping Technologies; High Speed Manufacturing Processes; Ecological Technologies in Machine Manufacturing; Manufacturing and Automation; Flexible Manufacturing; New Manufacturing Processes; Design, Control and Exploitation; Assembly and Disassembly; Cold Forming Technologies; Optimization of Experimental Research and Manufacturing Processes; Maintenance, Reliability, Life Cycle Time and Cost; CAD/CAM/CAE/CAX Integrated Systems; Composite Materials Technologies; Non-conventional Technologies; Concurrent Engineering; Virtual Manufacturing; Innovation, Creativity and Industrial Development.