{"title":"十二烷基硫酸钠改性壳聚糖去除六价铬的性能评价","authors":"Ahmad Al Shra’ah","doi":"10.47014/15.1.2","DOIUrl":null,"url":null,"abstract":"Hexavalent chromium (Cr(VI)) has the characteristic of forming anionic species, which are very toxic, very soluble in water and difficult to be removed. In this study, dichromate removal from aqueous solutions by chitosan and chitosan modified by sodium dodecyl sulfate (SDS) was addressed. The effect of various experimental parameters, such as pH (1-9), initial concentration (10-100 mg L-1), adsorbent dose (0.005-0.350 g) and contact time (5-60 min) was investigated. All experiments were conducted in batch mode at room temperature (~21 oC). The obtained equilibrium adsorption isotherms were analyzed using the Langmuir and Freundlich models. Furthermore, the kinetics of dichromate removal was analyzed by pseudo-first order, pseudo-second order and the Elovich models. Optimum conditions for obtaining high removal (~97%) within a relatively short time (60 min) are: 5.0 pH, 0.100 g SDS-chitosan dosage and an initial Cr2O72- concentration of 10 mg L-1. The dichromate adsorption capacity of chitosan is 8.3 mg L-1, while that of SDS-chitosan is 9.7 mg L-1. In addition, the adsorption of dichromate by chitosan and SDS-chitosan is well-fitted by the Langmuir and Freundlich models while the adsorption kinetics is best fitted by the pseudo-second-order kinetic model.","PeriodicalId":14654,"journal":{"name":"Jordan Journal of Chemistry","volume":" ","pages":""},"PeriodicalIF":0.4000,"publicationDate":"2020-03-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Evaluation of Chitosan Modified by Sodium Dodecyl Sulfate for Removing Hexavalent Chromium from Aqueous Solutions\",\"authors\":\"Ahmad Al Shra’ah\",\"doi\":\"10.47014/15.1.2\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Hexavalent chromium (Cr(VI)) has the characteristic of forming anionic species, which are very toxic, very soluble in water and difficult to be removed. In this study, dichromate removal from aqueous solutions by chitosan and chitosan modified by sodium dodecyl sulfate (SDS) was addressed. The effect of various experimental parameters, such as pH (1-9), initial concentration (10-100 mg L-1), adsorbent dose (0.005-0.350 g) and contact time (5-60 min) was investigated. All experiments were conducted in batch mode at room temperature (~21 oC). The obtained equilibrium adsorption isotherms were analyzed using the Langmuir and Freundlich models. Furthermore, the kinetics of dichromate removal was analyzed by pseudo-first order, pseudo-second order and the Elovich models. Optimum conditions for obtaining high removal (~97%) within a relatively short time (60 min) are: 5.0 pH, 0.100 g SDS-chitosan dosage and an initial Cr2O72- concentration of 10 mg L-1. The dichromate adsorption capacity of chitosan is 8.3 mg L-1, while that of SDS-chitosan is 9.7 mg L-1. In addition, the adsorption of dichromate by chitosan and SDS-chitosan is well-fitted by the Langmuir and Freundlich models while the adsorption kinetics is best fitted by the pseudo-second-order kinetic model.\",\"PeriodicalId\":14654,\"journal\":{\"name\":\"Jordan Journal of Chemistry\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.4000,\"publicationDate\":\"2020-03-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Jordan Journal of Chemistry\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.47014/15.1.2\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"CHEMISTRY, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Jordan Journal of Chemistry","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.47014/15.1.2","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0
摘要
六价铬(Cr(VI))具有形成阴离子物种的特性,这些阴离子物种毒性很大,极易溶于水,难以去除。研究了壳聚糖和十二烷基硫酸钠改性壳聚糖对水溶液中重铬酸盐的去除。研究了各种实验参数,如pH(1-9)、初始浓度(10-100mg L-1)、吸附剂剂量(0.005-0.350g)和接触时间(5-60min)的影响。所有实验均在室温(~21℃)下分批进行。利用Langmuir和Freundlich模型分析了所获得的平衡吸附等温线。此外,采用拟一阶、拟二阶和Elovich模型对重铬酸盐的去除动力学进行了分析。在相对较短的时间(60分钟)内获得高去除率(~97%)的最佳条件是:5.0 pH,0.100 g SDS壳聚糖剂量和10 mg L-1的初始Cr2O72浓度。壳聚糖对重铬酸盐的吸附量为8.3mg L-1,而SDS壳聚糖对重铬酸钾的吸附量则为9.7mg L-1。此外,壳聚糖和SDS壳聚糖对重铬酸盐的吸附用Langmuir和Freundlich模型拟合良好,而吸附动力学用拟二阶动力学模型拟合最好。
Evaluation of Chitosan Modified by Sodium Dodecyl Sulfate for Removing Hexavalent Chromium from Aqueous Solutions
Hexavalent chromium (Cr(VI)) has the characteristic of forming anionic species, which are very toxic, very soluble in water and difficult to be removed. In this study, dichromate removal from aqueous solutions by chitosan and chitosan modified by sodium dodecyl sulfate (SDS) was addressed. The effect of various experimental parameters, such as pH (1-9), initial concentration (10-100 mg L-1), adsorbent dose (0.005-0.350 g) and contact time (5-60 min) was investigated. All experiments were conducted in batch mode at room temperature (~21 oC). The obtained equilibrium adsorption isotherms were analyzed using the Langmuir and Freundlich models. Furthermore, the kinetics of dichromate removal was analyzed by pseudo-first order, pseudo-second order and the Elovich models. Optimum conditions for obtaining high removal (~97%) within a relatively short time (60 min) are: 5.0 pH, 0.100 g SDS-chitosan dosage and an initial Cr2O72- concentration of 10 mg L-1. The dichromate adsorption capacity of chitosan is 8.3 mg L-1, while that of SDS-chitosan is 9.7 mg L-1. In addition, the adsorption of dichromate by chitosan and SDS-chitosan is well-fitted by the Langmuir and Freundlich models while the adsorption kinetics is best fitted by the pseudo-second-order kinetic model.