测量仪器合格性评定程序——结构、设计原则和选择方法

S. Cherepkov, V. Dulya, V. Maliavskyi
{"title":"测量仪器合格性评定程序——结构、设计原则和选择方法","authors":"S. Cherepkov, V. Dulya, V. Maliavskyi","doi":"10.33955/2307-2180(1)2019.56-61","DOIUrl":null,"url":null,"abstract":"Since January 01, 2016, new legislation in the field of metrology came in force in Ukraine. There have been significant changes in the regulation of metrological activity in accordance with the new Law of Ukraine “On Metrology and Metrological Activity”, which is harmonized with European legislation, in the country. Thus, the new Law lacks such forms of metrological control as state acceptance tests and state control tests, as well as state metrological certification of measuring instruments. Instead of these types of metrological control the conformity assessment system of measuring instruments according to established requirements has been implemented. Therefore, this article considers new approaches of the conformity assessment system of measuring instruments according to established requirements and is a logical continuation of an article published in Metrology and Instruments journal (1 (69), 2018), which considered the basics of development and operating the conformity assessment system of measuring instruments. This article considers some issues related to conformity assessment procedures. Criteria for the selection of modules for the conformity assessment procedure and their description are defined. The existing approaches for selection of conformity assessment procedures of measuring instruments and the cooperation of manufacturers (suppliers) of measuring instruments with designated conformity assessment bodies on the market are given. The article offers practical interest for manufacturers of measuring instruments for the legal regulated sphere.","PeriodicalId":52864,"journal":{"name":"Metrologiia ta priladi","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2019-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Procedures for Assessing the Conformity of Measuring Instruments — Structure, Design Principles and Approaches to Their Choice\",\"authors\":\"S. Cherepkov, V. Dulya, V. Maliavskyi\",\"doi\":\"10.33955/2307-2180(1)2019.56-61\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Since January 01, 2016, new legislation in the field of metrology came in force in Ukraine. There have been significant changes in the regulation of metrological activity in accordance with the new Law of Ukraine “On Metrology and Metrological Activity”, which is harmonized with European legislation, in the country. Thus, the new Law lacks such forms of metrological control as state acceptance tests and state control tests, as well as state metrological certification of measuring instruments. Instead of these types of metrological control the conformity assessment system of measuring instruments according to established requirements has been implemented. Therefore, this article considers new approaches of the conformity assessment system of measuring instruments according to established requirements and is a logical continuation of an article published in Metrology and Instruments journal (1 (69), 2018), which considered the basics of development and operating the conformity assessment system of measuring instruments. This article considers some issues related to conformity assessment procedures. Criteria for the selection of modules for the conformity assessment procedure and their description are defined. The existing approaches for selection of conformity assessment procedures of measuring instruments and the cooperation of manufacturers (suppliers) of measuring instruments with designated conformity assessment bodies on the market are given. The article offers practical interest for manufacturers of measuring instruments for the legal regulated sphere.\",\"PeriodicalId\":52864,\"journal\":{\"name\":\"Metrologiia ta priladi\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-03-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Metrologiia ta priladi\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.33955/2307-2180(1)2019.56-61\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metrologiia ta priladi","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.33955/2307-2180(1)2019.56-61","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

摘要

自2016年1月1日起,乌克兰计量领域的新立法开始生效。根据乌克兰新的《计量和计量活动法》,该国的计量活动监管发生了重大变化,该法与欧洲立法相一致。因此,新法律缺乏国家验收测试和国家控制测试以及计量器具的国家计量认证等计量控制形式。已实施符合既定要求的测量仪器合格评定系统,而不是这些类型的计量控制。因此,本文根据既定要求考虑了测量仪器合格评定系统的新方法,是《计量与仪器》杂志(1(69),2018)上发表的一篇文章的逻辑延续,该文章考虑了测量仪表合格评定系统开发和运行的基础。本文讨论了与合格评定程序有关的一些问题。定义了合格评定程序模块的选择标准及其说明。给出了现有的计量器具合格评定程序的选择方法以及计量器具制造商(供应商)与市场上指定的合格评定机构的合作方法。本文为法律监管领域的测量仪器制造商提供了实际利益。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Procedures for Assessing the Conformity of Measuring Instruments — Structure, Design Principles and Approaches to Their Choice
Since January 01, 2016, new legislation in the field of metrology came in force in Ukraine. There have been significant changes in the regulation of metrological activity in accordance with the new Law of Ukraine “On Metrology and Metrological Activity”, which is harmonized with European legislation, in the country. Thus, the new Law lacks such forms of metrological control as state acceptance tests and state control tests, as well as state metrological certification of measuring instruments. Instead of these types of metrological control the conformity assessment system of measuring instruments according to established requirements has been implemented. Therefore, this article considers new approaches of the conformity assessment system of measuring instruments according to established requirements and is a logical continuation of an article published in Metrology and Instruments journal (1 (69), 2018), which considered the basics of development and operating the conformity assessment system of measuring instruments. This article considers some issues related to conformity assessment procedures. Criteria for the selection of modules for the conformity assessment procedure and their description are defined. The existing approaches for selection of conformity assessment procedures of measuring instruments and the cooperation of manufacturers (suppliers) of measuring instruments with designated conformity assessment bodies on the market are given. The article offers practical interest for manufacturers of measuring instruments for the legal regulated sphere.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
审稿时长
5 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信