Optimization of Cogging Torque Based on the Improved Bat Algorithm

Permanent magnet motors have the advantages of high output torque, high efficiency, and low noise, but the cogging effect is obvious. The 24-slot 4-pole surface-mounted permanent magnet synchronous motor is taken as an example to reduce the cogging torque of permanent magnet synchronous motors. Firstly, the generation mechanism of cogging torque is analysed based on the energy method, and the pole arc coefficient, air gap length, magnetic pole eccentricity, permanent magnet thickness, and slot opening width are determined as optimisation parameters. Then, a cogging torque optimisation method is further proposed based on the Taguchi method and the response surface method, and the bat algorithm with the Lévy flight feature is applied to obtain the optimal solution for the response surface model. Finally, finite element software is used to simulate the optimal motor model. The experimental results show that the efficiency of the motor solved by optimal parameters is increased by 1.6%, the cogging torque is reduced by 82.16%, and the torque ripple is reduced by 8.2%. The optimisation of cogging torque in this paper avoids fluctuations in torque, reduces motor vibration and noise, and improves the control characteristics of the permanent magnet motors drive system, operational reliability, and low-speed performance in the motor speed control system and high accuracy positioning in the position control system.