Mechanical Design of an Electromagnetic Calorimeter Prototype for a Future Muon Collider

Measurement of physics processes at new energy frontier experiments requires excellent spatial, time, and energy resolutions to resolve the structure of collimated high-energy jets. In a future Muon Collider, beam-induced backgrounds (BIB) represent the main challenge in the design of the detectors and of the event reconstruction algorithms. The technology and the design of the calorimeters should be chosen to reduce the effect of the BIB, while keeping good physics performance. Several requirements can be inferred: (i) high granularity to reduce the overlap of BIB particles in the same calorimeter cell; (ii) excellent timing (of the order of 100 ps) to reduce the out-of-time component of the BIB; (iii) longitudinal segmentation to distinguish the signal showers from the fake showers produced by the BIB. Moreover, the calorimeter should operate in a very harsh radiation environment, withstanding yearly a neutron flux of 1014 n1MeV /cm2 and a dose of 100 krad. Our proposal consists of a semi-homogeneous electromagnetic calorimeter based on Lead Fluoride Crystals (PbF2) readout by surface-mount UV-extended Silicon Photomultipliers (SiPMs): the Crilin calorimeter. In this paper, we report the mechanical design for the development of a small-scale prototype, consisting of 2 layers of 3 × 3 crystals.