内饰制造用皮革的耐撕裂性

IF 1 4区工程技术 Q3 MATERIALS SCIENCE, TEXTILES

Industria Textila Pub Date : 2023-06-30 DOI:10.35530/it.074.03.202275

Maria Costea, A. Seul, A. Mihai

{"title":"内饰制造用皮革的耐撕裂性","authors":"Maria Costea, A. Seul, A. Mihai","doi":"10.35530/it.074.03.202275","DOIUrl":null,"url":null,"abstract":"The paper presents experimental research on the slit tear resistance of leather used for producing upholstery. A finite\nelement analysis is done by simulating the product's behaviour, considering different factors and parameters, and\nmaterials are classified according to the normal stress results. The maximum force exerted during the tearing of the\nspecimen has been observed at the SATRA tensile testing machine, with STM 466ST attachment and digital software\ncontrol. The load at break, the extension at break, Young's Modulus, and the load-distance graphs were registered and\nthe medium values were calculated. The Taguchi method based on orthogonal arrays was used to maximize the material\ncharacteristics significant for this type of analysis.","PeriodicalId":13638,"journal":{"name":"Industria Textila","volume":" ","pages":""},"PeriodicalIF":1.0000,"publicationDate":"2023-06-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Slit tear resistance of leather used in upholstery manufacturing\",\"authors\":\"Maria Costea, A. Seul, A. Mihai\",\"doi\":\"10.35530/it.074.03.202275\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper presents experimental research on the slit tear resistance of leather used for producing upholstery. A finite\\nelement analysis is done by simulating the product's behaviour, considering different factors and parameters, and\\nmaterials are classified according to the normal stress results. The maximum force exerted during the tearing of the\\nspecimen has been observed at the SATRA tensile testing machine, with STM 466ST attachment and digital software\\ncontrol. The load at break, the extension at break, Young's Modulus, and the load-distance graphs were registered and\\nthe medium values were calculated. The Taguchi method based on orthogonal arrays was used to maximize the material\\ncharacteristics significant for this type of analysis.\",\"PeriodicalId\":13638,\"journal\":{\"name\":\"Industria Textila\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":1.0000,\"publicationDate\":\"2023-06-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Industria Textila\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.35530/it.074.03.202275\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MATERIALS SCIENCE, TEXTILES\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Industria Textila","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.35530/it.074.03.202275","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, TEXTILES","Score":null,"Total":0}

引用次数: 0

摘要

对室内装潢用皮革的抗裂撕裂性能进行了试验研究。通过模拟产品的行为进行有限元分析，考虑不同的因素和参数，并根据正应力结果对材料进行分类。在SATRA拉伸试验机上观察到试样撕裂时施加的最大力，该试验机带有STM 466ST附件和数字软件控制。记录了断裂载荷、断裂扩展、杨氏模量和载荷-距离图，并计算了中间值。使用基于正交阵列的田口法来最大化材料特征对这类分析的显著性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Slit tear resistance of leather used in upholstery manufacturing

The paper presents experimental research on the slit tear resistance of leather used for producing upholstery. A finite element analysis is done by simulating the product's behaviour, considering different factors and parameters, and materials are classified according to the normal stress results. The maximum force exerted during the tearing of the specimen has been observed at the SATRA tensile testing machine, with STM 466ST attachment and digital software control. The load at break, the extension at break, Young's Modulus, and the load-distance graphs were registered and the medium values were calculated. The Taguchi method based on orthogonal arrays was used to maximize the material characteristics significant for this type of analysis.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Industria Textila 工程技术-材料科学：纺织

CiteScore

1.80

自引率

14.30%

发文量

审稿时长

3.5 months

期刊介绍： Industria Textila journal is addressed to university and research specialists, to companies active in the textiles and clothing sector and to the related sectors users of textile products with a technical purpose.