{"title":"利用建筑物屋顶风道与风力机之间的喷嘴的理论结果——风力机提高风速发电","authors":"Bazgir As","doi":"10.4172/2168-9873.1000256","DOIUrl":null,"url":null,"abstract":"In order to increase the electrical power of the wind turbines, the velocity of the wind blowing on the wind turbine, is the most important factor that has to increase. In this paper it has been recommended that Contraction Nozzles could be applied between Wind Turbines and wind-way to provide the wind through themselves with more velocity. For all cases analysed in this paper, a three dimensional contraction nozzle with the same length (3 meters) but different input (in which wind blows through it) and output segment areas is considered. In the presented calculations, the inlet mean velocity is considered a constant value of in a windward area. Numerical solutions and CFD results have been the same for increased wind velocity in each Nozzle outlet or wind turbine’s inlet. Furthermore, the electrical power of related wind turbines has been numerically calculated in the presence and absence of the nozzles between wind turbines and wind flow and it shows a dramatic increase in wind turbines power.","PeriodicalId":90573,"journal":{"name":"Journal of applied mechanical engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2017-02-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.4172/2168-9873.1000256","citationCount":"0","resultStr":"{\"title\":\"Theoretical Results for Utilizing Nozzle Between the Wind-Way andWind Turbine in Roof of the Buildings - Wind Speed Increase for WindTurbine to Produce Electricity\",\"authors\":\"Bazgir As\",\"doi\":\"10.4172/2168-9873.1000256\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In order to increase the electrical power of the wind turbines, the velocity of the wind blowing on the wind turbine, is the most important factor that has to increase. In this paper it has been recommended that Contraction Nozzles could be applied between Wind Turbines and wind-way to provide the wind through themselves with more velocity. For all cases analysed in this paper, a three dimensional contraction nozzle with the same length (3 meters) but different input (in which wind blows through it) and output segment areas is considered. In the presented calculations, the inlet mean velocity is considered a constant value of in a windward area. Numerical solutions and CFD results have been the same for increased wind velocity in each Nozzle outlet or wind turbine’s inlet. Furthermore, the electrical power of related wind turbines has been numerically calculated in the presence and absence of the nozzles between wind turbines and wind flow and it shows a dramatic increase in wind turbines power.\",\"PeriodicalId\":90573,\"journal\":{\"name\":\"Journal of applied mechanical engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-02-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.4172/2168-9873.1000256\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of applied mechanical engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4172/2168-9873.1000256\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of applied mechanical engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4172/2168-9873.1000256","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Theoretical Results for Utilizing Nozzle Between the Wind-Way andWind Turbine in Roof of the Buildings - Wind Speed Increase for WindTurbine to Produce Electricity
In order to increase the electrical power of the wind turbines, the velocity of the wind blowing on the wind turbine, is the most important factor that has to increase. In this paper it has been recommended that Contraction Nozzles could be applied between Wind Turbines and wind-way to provide the wind through themselves with more velocity. For all cases analysed in this paper, a three dimensional contraction nozzle with the same length (3 meters) but different input (in which wind blows through it) and output segment areas is considered. In the presented calculations, the inlet mean velocity is considered a constant value of in a windward area. Numerical solutions and CFD results have been the same for increased wind velocity in each Nozzle outlet or wind turbine’s inlet. Furthermore, the electrical power of related wind turbines has been numerically calculated in the presence and absence of the nozzles between wind turbines and wind flow and it shows a dramatic increase in wind turbines power.