热处理铝合金的压痕尺寸效应

IF 1.1 Q3 METALLURGY & METALLURGICAL ENGINEERING
J. Petrík, P. Blaško, Andrea Vasilňaková, P. Demeter, P. Futas
{"title":"热处理铝合金的压痕尺寸效应","authors":"J. Petrík, P. Blaško, Andrea Vasilňaková, P. Demeter, P. Futas","doi":"10.12776/ams.v25i3.1310","DOIUrl":null,"url":null,"abstract":"The aim of the submitted work is to study the influence of applied  loads ranging from 0.09807 N to 0.9807 N on measured values of micro-hardness of heat treated aluminum alloy 6082. The influence of applied load on a measured value of micro-hardness was evaluated by Meyer’s index n, PSR method and by Analysis of Variance (ANOVA).  The influence of the load on the measured value of micro-hardness is statistically significant and the relationship between the applied load and micro-hardness manifests the moderate reverse ISE. As the temperature of the solution treatment rises, the YS/UTS ratio and also Meyer’s index n, measured and “true hardness“  increase. On the other hand, its effect on the plastic properties of the alloy is ambiguous.","PeriodicalId":44511,"journal":{"name":"Acta Metallurgica Slovaca","volume":" ","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2019-09-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"INDENTATION SIZE EFFECT OF HEAT TREATED ALUMINUM ALLOY\",\"authors\":\"J. Petrík, P. Blaško, Andrea Vasilňaková, P. Demeter, P. Futas\",\"doi\":\"10.12776/ams.v25i3.1310\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The aim of the submitted work is to study the influence of applied  loads ranging from 0.09807 N to 0.9807 N on measured values of micro-hardness of heat treated aluminum alloy 6082. The influence of applied load on a measured value of micro-hardness was evaluated by Meyer’s index n, PSR method and by Analysis of Variance (ANOVA).  The influence of the load on the measured value of micro-hardness is statistically significant and the relationship between the applied load and micro-hardness manifests the moderate reverse ISE. As the temperature of the solution treatment rises, the YS/UTS ratio and also Meyer’s index n, measured and “true hardness“  increase. On the other hand, its effect on the plastic properties of the alloy is ambiguous.\",\"PeriodicalId\":44511,\"journal\":{\"name\":\"Acta Metallurgica Slovaca\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2019-09-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Acta Metallurgica Slovaca\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.12776/ams.v25i3.1310\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Metallurgica Slovaca","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.12776/ams.v25i3.1310","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 2

摘要

本文的目的是研究0.09807 N ~ 0.9807 N的外加载荷对6082热处理铝合金显微硬度测量值的影响。采用Meyer 's指数n、PSR法和方差分析(ANOVA)评价外加载荷对显微硬度测量值的影响。载荷对显微硬度测量值的影响具有统计学意义,载荷与显微硬度之间的关系表现为中度逆ISE。随着固溶处理温度的升高,YS/UTS比、Meyer指数n、实测硬度和“真硬度”均增大。另一方面,它对合金塑性性能的影响是不明确的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
INDENTATION SIZE EFFECT OF HEAT TREATED ALUMINUM ALLOY
The aim of the submitted work is to study the influence of applied  loads ranging from 0.09807 N to 0.9807 N on measured values of micro-hardness of heat treated aluminum alloy 6082. The influence of applied load on a measured value of micro-hardness was evaluated by Meyer’s index n, PSR method and by Analysis of Variance (ANOVA).  The influence of the load on the measured value of micro-hardness is statistically significant and the relationship between the applied load and micro-hardness manifests the moderate reverse ISE. As the temperature of the solution treatment rises, the YS/UTS ratio and also Meyer’s index n, measured and “true hardness“  increase. On the other hand, its effect on the plastic properties of the alloy is ambiguous.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Acta Metallurgica Slovaca
Acta Metallurgica Slovaca METALLURGY & METALLURGICAL ENGINEERING-
CiteScore
2.00
自引率
30.00%
发文量
22
审稿时长
12 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信