The Network Structure Formation of Cu-CNTs Composites During Multi-Directional Forging Process and its Mechanical Properties

Cu–[Formula: see text] CNTs composites ([Formula: see text], 1, 2, 3 vol.%) were successfully prepared using a combination of pre-treatment, powder metallurgy and multi-directional forging processes, which provides a solution for the industrial manufacture of the composites with network CNTs structures. During the multi-directional forging process, the CNTs in the composites were distributed in a network under the synergy of metal flow and copper particle squeeze. Compared with other structure modes, the network CNTs can effectively carry and transfer loads resulting in the promotion of mechanical properties (such as, the tensile strength approximately 1.5 times higher than those of composites with the same volume fraction without network structure). The composite with 2 vol.% CNTs had the highest elongation in this experiment (41%), which is about 5 times higher than the composites with other CNTs distribution patterns. At a low CNTs content level (1[Formula: see text]vol.%), a complete load transfer network cannot be formed, resulting in a relatively insufficient mechanical properties of the composites. As the content level is exceeded (3vol.%), it caused significant agglomeration of the CNTs, which lead to fracture in the agglomerated CNTs and elongation degradation of the composites.