动态混合器混合区参数的调整及与螺旋混合器的性能比较

IF 0.6 4区 工程技术 Q4 MECHANICS
Mechanika Pub Date : 2023-08-09 DOI:10.5755/j02.mech.33213
Jiagang Sun, Jiankang Wang, Yiwen Zheng, Zhijun Li
{"title":"动态混合器混合区参数的调整及与螺旋混合器的性能比较","authors":"Jiagang Sun, Jiankang Wang, Yiwen Zheng, Zhijun Li","doi":"10.5755/j02.mech.33213","DOIUrl":null,"url":null,"abstract":"A new dynamic mixer has been designed for the mixing of two incompatible polymer melts. Three main design parameters (number of circles of holes (N), number of holes (M) per circle, and diameter of the holes (d3)) for the mixing zone of the dynamic mixer were selected to study their influences on the pressure drop (Δp) and the segregation scale (S) using Orthogonal tests. The influences of flow rate and rotational speed were also investigated. In addition, the mixing effect was compared with that of screw and slotted-screw mixers. The results showed that the most significant factor influencing S and S∙Δp is N. Both Δp and S increased with increasing flow rate, and decreased with increasing rotational speed. Compared to the screw and slotted-screw mixers, the dynamic mixer had a better mixing effect and shorter length.","PeriodicalId":54741,"journal":{"name":"Mechanika","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2023-08-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Tuning of Mixing Zone Parameters in a Dynamic Mixer and Performance Comparison with Screw-based Mixers\",\"authors\":\"Jiagang Sun, Jiankang Wang, Yiwen Zheng, Zhijun Li\",\"doi\":\"10.5755/j02.mech.33213\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A new dynamic mixer has been designed for the mixing of two incompatible polymer melts. Three main design parameters (number of circles of holes (N), number of holes (M) per circle, and diameter of the holes (d3)) for the mixing zone of the dynamic mixer were selected to study their influences on the pressure drop (Δp) and the segregation scale (S) using Orthogonal tests. The influences of flow rate and rotational speed were also investigated. In addition, the mixing effect was compared with that of screw and slotted-screw mixers. The results showed that the most significant factor influencing S and S∙Δp is N. Both Δp and S increased with increasing flow rate, and decreased with increasing rotational speed. Compared to the screw and slotted-screw mixers, the dynamic mixer had a better mixing effect and shorter length.\",\"PeriodicalId\":54741,\"journal\":{\"name\":\"Mechanika\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.6000,\"publicationDate\":\"2023-08-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Mechanika\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.5755/j02.mech.33213\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mechanika","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.5755/j02.mech.33213","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

摘要

设计了一种新的动态混合器,用于混合两种不相容的聚合物熔体。采用正交试验法,选择了动态混合器混合区的三个主要设计参数(孔圈数(N)、每圈孔数(M)和孔直径(d3)),研究了它们对压降(Δp)和偏析尺度(S)的影响。还研究了流量和转速的影响。此外,还将混合效果与螺杆和开槽螺杆混合机进行了比较。结果表明,影响S和S∙Δp的最显著因素是N。Δp和S均随流量的增加而增加,随转速的增加而减少。与螺杆和开槽螺杆混合机相比,动态混合机具有更好的混合效果和更短的长度。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Tuning of Mixing Zone Parameters in a Dynamic Mixer and Performance Comparison with Screw-based Mixers
A new dynamic mixer has been designed for the mixing of two incompatible polymer melts. Three main design parameters (number of circles of holes (N), number of holes (M) per circle, and diameter of the holes (d3)) for the mixing zone of the dynamic mixer were selected to study their influences on the pressure drop (Δp) and the segregation scale (S) using Orthogonal tests. The influences of flow rate and rotational speed were also investigated. In addition, the mixing effect was compared with that of screw and slotted-screw mixers. The results showed that the most significant factor influencing S and S∙Δp is N. Both Δp and S increased with increasing flow rate, and decreased with increasing rotational speed. Compared to the screw and slotted-screw mixers, the dynamic mixer had a better mixing effect and shorter length.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Mechanika
Mechanika 物理-力学
CiteScore
1.30
自引率
0.00%
发文量
50
审稿时长
3 months
期刊介绍: The journal is publishing scientific papers dealing with the following problems: Mechanics of Solid Bodies; Mechanics of Fluids and Gases; Dynamics of Mechanical Systems; Design and Optimization of Mechanical Systems; Mechanical Technologies.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信