{"title":"德克萨斯州中北部金县东部陆架北部河道砂岩识别的同时地震反演研究","authors":"O. Ogiesoba, Sarp Karakaya, Trey Cortez","doi":"10.1190/int-2022-0096.1","DOIUrl":null,"url":null,"abstract":"This paper documents the results of a prestack simultaneous seismic inversion conducted to investigate the Wolfcampian lower Tannehill sandstone channels within a mixed carbonate siliciclastic system in the northern Eastern Shelf in King County, North Central Texas. Previous exploration methods for the Tannehill sandstone were based largely on well-log correlation which, because of their widely spaced sample points, are not optimal for channel delineation. We have generated crossplots of P- and S-wave velocity ratios ( VP/ VS ratios) versus P-impedance to determine lithologic types. We then used 3D seismic data and wireline logs to implement a prestack simultaneous seismic inversion procedure to generate P- and S-impedances, density, and VP/ VS ratio volumes to identify the valley-fill Tannehill lowstand systems. Our results find that (1) based on impedance and density, the sandstone-rich channels can be easily separated from the carbonate-rich zones but are difficult to distinguish using VP/ VS. (2) Although there appeared to be several channel systems in the area of investigation, two of these, hereby referred to as channel A and channel B, are recognized to be the key contributors of sandstone sediments to the shelf edge, slope, and basin areas. (3) Of these two channels, channel A is the larger and highly sinuous; it is associated with a meander loop, a point bar, and an abandoned channel. At the point-bar location, channel A has a width of 890 m (2920 ft) and a depth of 29 m (94 ft). The point bar is structurally anticlinal and thus constitutes a potential exploration target. In contrast, channel B is less sinuous, without any associated point bar. It has a maximum depth and width of 23 m (75 ft) and 270 m (886 ft), respectively. Finally, the inversion results suggest that other potential Tannehill sandstone reservoirs may still be present elsewhere within King County.","PeriodicalId":51318,"journal":{"name":"Interpretation-A Journal of Subsurface Characterization","volume":" ","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2023-03-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Simultaneous seismic inversion study for channel sandstone identification, northern part of the Eastern Shelf, King County, North-Central Texas\",\"authors\":\"O. Ogiesoba, Sarp Karakaya, Trey Cortez\",\"doi\":\"10.1190/int-2022-0096.1\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper documents the results of a prestack simultaneous seismic inversion conducted to investigate the Wolfcampian lower Tannehill sandstone channels within a mixed carbonate siliciclastic system in the northern Eastern Shelf in King County, North Central Texas. Previous exploration methods for the Tannehill sandstone were based largely on well-log correlation which, because of their widely spaced sample points, are not optimal for channel delineation. We have generated crossplots of P- and S-wave velocity ratios ( VP/ VS ratios) versus P-impedance to determine lithologic types. We then used 3D seismic data and wireline logs to implement a prestack simultaneous seismic inversion procedure to generate P- and S-impedances, density, and VP/ VS ratio volumes to identify the valley-fill Tannehill lowstand systems. Our results find that (1) based on impedance and density, the sandstone-rich channels can be easily separated from the carbonate-rich zones but are difficult to distinguish using VP/ VS. (2) Although there appeared to be several channel systems in the area of investigation, two of these, hereby referred to as channel A and channel B, are recognized to be the key contributors of sandstone sediments to the shelf edge, slope, and basin areas. (3) Of these two channels, channel A is the larger and highly sinuous; it is associated with a meander loop, a point bar, and an abandoned channel. At the point-bar location, channel A has a width of 890 m (2920 ft) and a depth of 29 m (94 ft). The point bar is structurally anticlinal and thus constitutes a potential exploration target. In contrast, channel B is less sinuous, without any associated point bar. It has a maximum depth and width of 23 m (75 ft) and 270 m (886 ft), respectively. Finally, the inversion results suggest that other potential Tannehill sandstone reservoirs may still be present elsewhere within King County.\",\"PeriodicalId\":51318,\"journal\":{\"name\":\"Interpretation-A Journal of Subsurface Characterization\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-03-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Interpretation-A Journal of Subsurface Characterization\",\"FirstCategoryId\":\"89\",\"ListUrlMain\":\"https://doi.org/10.1190/int-2022-0096.1\",\"RegionNum\":4,\"RegionCategory\":\"地球科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"GEOCHEMISTRY & GEOPHYSICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Interpretation-A Journal of Subsurface Characterization","FirstCategoryId":"89","ListUrlMain":"https://doi.org/10.1190/int-2022-0096.1","RegionNum":4,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"GEOCHEMISTRY & GEOPHYSICS","Score":null,"Total":0}
Simultaneous seismic inversion study for channel sandstone identification, northern part of the Eastern Shelf, King County, North-Central Texas
This paper documents the results of a prestack simultaneous seismic inversion conducted to investigate the Wolfcampian lower Tannehill sandstone channels within a mixed carbonate siliciclastic system in the northern Eastern Shelf in King County, North Central Texas. Previous exploration methods for the Tannehill sandstone were based largely on well-log correlation which, because of their widely spaced sample points, are not optimal for channel delineation. We have generated crossplots of P- and S-wave velocity ratios ( VP/ VS ratios) versus P-impedance to determine lithologic types. We then used 3D seismic data and wireline logs to implement a prestack simultaneous seismic inversion procedure to generate P- and S-impedances, density, and VP/ VS ratio volumes to identify the valley-fill Tannehill lowstand systems. Our results find that (1) based on impedance and density, the sandstone-rich channels can be easily separated from the carbonate-rich zones but are difficult to distinguish using VP/ VS. (2) Although there appeared to be several channel systems in the area of investigation, two of these, hereby referred to as channel A and channel B, are recognized to be the key contributors of sandstone sediments to the shelf edge, slope, and basin areas. (3) Of these two channels, channel A is the larger and highly sinuous; it is associated with a meander loop, a point bar, and an abandoned channel. At the point-bar location, channel A has a width of 890 m (2920 ft) and a depth of 29 m (94 ft). The point bar is structurally anticlinal and thus constitutes a potential exploration target. In contrast, channel B is less sinuous, without any associated point bar. It has a maximum depth and width of 23 m (75 ft) and 270 m (886 ft), respectively. Finally, the inversion results suggest that other potential Tannehill sandstone reservoirs may still be present elsewhere within King County.
期刊介绍:
***Jointly published by the American Association of Petroleum Geologists (AAPG) and the Society of Exploration Geophysicists (SEG)***
Interpretation is a new, peer-reviewed journal for advancing the practice of subsurface interpretation.