用氯化亚铜选择性氯化黄铜矿生产辉铜矿

Q2 Materials Science

Minerals & Metallurgical Processing Pub Date : 2017-05-01 DOI:10.19150/MMP.7507

J. Kang, J. Lee

{"title":"用氯化亚铜选择性氯化黄铜矿生产辉铜矿","authors":"J. Kang, J. Lee","doi":"10.19150/MMP.7507","DOIUrl":null,"url":null,"abstract":"A selective chlorination process using cuprous chloride (CuCl) was investigated for producing high-grade chalcocite (Cu2S) from chalcopyrite (CuFeS2) feed. The chalcopyrite feed was reacted with CuCl in the presence or absence of sulfur (S) at temperatures between 900 and 1,100 K for five hours under an argon gas atmosphere. The experimental results indicate that iron (Fe) was selectively removed from the chalcopyrite feed as ferrous chloride (FeCl2) at 1,100 K and the mass percentage of Fe thus decreased from 31.5 percent in the feed to less than 0.05 percent in the residue, under certain conditions. As a result, high-grade Cu2S was obtained from chalcopyrite in a single step. This new selective chlorination of chalcopyrite using CuCl as a chlorinating agent is therefore feasible for producing high-grade Cu2S.","PeriodicalId":18536,"journal":{"name":"Minerals & Metallurgical Processing","volume":"34 1","pages":"76-83"},"PeriodicalIF":0.0000,"publicationDate":"2017-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.19150/MMP.7507","citationCount":"2","resultStr":"{\"title\":\"Production of chalcocite by selective chlorination of chalcopyrite using cuprous chloride\",\"authors\":\"J. Kang, J. Lee\",\"doi\":\"10.19150/MMP.7507\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A selective chlorination process using cuprous chloride (CuCl) was investigated for producing high-grade chalcocite (Cu2S) from chalcopyrite (CuFeS2) feed. The chalcopyrite feed was reacted with CuCl in the presence or absence of sulfur (S) at temperatures between 900 and 1,100 K for five hours under an argon gas atmosphere. The experimental results indicate that iron (Fe) was selectively removed from the chalcopyrite feed as ferrous chloride (FeCl2) at 1,100 K and the mass percentage of Fe thus decreased from 31.5 percent in the feed to less than 0.05 percent in the residue, under certain conditions. As a result, high-grade Cu2S was obtained from chalcopyrite in a single step. This new selective chlorination of chalcopyrite using CuCl as a chlorinating agent is therefore feasible for producing high-grade Cu2S.\",\"PeriodicalId\":18536,\"journal\":{\"name\":\"Minerals & Metallurgical Processing\",\"volume\":\"34 1\",\"pages\":\"76-83\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-05-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.19150/MMP.7507\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Minerals & Metallurgical Processing\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.19150/MMP.7507\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"Materials Science\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Minerals & Metallurgical Processing","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.19150/MMP.7507","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Materials Science","Score":null,"Total":0}

引用次数: 2

摘要

以黄铜矿（CuFeS2）为原料，采用氯化亚铜（CuCl）选择性氯化工艺生产高品位辉铜矿（Cu2S）。黄铜矿进料在存在或不存在硫（S）的情况下，在氩气气氛下，在900和1100K之间的温度下与CuCl反应5小时。实验结果表明，在1100K下，铁（Fe）以氯化亚铁（FeCl2）的形式从黄铜矿进料中被选择性地去除，因此在某些条件下，Fe的质量百分比从进料中的31.5%降低到残渣中的小于0.05%。结果，在一个步骤中从黄铜矿获得了高品位的Cu2S。因此，使用CuCl作为氯化剂对黄铜矿进行这种新的选择性氯化对于生产高品位Cu2S是可行的。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Production of chalcocite by selective chlorination of chalcopyrite using cuprous chloride

A selective chlorination process using cuprous chloride (CuCl) was investigated for producing high-grade chalcocite (Cu2S) from chalcopyrite (CuFeS2) feed. The chalcopyrite feed was reacted with CuCl in the presence or absence of sulfur (S) at temperatures between 900 and 1,100 K for five hours under an argon gas atmosphere. The experimental results indicate that iron (Fe) was selectively removed from the chalcopyrite feed as ferrous chloride (FeCl2) at 1,100 K and the mass percentage of Fe thus decreased from 31.5 percent in the feed to less than 0.05 percent in the residue, under certain conditions. As a result, high-grade Cu2S was obtained from chalcopyrite in a single step. This new selective chlorination of chalcopyrite using CuCl as a chlorinating agent is therefore feasible for producing high-grade Cu2S.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Minerals & Metallurgical Processing 工程技术-矿业与矿物加工

CiteScore

0.84

自引率

0.00%

发文量

审稿时长

>12 weeks

期刊介绍： For over twenty-five years, M&MP has been your source for the newest thinking in the processing of minerals and metals. We cover the latest developments in a wide range of applicable disciplines, from metallurgy to computer science to environmental engineering. Our authors, experts from industry, academia and the government, present state-of-the-art research from around the globe.