{"title":"通过使用棕榈树修剪废料作为隔热材料来提高冷藏仓库的能源效率","authors":"H. Lakrafli, S. Tahiri, M. Sennoune, A. Bouardi","doi":"10.18186/thermal.1283362","DOIUrl":null,"url":null,"abstract":"This work investigates the effect of palm tree pruning waste (PTPW) on thermal insulation and energy consumption of a refrigerated warehouse (RW). The thermal properties of PTPW depend strongly on its compactness, i.e. how much it weighs divided by how much space it takes up. The thermal conductivity of PTPW measured using the box method is about 0.069 W/m °C for a mass/occupied volume ratio of 0.064 g/cm3. It is comparable or lower than that of other natural materials discussed in the literature. The dynamic thermal simulation tool “TRNSYS” was applied to predict the thermal behavior of RW. The thickness of PTPW material was considered as variant to choose the better condition allowing achieving results very close to those of polyurethane. Obtained results highlight that 30 cm thick PTPW can reduce temperature by 1 to 2°C compared to 10 cm thick polyurethane. An improvement in the energy efficiency of the refrigerated warehouse was also highlighted. So, because of its performance, low cost, and eco-friendly nature, PTPW can compete with conventional insulating materials.","PeriodicalId":45841,"journal":{"name":"Journal of Thermal Engineering","volume":" ","pages":""},"PeriodicalIF":1.1000,"publicationDate":"2023-04-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Improving the energy efficiency of a refrigerated warehouse through the use of palm tree pruning waste as thermal insulator\",\"authors\":\"H. Lakrafli, S. Tahiri, M. Sennoune, A. Bouardi\",\"doi\":\"10.18186/thermal.1283362\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work investigates the effect of palm tree pruning waste (PTPW) on thermal insulation and energy consumption of a refrigerated warehouse (RW). The thermal properties of PTPW depend strongly on its compactness, i.e. how much it weighs divided by how much space it takes up. The thermal conductivity of PTPW measured using the box method is about 0.069 W/m °C for a mass/occupied volume ratio of 0.064 g/cm3. It is comparable or lower than that of other natural materials discussed in the literature. The dynamic thermal simulation tool “TRNSYS” was applied to predict the thermal behavior of RW. The thickness of PTPW material was considered as variant to choose the better condition allowing achieving results very close to those of polyurethane. Obtained results highlight that 30 cm thick PTPW can reduce temperature by 1 to 2°C compared to 10 cm thick polyurethane. An improvement in the energy efficiency of the refrigerated warehouse was also highlighted. So, because of its performance, low cost, and eco-friendly nature, PTPW can compete with conventional insulating materials.\",\"PeriodicalId\":45841,\"journal\":{\"name\":\"Journal of Thermal Engineering\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":1.1000,\"publicationDate\":\"2023-04-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Thermal Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.18186/thermal.1283362\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Thermal Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.18186/thermal.1283362","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
Improving the energy efficiency of a refrigerated warehouse through the use of palm tree pruning waste as thermal insulator
This work investigates the effect of palm tree pruning waste (PTPW) on thermal insulation and energy consumption of a refrigerated warehouse (RW). The thermal properties of PTPW depend strongly on its compactness, i.e. how much it weighs divided by how much space it takes up. The thermal conductivity of PTPW measured using the box method is about 0.069 W/m °C for a mass/occupied volume ratio of 0.064 g/cm3. It is comparable or lower than that of other natural materials discussed in the literature. The dynamic thermal simulation tool “TRNSYS” was applied to predict the thermal behavior of RW. The thickness of PTPW material was considered as variant to choose the better condition allowing achieving results very close to those of polyurethane. Obtained results highlight that 30 cm thick PTPW can reduce temperature by 1 to 2°C compared to 10 cm thick polyurethane. An improvement in the energy efficiency of the refrigerated warehouse was also highlighted. So, because of its performance, low cost, and eco-friendly nature, PTPW can compete with conventional insulating materials.
期刊介绍:
Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience. In order to achieve this goal, we will have applied for SCI-Expanded Index in 2021 after having an Impact Factor in 2020. The aim of the journal, published on behalf of Yildiz Technical University in Istanbul-Turkey, is to not only include actual, original and applied studies prepared on the sciences of heat transfer and thermodynamics, and contribute to the literature of engineering sciences on the national and international areas but also help the development of Mechanical Engineering. Engineers and academicians from disciplines of Power Plant Engineering, Energy Engineering, Building Services Engineering, HVAC Engineering, Solar Engineering, Wind Engineering, Nanoengineering, surface engineering, thin film technologies, and Computer Aided Engineering will be expected to benefit from this journal’s outputs.