Design of Polymer-Based Trigate Nanoscale FinFET for the Implementation of Two-Stage Operational Amplifier

The major motivation behind transistor scaling is the requirement for high-speed transistors with lower fabrication costs. When the fin thickness or breadth is smaller than 10 nm in a trigate FET, charges travel in a nonconfined fashion, resulting in the creation of energy subbands and causing volume inversion. In comparison to the carrier near a surface inversion layer, volume inversion experiences less interface scattering. In large-scale integrations, we have focused on developing a 3D model for surface potential by establishing the three-dimensional Poison’s equation and building a unique fin field-effect transistor (FinFET) structure. In this context, there is a growing interest in developing a low-cost, simple solution that combines plastic (polymer) as a substrate and organic materials to create electronics such as monitors and sensors. The research examines characteristics such as silicon width, oxide thickness, doping concentration, metal work-function about gate, and various surface potentials. For different circuit configurations, it also examines the DC and AC characteristics of the FinFET structure. A differential amplifier is built for RF application based on the device specifications. This work is aimed at improving the semiconductor design structure by adjusting device parameters, analyzing the results, establishing the best FinFET device preferences, and selecting an application for the optimized device. The 3D Poisson’s equation may be used to create an analytical model of a trigate nanosize FinFET, which can then be tested using a TCAD simulator. By constructing such a FinFET, we can structure and analyze various electrostatic parameters. To facilitate the creation of FinFET-based circuits, including product development, a novel transistor needs a creative device basis. The infrastructure’s support denotes a computationally advantageous numerical model that accurately depicts a FinFET. The work presents a compact model for semiconductor manufacturing that permits separate IC productions while achieving higher levels of excellence and using less power. The design outperforms the CMOS by 22.7% in gain, 31.48% in power consumption, and 12.72% in CMRR, while operating at a 5 GHz unity gain frequency.