Alkali Metal Cation Incorporated Ag3BiI6 Absorbers for Efficient and Stable Rudorffite Solar Cells

Toxic lead and poor stability are the main obstacles of perovskite solar cells. Lead-free silver bismuth iodide (SBI) was first attempted as solar cells photovoltaic materials in 2016. However, the short-circuit current of the SBI rudorffite materials is commonly below 10 mA/cm2, limiting the overall photovoltaic performance. Here, we present a chemical composition engineering to enhance the photovoltaic performance. In this study, we incorporated a series of alkali metal cations (Li+, Na+, K+, Rb+, and Cs+) into Ag3BiI6 absorbers to investigate the effects on the photovoltaic performance of rudorffite solar cells. Cs+ doping improved VOC and Na+ doping showed an obvious enhancement in JSC. Therefore, we co-doped Na+ and Cs+ into SBI (Na/Cs-SBI) as the absorber and investigated the crystal structure, surface morphology, and optical properties. The photo-assisted Kelvin probe force microscopy (photo-KPFM) was used to measure surface potential and verified that Na/Cs doping could reduce the electron trapping at the grain boundary and facilitate electron transportation. Na/Cs-SBI reduced the electron-holes pairs recombination and promoted the carrier transport of rudorffite solar cells. Finally, the Na/Cs-SBI rudorffite solar cell exhibited a PCE of 2.50%, a 46.0% increase to the SBI device (PCE = 1.71%), and was stable in ambient conditions for over 6 months.