添加玻璃纤维和SiC颗粒对槟榔细纤维增强酚醛复合材料力学性能和切削性能的影响

IF 0.6 4区工程技术 Q4 MECHANICS

Mechanika Pub Date : 2022-08-30 DOI:10.5755/j02.mech.25443

Athijayamani Athijayamani, P. Muthusamy, Sidhardhan Susaiyappan

{"title":"添加玻璃纤维和SiC颗粒对槟榔细纤维增强酚醛复合材料力学性能和切削性能的影响","authors":"Athijayamani Athijayamani, P. Muthusamy, Sidhardhan Susaiyappan","doi":"10.5755/j02.mech.25443","DOIUrl":null,"url":null,"abstract":"In the present experimental study the effects of addition of Glass Fibers (GFs) and Silicon Carbide (SiC) particles on the mechanical and machinability behaviors of Areca Fine Fiber (AFF)-reinforced Phenol Formaldehyde (PF) composites were evaluated in three stages. Composites were prepared by hand lay-up technique at room temperature. From the first stage, it is observed that the 20AFF/20GF/PF hybrid composites give better mechanical properties than the other hybrid composites followed by the 10AFF/30GF/PF hybrid composite. The results of second stage revealed that the AFF/GF/SiC/PF hybrid composites exhibited the highest values of mechanical properties after addition of the 6% of SiC particles. From third stage, it is observed that the cutting speed is most significant process parameter during drilling of the 20AFF/20GF/6SiC/PF hybrid composite, followed by feed rate.","PeriodicalId":54741,"journal":{"name":"Mechanika","volume":" ","pages":""},"PeriodicalIF":0.6000,"publicationDate":"2022-08-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effects of Addition of Glass Fibers and SiC Particles on the Mechanical and Machinability Behaviours of Areca Fine Fiber-Reinforced Phenol Formaldehyde Composite\",\"authors\":\"Athijayamani Athijayamani, P. Muthusamy, Sidhardhan Susaiyappan\",\"doi\":\"10.5755/j02.mech.25443\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In the present experimental study the effects of addition of Glass Fibers (GFs) and Silicon Carbide (SiC) particles on the mechanical and machinability behaviors of Areca Fine Fiber (AFF)-reinforced Phenol Formaldehyde (PF) composites were evaluated in three stages. Composites were prepared by hand lay-up technique at room temperature. From the first stage, it is observed that the 20AFF/20GF/PF hybrid composites give better mechanical properties than the other hybrid composites followed by the 10AFF/30GF/PF hybrid composite. The results of second stage revealed that the AFF/GF/SiC/PF hybrid composites exhibited the highest values of mechanical properties after addition of the 6% of SiC particles. From third stage, it is observed that the cutting speed is most significant process parameter during drilling of the 20AFF/20GF/6SiC/PF hybrid composite, followed by feed rate.\",\"PeriodicalId\":54741,\"journal\":{\"name\":\"Mechanika\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.6000,\"publicationDate\":\"2022-08-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Mechanika\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.5755/j02.mech.25443\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mechanika","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.5755/j02.mech.25443","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MECHANICS","Score":null,"Total":0}

引用次数: 0

摘要

在本实验研究中，分三个阶段评估了玻璃纤维（GFs）和碳化硅（SiC）颗粒的添加对槟榔细纤维（AFF）增强酚醛树脂（PF）复合材料力学和机械加工性能的影响。在室温下采用手工叠层技术制备了复合材料。从第一阶段开始，观察到20AFF/20GF/PF杂化复合材料比其他杂化复合材料具有更好的机械性能，其次是10AFF/30GF/PF共混复合材料。第二阶段的结果表明，添加6%的SiC颗粒后，AFF/GF/SiC/PF杂化复合材料的力学性能最高。从第三阶段开始，观察到切削速度是20AFF/20GF/6SiC/PF复合材料钻孔过程中最重要的工艺参数，其次是进给速度。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effects of Addition of Glass Fibers and SiC Particles on the Mechanical and Machinability Behaviours of Areca Fine Fiber-Reinforced Phenol Formaldehyde Composite

In the present experimental study the effects of addition of Glass Fibers (GFs) and Silicon Carbide (SiC) particles on the mechanical and machinability behaviors of Areca Fine Fiber (AFF)-reinforced Phenol Formaldehyde (PF) composites were evaluated in three stages. Composites were prepared by hand lay-up technique at room temperature. From the first stage, it is observed that the 20AFF/20GF/PF hybrid composites give better mechanical properties than the other hybrid composites followed by the 10AFF/30GF/PF hybrid composite. The results of second stage revealed that the AFF/GF/SiC/PF hybrid composites exhibited the highest values of mechanical properties after addition of the 6% of SiC particles. From third stage, it is observed that the cutting speed is most significant process parameter during drilling of the 20AFF/20GF/6SiC/PF hybrid composite, followed by feed rate.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Mechanika 物理-力学

CiteScore

1.30

自引率

0.00%

发文量

审稿时长

3 months

期刊介绍： The journal is publishing scientific papers dealing with the following problems: Mechanics of Solid Bodies; Mechanics of Fluids and Gases; Dynamics of Mechanical Systems; Design and Optimization of Mechanical Systems; Mechanical Technologies.