Gun Gun R Gunadi, Jusafwar, Candra Damis Widiawaty, Machfud Priyo Utomo, Ramdana Ajie Satria, Muhammad Raihan Abimanyu, Adi Syuriadi, Dianta Mustofa Kamal, Rosidi
{"title":"Pengembangan Model Pembangkit Listrik Tenaga Picohydro Tipe Turbin Cross Flow Head Rendah","authors":"Gun Gun R Gunadi, Jusafwar, Candra Damis Widiawaty, Machfud Priyo Utomo, Ramdana Ajie Satria, Muhammad Raihan Abimanyu, Adi Syuriadi, Dianta Mustofa Kamal, Rosidi","doi":"10.35970/infotekmesin.v13i2.1527","DOIUrl":null,"url":null,"abstract":"The provision of food, energy supply, and the provision of information are The food provision, energy supply, and information delivery are controlled to improve people's welfare. In 2011, the national electricity production by PLN was 11% new and renewable energy. 6% hydropower and 5% geothermal. PLN plans the geothermal to be 13% and hydropower to be 6%. The availability of independent PhPP has been built by many communities. PhPP with a waterwheel drive provides a capacity of about 100 watts thus it is only enough for home lighting, whereas the hydro energy potential of the area is quite abundant. The development that has been carried out has several weaknesses; PhPP plump turbine type requires a high head which becomes a constraint for agricultural irrigation, in the other hand PhPP waterwheel type has low efficiency. The research was conducted to develop PhPP low head cross-flow turbine type, which is more efficient. The development begins with the experiment of the PhPP cross-flow turbine model to optimize the ratio of the diameter and width of the runner. A preliminary case study provides experimental results for a cross-flow turbine's torque and power parameters at a flow rate of 0.053 m3/s. Changes in the turbine diameter and width ratio are optimum at a runner width of 10 cm.","PeriodicalId":33598,"journal":{"name":"Infotekmesin Media Komunikasi Ilmiah Politeknik Cilacap","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2022-07-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Infotekmesin Media Komunikasi Ilmiah Politeknik Cilacap","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.35970/infotekmesin.v13i2.1527","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

食品供应、能源供应和信息提供是对食品供应、能量供应和信息传递进行控制,以改善人们的福利。2011年,印尼国家电力公司的全国电力产量为11%的新能源和可再生能源。6%的水电和5%的地热。印尼国家电力公司计划地热发电占13%,水电发电占6%。许多社区建立了独立的PhPP。带有水车驱动的PhPP提供了大约100瓦的容量,因此它只够家庭照明,而该地区的水能潜力相当丰富。已经进行的发展有几个弱点;PhPP丰满型水轮机需要高水头,这成为农业灌溉的制约因素,而PhPP水轮机效率较低。研究开发了效率更高的PhPP低水头贯流式水轮机。开发开始于PhPP横流涡轮机模型的实验,以优化转轮的直径和宽度比。初步案例研究提供了流量为0.053m3/s时横流涡轮机扭矩和功率参数的实验结果。转轮宽度为10cm时,涡轮机直径和宽度比的变化是最佳的。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Pengembangan Model Pembangkit Listrik Tenaga Picohydro Tipe Turbin Cross Flow Head Rendah
The provision of food, energy supply, and the provision of information are The food provision, energy supply, and information delivery are controlled to improve people's welfare. In 2011, the national electricity production by PLN was 11% new and renewable energy. 6% hydropower and 5% geothermal. PLN plans the geothermal to be 13% and hydropower to be 6%. The availability of independent PhPP has been built by many communities. PhPP with a waterwheel drive provides a capacity of about 100 watts thus it is only enough for home lighting, whereas the hydro energy potential of the area is quite abundant. The development that has been carried out has several weaknesses; PhPP plump turbine type requires a high head which becomes a constraint for agricultural irrigation, in the other hand PhPP waterwheel type has low efficiency. The research was conducted to develop PhPP low head cross-flow turbine type, which is more efficient. The development begins with the experiment of the PhPP cross-flow turbine model to optimize the ratio of the diameter and width of the runner. A preliminary case study provides experimental results for a cross-flow turbine's torque and power parameters at a flow rate of 0.053 m3/s. Changes in the turbine diameter and width ratio are optimum at a runner width of 10 cm.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
30
审稿时长
12 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信