THE INFLUENCE OF LASER PEENING PULSE NUMBER ON HARDNESS, RESIDUAL STRESS AND ADHESIVE WEAR OF AISI 316l STAINLESS STEEL

Improvement of Wear adhesive properties using laser peening treatment at varied number ofpulse of Austenitic stainless 316L is studied. According to typical ASTM G99-05 number ofwear inspection test are prepared in dimensions 20x10 mm then compiled into four groups.The surface test of three groups is exposed to a number of laser pulse 1, 2, 4 pulsesrespectively by laser peening without coating. Microstructure, residual stress, hardness, istested. Wear test using pin on disc method are used on all groups of specimens at twoparameters, diverse times 10 ,20,30 min with constant load 1kg , and divers load 1,1.5, 2kg with constant time 10 min. from results it was concluded that decrease in hardness andrises in ductility shared to increases in wear properties for the original metal and leaserpeening participated to rise in the wear resistance due to increase in hardness , compressionresidual stress and the heterogeneity of the evidence in the microstructure ,four pulse laserpeening give the lowest wear rate comparing with one pulse which witness decreases inwear rate.