Jonathan G Pavlinec, Andrew K Rabley, Ashley O Gordon, Jennifer Kuo, Vincent G Bird
{"title":"用环形聚四氟乙烯包覆导丝经皮切除残留金属输尿管支架。","authors":"Jonathan G Pavlinec, Andrew K Rabley, Ashley O Gordon, Jennifer Kuo, Vincent G Bird","doi":"10.1089/cren.2020.0115","DOIUrl":null,"url":null,"abstract":"<p><p><b><i>Background:</i></b> Ureteral stricture disease is a troubling urologic issue that can be managed with surgical reconstruction or, more conservatively, with chronic nephrostomy tubes or ureteral stents. These indwelling tubes require exchanges and are prone to complications such as encrustation or stent failure. Metallic ureteral stents are designed to be more resistant to extrinsic compression and allow for exchanges at longer intervals. However, encrustation or tissue ingrowth can occur with these stents as well. The removal of encrusted or embedded metallic ureteral stents poses a difficult clinical scenario. We present a case of an encrusted metallic stent embedded in a proximal ureteral stricture requiring percutaneous endoscopic removal with a novel looped-wire technique. <b><i>Case Presentation:</i></b> A 50-year-old Caucasian man with bilateral ureteral stricture disease, managed with chronic indwelling metallic stents, failed retrograde removal on the right during routine exchange. Staged procedures with percutaneous nephrostomy, followed by combined percutaneous antegrade and retrograde endoscopy were required to observe and access the embedded stent. The exposed metallic surface was unable to be grasped by available instruments through flexible endoscopy. Under endoscopic control with fluoroscopic guidance, a polytetrafluoroethylene (PTFE)-coated guidewire was looped around the metallic stent. With gentle traction on the wire loop, the embedded stent curl was delivered out of the stricture and into the renal pelvis from where it was extracted carefully with graspers inserted through a rigid nephroscope. Follow-up antegrade fluoroscopic studies with contrast showed no extravasation. <b><i>Conclusion:</i></b> Percutaneous removal of metallic stents retained within the ureter has unique challenges. We present a novel method of extraction of a retained metallic stent with a looped PTFE-coated guidewire, which may safely and effectively be used in complex situations.</p>","PeriodicalId":36779,"journal":{"name":"Journal of Endourology Case Reports","volume":"6 4","pages":"328-331"},"PeriodicalIF":0.0000,"publicationDate":"2020-12-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1089/cren.2020.0115","citationCount":"0","resultStr":"{\"title\":\"Percutaneous Removal of Retained Metallic Ureteral Stent with a Looped Polytetrafluoroethylene-Coated Guidewire.\",\"authors\":\"Jonathan G Pavlinec, Andrew K Rabley, Ashley O Gordon, Jennifer Kuo, Vincent G Bird\",\"doi\":\"10.1089/cren.2020.0115\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p><b><i>Background:</i></b> Ureteral stricture disease is a troubling urologic issue that can be managed with surgical reconstruction or, more conservatively, with chronic nephrostomy tubes or ureteral stents. These indwelling tubes require exchanges and are prone to complications such as encrustation or stent failure. Metallic ureteral stents are designed to be more resistant to extrinsic compression and allow for exchanges at longer intervals. However, encrustation or tissue ingrowth can occur with these stents as well. The removal of encrusted or embedded metallic ureteral stents poses a difficult clinical scenario. We present a case of an encrusted metallic stent embedded in a proximal ureteral stricture requiring percutaneous endoscopic removal with a novel looped-wire technique. <b><i>Case Presentation:</i></b> A 50-year-old Caucasian man with bilateral ureteral stricture disease, managed with chronic indwelling metallic stents, failed retrograde removal on the right during routine exchange. Staged procedures with percutaneous nephrostomy, followed by combined percutaneous antegrade and retrograde endoscopy were required to observe and access the embedded stent. The exposed metallic surface was unable to be grasped by available instruments through flexible endoscopy. Under endoscopic control with fluoroscopic guidance, a polytetrafluoroethylene (PTFE)-coated guidewire was looped around the metallic stent. With gentle traction on the wire loop, the embedded stent curl was delivered out of the stricture and into the renal pelvis from where it was extracted carefully with graspers inserted through a rigid nephroscope. Follow-up antegrade fluoroscopic studies with contrast showed no extravasation. <b><i>Conclusion:</i></b> Percutaneous removal of metallic stents retained within the ureter has unique challenges. We present a novel method of extraction of a retained metallic stent with a looped PTFE-coated guidewire, which may safely and effectively be used in complex situations.</p>\",\"PeriodicalId\":36779,\"journal\":{\"name\":\"Journal of Endourology Case Reports\",\"volume\":\"6 4\",\"pages\":\"328-331\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-12-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1089/cren.2020.0115\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Endourology Case Reports\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1089/cren.2020.0115\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"2020/1/1 0:00:00\",\"PubModel\":\"eCollection\",\"JCR\":\"Q4\",\"JCRName\":\"Medicine\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Endourology Case Reports","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1089/cren.2020.0115","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2020/1/1 0:00:00","PubModel":"eCollection","JCR":"Q4","JCRName":"Medicine","Score":null,"Total":0}
Percutaneous Removal of Retained Metallic Ureteral Stent with a Looped Polytetrafluoroethylene-Coated Guidewire.
Background: Ureteral stricture disease is a troubling urologic issue that can be managed with surgical reconstruction or, more conservatively, with chronic nephrostomy tubes or ureteral stents. These indwelling tubes require exchanges and are prone to complications such as encrustation or stent failure. Metallic ureteral stents are designed to be more resistant to extrinsic compression and allow for exchanges at longer intervals. However, encrustation or tissue ingrowth can occur with these stents as well. The removal of encrusted or embedded metallic ureteral stents poses a difficult clinical scenario. We present a case of an encrusted metallic stent embedded in a proximal ureteral stricture requiring percutaneous endoscopic removal with a novel looped-wire technique. Case Presentation: A 50-year-old Caucasian man with bilateral ureteral stricture disease, managed with chronic indwelling metallic stents, failed retrograde removal on the right during routine exchange. Staged procedures with percutaneous nephrostomy, followed by combined percutaneous antegrade and retrograde endoscopy were required to observe and access the embedded stent. The exposed metallic surface was unable to be grasped by available instruments through flexible endoscopy. Under endoscopic control with fluoroscopic guidance, a polytetrafluoroethylene (PTFE)-coated guidewire was looped around the metallic stent. With gentle traction on the wire loop, the embedded stent curl was delivered out of the stricture and into the renal pelvis from where it was extracted carefully with graspers inserted through a rigid nephroscope. Follow-up antegrade fluoroscopic studies with contrast showed no extravasation. Conclusion: Percutaneous removal of metallic stents retained within the ureter has unique challenges. We present a novel method of extraction of a retained metallic stent with a looped PTFE-coated guidewire, which may safely and effectively be used in complex situations.