Impact of carbon nanotubes concentrations on the performance of carbon nanotubes/zinc oxide nanocomposite for photoelectrochemical water splitting

Under the influence of visible light, the photoelectrochemical (PEC) method of water splitting offers a green method for producing sustainable hydrogen. In this work, several volume ratios of carbon nanotubes (CNTs) were incorporated in the zinc oxide (ZnO) matrix to prepare ZnO/CNTs nanocomposites on a glass substrate as photoelectrodes for hydrogen production. These electrodes were synthesized via the spray pyrolysis technique and chemical vapor deposition. Various approaches were used to analyze the chemical composition, crystal structure, morphology, and optical properties of pure ZnO and ZnO/CNTs nanocomposites. The structural properties showed that crystallite size is decreased from 44.2 nm to 36.8 nm, and the optical shows that the energy bandgap (Eg) enhanced from 3.07 to 2.87 eV for pure ZnO and the optimum sample of ZnO/7 mL CNTs nanocomposite, respectively. The maximum photocurrent density (Jph) was found for the 7 mL CNTs among the produced ZnO/X CNTs nanostructures. The value of Jph for ZnO/7 mL CNTs (200.7 µA/cm²) is around 33 times greater compared with pure ZnO (6.96 µA/cm²). At 490 nm, the incident photon-to-current efficiency (IPCE) of ZnO/7 mL CNTs is roughly 9.85 %. The ZnO/CNTs photoelectrode showed a hydrogen evolution rate of 4.34 mmole/h.cm². The improved photoelectrode additionally exhibits strong chemical stability and a lengthy lifetime under visible light without photo-corrosion. Finally, the electrochemical impedance spectroscopy and the PEC water-splitting mechanism for ZnO/CNTs were discussed. This study presents a simple method that enables the fabrication of inexpensive and efficient ZnO/CNTs photoelectrode for renewable energy applications.