{"title":"通过硅水MD系统与各种合金进行树脂粘合。","authors":"G Iazzetti, M João, O Chevitarese, S Lacroix","doi":"","DOIUrl":null,"url":null,"abstract":"<p><p>The aim of this research was to evaluate the effectiveness of the Silicoater MD System for bonding resin to four different Brazilian alloys. The alloys included the following proprietary materials: Duracast, Durabond II, Palad and Premium. Biobond II, a popular nickel-chromium alloy has been used as control. Dentacolor served as the veneering agent. All specimens were thermo-cycled for 24 hours between 41 degrees and 131 degrees C at a dwell time of one minute per temperature. Shear-bond strengths ranged from 1667 to 2842 psi. Scanning electron microscopic evaluation demonstrated no gap formations at the resin/metal interface for all of the aforementioned systems, the Silicoater MD System demonstrated acceptable retention efficiency in five types of metallic alloys.</p>","PeriodicalId":79504,"journal":{"name":"Journal of dental technology : the peer-reviewed publication of the National Association of Dental Laboratories","volume":"16 3","pages":"11-4"},"PeriodicalIF":0.0000,"publicationDate":"1999-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Resin bonding to various alloys by means of the Silicoater MD System.\",\"authors\":\"G Iazzetti, M João, O Chevitarese, S Lacroix\",\"doi\":\"\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>The aim of this research was to evaluate the effectiveness of the Silicoater MD System for bonding resin to four different Brazilian alloys. The alloys included the following proprietary materials: Duracast, Durabond II, Palad and Premium. Biobond II, a popular nickel-chromium alloy has been used as control. Dentacolor served as the veneering agent. All specimens were thermo-cycled for 24 hours between 41 degrees and 131 degrees C at a dwell time of one minute per temperature. Shear-bond strengths ranged from 1667 to 2842 psi. Scanning electron microscopic evaluation demonstrated no gap formations at the resin/metal interface for all of the aforementioned systems, the Silicoater MD System demonstrated acceptable retention efficiency in five types of metallic alloys.</p>\",\"PeriodicalId\":79504,\"journal\":{\"name\":\"Journal of dental technology : the peer-reviewed publication of the National Association of Dental Laboratories\",\"volume\":\"16 3\",\"pages\":\"11-4\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1999-04-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of dental technology : the peer-reviewed publication of the National Association of Dental Laboratories\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of dental technology : the peer-reviewed publication of the National Association of Dental Laboratories","FirstCategoryId":"1085","ListUrlMain":"","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
摘要
本研究的目的是评估硅水MD系统粘合树脂到四种不同的巴西合金的有效性。合金包括以下专有材料:Duracast, Durabond II, Palad和Premium。一种流行的镍铬合金Biobond II被用作对照。Dentacolor作为贴面剂。所有样品在41°C至131°C之间热循环24小时，每个温度停留1分钟。剪切粘接强度范围为1667至2842 psi。扫描电镜评价表明，上述所有体系在树脂/金属界面均未形成间隙，硅水MD体系在五种金属合金中表现出可接受的保留效率。
Resin bonding to various alloys by means of the Silicoater MD System.
The aim of this research was to evaluate the effectiveness of the Silicoater MD System for bonding resin to four different Brazilian alloys. The alloys included the following proprietary materials: Duracast, Durabond II, Palad and Premium. Biobond II, a popular nickel-chromium alloy has been used as control. Dentacolor served as the veneering agent. All specimens were thermo-cycled for 24 hours between 41 degrees and 131 degrees C at a dwell time of one minute per temperature. Shear-bond strengths ranged from 1667 to 2842 psi. Scanning electron microscopic evaluation demonstrated no gap formations at the resin/metal interface for all of the aforementioned systems, the Silicoater MD System demonstrated acceptable retention efficiency in five types of metallic alloys.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
