在脱盐膜的聚酰胺活性层中稳定地掺入氨基功能化磷酸银纳米粒子以增强防污性能

IF 6.8 3区 材料科学 Q1 MATERIALS SCIENCE, MULTIDISCIPLINARY
Abdul Waheed , Umair Baig , Fahad Ayesh Alharthi , Mohammad Azam Ansari , Abdulrahman Abdullah Abutaleb , Isam H. Aljundi
{"title":"在脱盐膜的聚酰胺活性层中稳定地掺入氨基功能化磷酸银纳米粒子以增强防污性能","authors":"Abdul Waheed ,&nbsp;Umair Baig ,&nbsp;Fahad Ayesh Alharthi ,&nbsp;Mohammad Azam Ansari ,&nbsp;Abdulrahman Abdullah Abutaleb ,&nbsp;Isam H. Aljundi","doi":"10.1016/j.jsamd.2025.100916","DOIUrl":null,"url":null,"abstract":"<div><div>Various nanoparticles (NPs) have been incorporated into the membrane's active layer. Still, the success of such a decoration depends on the nano-size and homogeneity of the dispersion to be used during interfacial polymerization (IP). The current study aimed to achieve a stable and uniform incorporation of the silver phosphate (AgP) NPs in the membrane's active layer to develop efficient desalination and antifouling properties. Hence, this work was focused on obtaining nano-sized silver phosphate and then purposely decorating the amine (-NH<sub>2</sub>) functional groups on the AgP NPs, resulting in F–AgP. These features resulted in a uniform and homogeneous dispersion of the F–AgP NPs in the aqueous phase used for IP. The aqueous phase contained diethylenetriamine (DETA, 3A) as an amine, containing 0.05% wt/v of the F–AgP NPs. The obtained aqueous solution gave a uniform incorporation of the F–AgP NPs in the polyamide active layer upon IP reaction with acid chloride in the organic phase. Two organic phases were used: terephthaloyl chloride (TPC) and trimesoyl chloride (TMC) to obtain F–AgP-3A/TPC and F–AgP-3A/TMC membranes. The obtained membranes showed promising desalination performance, where F–AgP-3A/TPC membranes showed Na<sub>2</sub>SO<sub>4</sub> and CaCl<sub>2</sub> rejections of &gt;96%, whereas F–AgP-3A/TMC membrane had 83 and 75% rejections, respectively. The impact of feed temperature revealed a slight decline in Na<sub>2</sub>SO<sub>4</sub> rejection to 95.0% and an increase in permeate flux to 29.6 L m<sup>−2</sup> h<sup>−1</sup> at 35 <span><math><mrow><mo>°C</mo></mrow></math></span> in the case of F–AgP-3A/TPC. In addition, the stability tests also revealed a stable performance of the membranes in terms of permeate flux and salt rejection over 840 min. The BSA fouling studies showed that after an initial minor decrease in the normalized flux of the membranes, the rejection of Na<sub>2</sub>SO<sub>4</sub> remained stable at &gt;96%. Regarding anti-biofouling potentials, both membranes performed equally well, owing to AgP NPs in the active layer inhibiting &gt;99% growth of the gram-positive and negative bacterial colonies.</div></div>","PeriodicalId":17219,"journal":{"name":"Journal of Science: Advanced Materials and Devices","volume":"10 3","pages":"Article 100916"},"PeriodicalIF":6.8000,"publicationDate":"2025-05-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Stable incorporation of amino-functionalized silver phosphate nanoparticles in the polyamide active layer of desalination membranes for enhanced antifouling properties\",\"authors\":\"Abdul Waheed ,&nbsp;Umair Baig ,&nbsp;Fahad Ayesh Alharthi ,&nbsp;Mohammad Azam Ansari ,&nbsp;Abdulrahman Abdullah Abutaleb ,&nbsp;Isam H. Aljundi\",\"doi\":\"10.1016/j.jsamd.2025.100916\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Various nanoparticles (NPs) have been incorporated into the membrane's active layer. Still, the success of such a decoration depends on the nano-size and homogeneity of the dispersion to be used during interfacial polymerization (IP). The current study aimed to achieve a stable and uniform incorporation of the silver phosphate (AgP) NPs in the membrane's active layer to develop efficient desalination and antifouling properties. Hence, this work was focused on obtaining nano-sized silver phosphate and then purposely decorating the amine (-NH<sub>2</sub>) functional groups on the AgP NPs, resulting in F–AgP. These features resulted in a uniform and homogeneous dispersion of the F–AgP NPs in the aqueous phase used for IP. The aqueous phase contained diethylenetriamine (DETA, 3A) as an amine, containing 0.05% wt/v of the F–AgP NPs. The obtained aqueous solution gave a uniform incorporation of the F–AgP NPs in the polyamide active layer upon IP reaction with acid chloride in the organic phase. Two organic phases were used: terephthaloyl chloride (TPC) and trimesoyl chloride (TMC) to obtain F–AgP-3A/TPC and F–AgP-3A/TMC membranes. The obtained membranes showed promising desalination performance, where F–AgP-3A/TPC membranes showed Na<sub>2</sub>SO<sub>4</sub> and CaCl<sub>2</sub> rejections of &gt;96%, whereas F–AgP-3A/TMC membrane had 83 and 75% rejections, respectively. The impact of feed temperature revealed a slight decline in Na<sub>2</sub>SO<sub>4</sub> rejection to 95.0% and an increase in permeate flux to 29.6 L m<sup>−2</sup> h<sup>−1</sup> at 35 <span><math><mrow><mo>°C</mo></mrow></math></span> in the case of F–AgP-3A/TPC. In addition, the stability tests also revealed a stable performance of the membranes in terms of permeate flux and salt rejection over 840 min. The BSA fouling studies showed that after an initial minor decrease in the normalized flux of the membranes, the rejection of Na<sub>2</sub>SO<sub>4</sub> remained stable at &gt;96%. Regarding anti-biofouling potentials, both membranes performed equally well, owing to AgP NPs in the active layer inhibiting &gt;99% growth of the gram-positive and negative bacterial colonies.</div></div>\",\"PeriodicalId\":17219,\"journal\":{\"name\":\"Journal of Science: Advanced Materials and Devices\",\"volume\":\"10 3\",\"pages\":\"Article 100916\"},\"PeriodicalIF\":6.8000,\"publicationDate\":\"2025-05-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Science: Advanced Materials and Devices\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2468217925000693\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Science: Advanced Materials and Devices","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2468217925000693","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

各种纳米颗粒(NPs)已被纳入膜的活性层。尽管如此,这种装饰的成功取决于界面聚合(IP)中使用的分散体的纳米尺寸和均匀性。目前的研究旨在实现稳定和均匀地将磷酸银(AgP) NPs掺入膜的活性层,以开发有效的脱盐和防污性能。因此,本工作的重点是获得纳米级磷酸银,然后有目的地修饰AgP NPs上的胺(-NH2)官能团,从而得到F-AgP。这些特征导致了用于IP的F-AgP NPs在水相中的均匀分散。水相以二乙烯三胺(DETA, 3A)为胺,含有0.05% wt/v的F-AgP NPs。所得水溶液与有机相中的酸性氯离子发生IP反应,使F-AgP NPs均匀地掺入聚酰胺活性层。采用对苯二甲酰氯(TPC)和三甲基氯(TMC)两种有机相制备F-AgP-3A /TPC和F-AgP-3A /TMC膜。所得膜具有良好的脱盐性能,其中F-AgP-3A /TPC膜对Na2SO4和CaCl2的去除率为96%,而F-AgP-3A /TMC膜的去除率分别为83%和75%。在进料温度的影响下,F-AgP-3A /TPC在35℃时的Na2SO4截留率略微下降至95.0%,渗透通量增加至29.6 L m−2 h−1。此外,稳定性测试还表明,在840 min内,膜的渗透通量和盐截留性能稳定。BSA污染研究表明,在初始归一化通量略有下降后,膜的Na2SO4截留率稳定在96%。由于活性层中的AgP NPs抑制了革兰氏阳性和阴性细菌菌落99%的生长,因此两种膜的抗生物结垢性能同样良好。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Stable incorporation of amino-functionalized silver phosphate nanoparticles in the polyamide active layer of desalination membranes for enhanced antifouling properties
Various nanoparticles (NPs) have been incorporated into the membrane's active layer. Still, the success of such a decoration depends on the nano-size and homogeneity of the dispersion to be used during interfacial polymerization (IP). The current study aimed to achieve a stable and uniform incorporation of the silver phosphate (AgP) NPs in the membrane's active layer to develop efficient desalination and antifouling properties. Hence, this work was focused on obtaining nano-sized silver phosphate and then purposely decorating the amine (-NH2) functional groups on the AgP NPs, resulting in F–AgP. These features resulted in a uniform and homogeneous dispersion of the F–AgP NPs in the aqueous phase used for IP. The aqueous phase contained diethylenetriamine (DETA, 3A) as an amine, containing 0.05% wt/v of the F–AgP NPs. The obtained aqueous solution gave a uniform incorporation of the F–AgP NPs in the polyamide active layer upon IP reaction with acid chloride in the organic phase. Two organic phases were used: terephthaloyl chloride (TPC) and trimesoyl chloride (TMC) to obtain F–AgP-3A/TPC and F–AgP-3A/TMC membranes. The obtained membranes showed promising desalination performance, where F–AgP-3A/TPC membranes showed Na2SO4 and CaCl2 rejections of >96%, whereas F–AgP-3A/TMC membrane had 83 and 75% rejections, respectively. The impact of feed temperature revealed a slight decline in Na2SO4 rejection to 95.0% and an increase in permeate flux to 29.6 L m−2 h−1 at 35 °C in the case of F–AgP-3A/TPC. In addition, the stability tests also revealed a stable performance of the membranes in terms of permeate flux and salt rejection over 840 min. The BSA fouling studies showed that after an initial minor decrease in the normalized flux of the membranes, the rejection of Na2SO4 remained stable at >96%. Regarding anti-biofouling potentials, both membranes performed equally well, owing to AgP NPs in the active layer inhibiting >99% growth of the gram-positive and negative bacterial colonies.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Science: Advanced Materials and Devices
Journal of Science: Advanced Materials and Devices Materials Science-Electronic, Optical and Magnetic Materials
CiteScore
11.90
自引率
2.50%
发文量
88
审稿时长
47 days
期刊介绍: In 1985, the Journal of Science was founded as a platform for publishing national and international research papers across various disciplines, including natural sciences, technology, social sciences, and humanities. Over the years, the journal has experienced remarkable growth in terms of quality, size, and scope. Today, it encompasses a diverse range of publications dedicated to academic research. Considering the rapid expansion of materials science, we are pleased to introduce the Journal of Science: Advanced Materials and Devices. This new addition to our journal series offers researchers an exciting opportunity to publish their work on all aspects of materials science and technology within the esteemed Journal of Science. With this development, we aim to revolutionize the way research in materials science is expressed and organized, further strengthening our commitment to promoting outstanding research across various scientific and technological fields.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信