环氧界面力学中石英压头形状和深度影响的分子动力学研究

IF 3.6 2区 工程技术 Q2 ENGINEERING, GEOLOGICAL
Pengchang Wei, Zhen‐Yu Yin, Pierre‐Yves Hicher, Yuanyuan Zheng
{"title":"环氧界面力学中石英压头形状和深度影响的分子动力学研究","authors":"Pengchang Wei, Zhen‐Yu Yin, Pierre‐Yves Hicher, Yuanyuan Zheng","doi":"10.1002/nag.4021","DOIUrl":null,"url":null,"abstract":"The interfacial mechanical behavior between epoxy and quartz at the microscale remains inadequately understood. The quartz‐indenter shape and indentation depth (<jats:italic>h</jats:italic><jats:sub>c</jats:sub>) effect on epoxy interfacial mechanical behavior has been investigated through molecular dynamics (MD) simulation of nanoindentation and nanoscratching. This work employs two Vickers‐type and four spherical indenters with varying radii (<jats:italic>R</jats:italic>) under different <jats:italic>h</jats:italic><jats:sub>c</jats:sub> conditions, revealing the fundamental deformation mechanisms at the microscale. The reduced modulus and Young's modulus of epoxy resin obtained from MD simulations align well with experimental results. Key findings include: (1) during MD nanoindentation, the elastic‐plastic deformation of epoxy and the indentation force increased with rising <jats:italic>R</jats:italic> and <jats:italic>h</jats:italic><jats:sub>c</jats:sub>, due to the enhanced interfacial interactions between epoxy and quartz. (2) A negative indentation force was observed during the unloading stage, attributed to adhesion effects. (3) In MD nanoscratching, the forces in the <jats:italic>y</jats:italic>‐ and <jats:italic>z</jats:italic>‐directions increased with rising <jats:italic>R</jats:italic> and <jats:italic>h</jats:italic><jats:sub>c</jats:sub>, which was due to a greater contact zone and elastic–plastic deformation. (4) The friction coefficient could increase with rising indentation depth, exceeding 1.0 at <jats:italic>h</jats:italic><jats:sub>c</jats:sub>/<jats:italic>R</jats:italic> &gt; 0.75. (5) The classic Coulomb's law of friction was not applicable at the microscale or nanoscale. These results provide a foundation for developing interfacial models at the macroscopic scale for engineering applications.","PeriodicalId":13786,"journal":{"name":"International Journal for Numerical and Analytical Methods in Geomechanics","volume":"604 1","pages":""},"PeriodicalIF":3.6000,"publicationDate":"2025-06-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Molecular Dynamics Study on Quartz‐Indenter Shape and Depth Effects in Epoxy Interfacial Mechanics\",\"authors\":\"Pengchang Wei, Zhen‐Yu Yin, Pierre‐Yves Hicher, Yuanyuan Zheng\",\"doi\":\"10.1002/nag.4021\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The interfacial mechanical behavior between epoxy and quartz at the microscale remains inadequately understood. The quartz‐indenter shape and indentation depth (<jats:italic>h</jats:italic><jats:sub>c</jats:sub>) effect on epoxy interfacial mechanical behavior has been investigated through molecular dynamics (MD) simulation of nanoindentation and nanoscratching. This work employs two Vickers‐type and four spherical indenters with varying radii (<jats:italic>R</jats:italic>) under different <jats:italic>h</jats:italic><jats:sub>c</jats:sub> conditions, revealing the fundamental deformation mechanisms at the microscale. The reduced modulus and Young's modulus of epoxy resin obtained from MD simulations align well with experimental results. Key findings include: (1) during MD nanoindentation, the elastic‐plastic deformation of epoxy and the indentation force increased with rising <jats:italic>R</jats:italic> and <jats:italic>h</jats:italic><jats:sub>c</jats:sub>, due to the enhanced interfacial interactions between epoxy and quartz. (2) A negative indentation force was observed during the unloading stage, attributed to adhesion effects. (3) In MD nanoscratching, the forces in the <jats:italic>y</jats:italic>‐ and <jats:italic>z</jats:italic>‐directions increased with rising <jats:italic>R</jats:italic> and <jats:italic>h</jats:italic><jats:sub>c</jats:sub>, which was due to a greater contact zone and elastic–plastic deformation. (4) The friction coefficient could increase with rising indentation depth, exceeding 1.0 at <jats:italic>h</jats:italic><jats:sub>c</jats:sub>/<jats:italic>R</jats:italic> &gt; 0.75. (5) The classic Coulomb's law of friction was not applicable at the microscale or nanoscale. These results provide a foundation for developing interfacial models at the macroscopic scale for engineering applications.\",\"PeriodicalId\":13786,\"journal\":{\"name\":\"International Journal for Numerical and Analytical Methods in Geomechanics\",\"volume\":\"604 1\",\"pages\":\"\"},\"PeriodicalIF\":3.6000,\"publicationDate\":\"2025-06-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal for Numerical and Analytical Methods in Geomechanics\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1002/nag.4021\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, GEOLOGICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal for Numerical and Analytical Methods in Geomechanics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1002/nag.4021","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, GEOLOGICAL","Score":null,"Total":0}
引用次数: 0

摘要

在微观尺度上,环氧树脂与石英之间的界面力学行为尚不清楚。通过分子动力学(MD)模拟纳米压痕和纳米划痕,研究了石英压痕形状和压痕深度(hc)对环氧树脂界面力学行为的影响。这项工作采用了两个维氏型和四个不同半径(R)的球形压头,在不同的hc条件下,揭示了微观尺度下的基本变形机制。MD模拟得到的环氧树脂的还原模量和杨氏模量与实验结果吻合较好。主要发现包括:(1)在MD纳米压痕过程中,环氧树脂的弹塑性变形和压痕力随着R和hc的升高而增大,这是由于环氧树脂与石英之间的界面相互作用增强所致。(2)在卸载阶段,由于粘附效应,观察到负压痕力。(3)在MD纳米划痕中,随着R和hc的增加,y -和z -方向上的力增加,这是由于接触区和弹塑性变形的增加。(4)摩擦系数随压痕深度的增加而增大,在hc/R >时超过1.0;0.75. (5)经典的库仑摩擦定律在微观尺度和纳米尺度上都不适用。这些结果为在宏观尺度上建立工程应用的界面模型提供了基础。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Molecular Dynamics Study on Quartz‐Indenter Shape and Depth Effects in Epoxy Interfacial Mechanics
The interfacial mechanical behavior between epoxy and quartz at the microscale remains inadequately understood. The quartz‐indenter shape and indentation depth (hc) effect on epoxy interfacial mechanical behavior has been investigated through molecular dynamics (MD) simulation of nanoindentation and nanoscratching. This work employs two Vickers‐type and four spherical indenters with varying radii (R) under different hc conditions, revealing the fundamental deformation mechanisms at the microscale. The reduced modulus and Young's modulus of epoxy resin obtained from MD simulations align well with experimental results. Key findings include: (1) during MD nanoindentation, the elastic‐plastic deformation of epoxy and the indentation force increased with rising R and hc, due to the enhanced interfacial interactions between epoxy and quartz. (2) A negative indentation force was observed during the unloading stage, attributed to adhesion effects. (3) In MD nanoscratching, the forces in the y‐ and z‐directions increased with rising R and hc, which was due to a greater contact zone and elastic–plastic deformation. (4) The friction coefficient could increase with rising indentation depth, exceeding 1.0 at hc/R > 0.75. (5) The classic Coulomb's law of friction was not applicable at the microscale or nanoscale. These results provide a foundation for developing interfacial models at the macroscopic scale for engineering applications.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
6.40
自引率
12.50%
发文量
160
审稿时长
9 months
期刊介绍: The journal welcomes manuscripts that substantially contribute to the understanding of the complex mechanical behaviour of geomaterials (soils, rocks, concrete, ice, snow, and powders), through innovative experimental techniques, and/or through the development of novel numerical or hybrid experimental/numerical modelling concepts in geomechanics. Topics of interest include instabilities and localization, interface and surface phenomena, fracture and failure, multi-physics and other time-dependent phenomena, micromechanics and multi-scale methods, and inverse analysis and stochastic methods. Papers related to energy and environmental issues are particularly welcome. The illustration of the proposed methods and techniques to engineering problems is encouraged. However, manuscripts dealing with applications of existing methods, or proposing incremental improvements to existing methods – in particular marginal extensions of existing analytical solutions or numerical methods – will not be considered for review.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信