Daniel Deuter, Amer Haj, Alexander Brawanski, Lars Krenkel, Nils-Ole Schmidt, Christian Doenitz
{"title":"颅内动脉瘤血流动力学快速模拟的临床应用","authors":"Daniel Deuter, Amer Haj, Alexander Brawanski, Lars Krenkel, Nils-Ole Schmidt, Christian Doenitz","doi":"10.1007/s00701-025-06469-9","DOIUrl":null,"url":null,"abstract":"<div><h3>Background</h3><p>A widely accepted tool to assess hemodynamics, one of the most important factors in aneurysm pathophysiology, is Computational Fluid Dynamics (CFD). As current workflows are still time consuming and difficult to operate, CFD is not yet a standard tool in the clinical setting. There it could provide valuable information on aneurysm treatment, especially regarding local risks of rupture, which might help to optimize the individualized strategy of neurosurgical dissection during microsurgical aneurysm clipping.</p><h3>Method</h3><p>We established and validated a semi-automated workflow using 3D rotational angiographies of 24 intracranial aneurysms from patients having received aneurysm treatment at our centre. Reconstruction of vessel geometry and generation of volume meshes was performed using AMIRA 6.2.0 and ICEM 17.1. For solving ANSYS CFX was used. For validational checks, tests regarding the volumetric impact of smoothing operations, the impact of mesh sizes on the results (grid convergence), geometric mesh quality and time tests for the time needed to perform the workflow were conducted in subgroups.</p><h3>Results</h3><p>Most of the steps of the workflow were performed directly on the 3D images requiring no programming experience. The workflow led to final CFD results in a mean time of 22 min 51.4 s (95%-CI 20 min 51.562 s–24 min 51.238 s, <i>n</i> = 5). Volume of the geometries after pre-processing was in mean 4.46% higher than before in the analysed subgroup (95%-CI 3.43–5.50%). Regarding mesh sizes, mean relative aberrations of 2.30% (95%-CI 1.51–3.09%) were found for surface meshes and between 1.40% (95%-CI 1.07–1.72%) and 2.61% (95%-CI 1.93–3.29%) for volume meshes. Acceptable geometric mesh quality of volume meshes was found.</p><h3>Conclusions</h3><p>We developed a semi-automated workflow for aneurysm CFD to benefit from hemodynamic data in the clinical setting. The ease of handling opens the workflow to clinicians untrained in programming. As previous studies have found that the distribution of hemodynamic parameters correlates with thin-walled aneurysm areas susceptible to rupture, these data might be beneficial for the operating neurosurgeon during aneurysm surgery, even in acute cases.</p></div>","PeriodicalId":7370,"journal":{"name":"Acta Neurochirurgica","volume":"167 1","pages":""},"PeriodicalIF":1.9000,"publicationDate":"2025-03-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1007/s00701-025-06469-9.pdf","citationCount":"0","resultStr":"{\"title\":\"Fast simulation of hemodynamics in intracranial aneurysms for clinical use\",\"authors\":\"Daniel Deuter, Amer Haj, Alexander Brawanski, Lars Krenkel, Nils-Ole Schmidt, Christian Doenitz\",\"doi\":\"10.1007/s00701-025-06469-9\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><h3>Background</h3><p>A widely accepted tool to assess hemodynamics, one of the most important factors in aneurysm pathophysiology, is Computational Fluid Dynamics (CFD). As current workflows are still time consuming and difficult to operate, CFD is not yet a standard tool in the clinical setting. There it could provide valuable information on aneurysm treatment, especially regarding local risks of rupture, which might help to optimize the individualized strategy of neurosurgical dissection during microsurgical aneurysm clipping.</p><h3>Method</h3><p>We established and validated a semi-automated workflow using 3D rotational angiographies of 24 intracranial aneurysms from patients having received aneurysm treatment at our centre. Reconstruction of vessel geometry and generation of volume meshes was performed using AMIRA 6.2.0 and ICEM 17.1. For solving ANSYS CFX was used. For validational checks, tests regarding the volumetric impact of smoothing operations, the impact of mesh sizes on the results (grid convergence), geometric mesh quality and time tests for the time needed to perform the workflow were conducted in subgroups.</p><h3>Results</h3><p>Most of the steps of the workflow were performed directly on the 3D images requiring no programming experience. The workflow led to final CFD results in a mean time of 22 min 51.4 s (95%-CI 20 min 51.562 s–24 min 51.238 s, <i>n</i> = 5). Volume of the geometries after pre-processing was in mean 4.46% higher than before in the analysed subgroup (95%-CI 3.43–5.50%). Regarding mesh sizes, mean relative aberrations of 2.30% (95%-CI 1.51–3.09%) were found for surface meshes and between 1.40% (95%-CI 1.07–1.72%) and 2.61% (95%-CI 1.93–3.29%) for volume meshes. Acceptable geometric mesh quality of volume meshes was found.</p><h3>Conclusions</h3><p>We developed a semi-automated workflow for aneurysm CFD to benefit from hemodynamic data in the clinical setting. The ease of handling opens the workflow to clinicians untrained in programming. As previous studies have found that the distribution of hemodynamic parameters correlates with thin-walled aneurysm areas susceptible to rupture, these data might be beneficial for the operating neurosurgeon during aneurysm surgery, even in acute cases.</p></div>\",\"PeriodicalId\":7370,\"journal\":{\"name\":\"Acta Neurochirurgica\",\"volume\":\"167 1\",\"pages\":\"\"},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2025-03-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1007/s00701-025-06469-9.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Acta Neurochirurgica\",\"FirstCategoryId\":\"3\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s00701-025-06469-9\",\"RegionNum\":3,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CLINICAL NEUROLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Acta Neurochirurgica","FirstCategoryId":"3","ListUrlMain":"https://link.springer.com/article/10.1007/s00701-025-06469-9","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CLINICAL NEUROLOGY","Score":null,"Total":0}
引用次数: 0
摘要
血流动力学是动脉瘤病理生理中最重要的因素之一,计算流体动力学(CFD)是目前广泛接受的评估血流动力学的工具。由于目前的工作流程仍然耗时且难以操作,CFD尚未成为临床环境中的标准工具。它可以为动脉瘤治疗提供有价值的信息,特别是关于局部破裂的风险,这可能有助于优化显微手术动脉瘤夹术中神经外科解剖的个体化策略。方法我们建立并验证了一种半自动化的工作流程,使用3D旋转血管造影对24例在我们中心接受动脉瘤治疗的患者进行颅内动脉瘤检查。使用AMIRA 6.2.0和ICEM 17.1进行血管几何重建和体网格生成。采用ANSYS CFX进行求解。为了进行验证性检查,对平滑操作的体积影响、网格大小对结果的影响(网格收敛)、几何网格质量和执行工作流所需时间的时间进行了子组测试。结果工作流的大部分步骤直接在3D图像上执行,无需编程经验。该工作流程得出最终CFD结果的平均时间为22 min 51.4 s (95% ci 20 min 51.562 s - 24 min 51.238 s, n = 5)。在分析亚组中,预处理后的几何形状体积平均比预处理前高4.46% (95%-CI 3.43-5.50%)。对于网格大小,表面网格的平均相对像差为2.30% (95%-CI 1.51-3.09%),体积网格的平均相对像差在1.40% (95%-CI 1.07-1.72%)和2.61% (95%-CI 1.93-3.29%)之间。找到了可接受的体网格几何网格质量。我们开发了一种半自动化的动脉瘤CFD工作流程,以受益于临床环境中的血流动力学数据。易于处理打开了工作流程的临床医生未经培训的编程。由于先前的研究发现血流动力学参数的分布与薄壁动脉瘤易破裂的区域相关,这些数据可能对动脉瘤手术中的神经外科医生有益,即使是在急性病例中。
Fast simulation of hemodynamics in intracranial aneurysms for clinical use
Background
A widely accepted tool to assess hemodynamics, one of the most important factors in aneurysm pathophysiology, is Computational Fluid Dynamics (CFD). As current workflows are still time consuming and difficult to operate, CFD is not yet a standard tool in the clinical setting. There it could provide valuable information on aneurysm treatment, especially regarding local risks of rupture, which might help to optimize the individualized strategy of neurosurgical dissection during microsurgical aneurysm clipping.
Method
We established and validated a semi-automated workflow using 3D rotational angiographies of 24 intracranial aneurysms from patients having received aneurysm treatment at our centre. Reconstruction of vessel geometry and generation of volume meshes was performed using AMIRA 6.2.0 and ICEM 17.1. For solving ANSYS CFX was used. For validational checks, tests regarding the volumetric impact of smoothing operations, the impact of mesh sizes on the results (grid convergence), geometric mesh quality and time tests for the time needed to perform the workflow were conducted in subgroups.
Results
Most of the steps of the workflow were performed directly on the 3D images requiring no programming experience. The workflow led to final CFD results in a mean time of 22 min 51.4 s (95%-CI 20 min 51.562 s–24 min 51.238 s, n = 5). Volume of the geometries after pre-processing was in mean 4.46% higher than before in the analysed subgroup (95%-CI 3.43–5.50%). Regarding mesh sizes, mean relative aberrations of 2.30% (95%-CI 1.51–3.09%) were found for surface meshes and between 1.40% (95%-CI 1.07–1.72%) and 2.61% (95%-CI 1.93–3.29%) for volume meshes. Acceptable geometric mesh quality of volume meshes was found.
Conclusions
We developed a semi-automated workflow for aneurysm CFD to benefit from hemodynamic data in the clinical setting. The ease of handling opens the workflow to clinicians untrained in programming. As previous studies have found that the distribution of hemodynamic parameters correlates with thin-walled aneurysm areas susceptible to rupture, these data might be beneficial for the operating neurosurgeon during aneurysm surgery, even in acute cases.
期刊介绍:
The journal "Acta Neurochirurgica" publishes only original papers useful both to research and clinical work. Papers should deal with clinical neurosurgery - diagnosis and diagnostic techniques, operative surgery and results, postoperative treatment - or with research work in neuroscience if the underlying questions or the results are of neurosurgical interest. Reports on congresses are given in brief accounts. As official organ of the European Association of Neurosurgical Societies the journal publishes all announcements of the E.A.N.S. and reports on the activities of its member societies. Only contributions written in English will be accepted.