{"title":"ct导航、大股骨头和双活动衬垫对全髋关节置换术中实现所需活动范围的影响。","authors":"Toshiki Konishi, Satoshi Hamai, Shinya Kawahara, Daisuke Hara, Taishi Sato, Goro Motomura, Takeshi Utsunomiya, Yasuharu Nakashima","doi":"10.1302/2633-1462.62.BJO-2024-0084.R1","DOIUrl":null,"url":null,"abstract":"<p><strong>Aims: </strong>This study aimed to investigate whether the use of CT-based navigation enhances: 1) the accuracy of cup placement; and 2) the achievement rate of required range of motion (ROM). Additionally, we investigated the impact of using a large femoral head and dual-mobility liner on the achievement rates.</p><p><strong>Methods: </strong>This retrospective study analyzed 60 manual and 51 CT-based navigated primary total hip arthroplasties performed at a single facility. Postoperative CT scans and CT-based simulation software were employed to measure the cup orientation and to simulate the ROM. We compared the absolute errors for radiological inclination (RI) and radiological anteversion (RA) between the two groups. We also examined whether the simulated ROM met the required ROM criteria, defined as flexion > 110°, internal rotation > 30°, extension > 30°, and external rotation > 30°. Furthermore, we performed simulations with 36 mm femoral head and dual-mobility liner.</p><p><strong>Results: </strong>The absolute errors of RI and RA from the preoperative plan were significantly smaller in the CT-based navigation group (3.7° (SD 3.5°) vs 5.1° (SD 3.5°); p = 0.022, and 3.9° (SD 3.5°) vs 6.8° (SD 5.0°); p = 0.001, respectively). The proportion of cases achieving the required ROM in all directions was significantly higher in the CT-based navigation group (42% vs 63%; p = 0.036). The achievement rates of the required ROM were significantly higher with the use of a 36 mm ball or dual-mobility liner compared to the use of a 32 mm ball (65% vs 51%; p = 0.040 and 77% vs 51%; p ≤ 0.001, respectively).</p><p><strong>Conclusion: </strong>CT-based navigation enhanced required ROM achievement rates by > 20%, regardless of the ball diameter. The improved accuracy of cup placement through CT-based navigation likely contributed to the enhancement. Furthermore, the use of large femoral heads and dual-mobility liners also improved the required ROM achievement rates. In cases with a high risk of dislocation, use of these devices is preferred.</p>","PeriodicalId":34103,"journal":{"name":"Bone & Joint Open","volume":"6 2","pages":"155-163"},"PeriodicalIF":2.8000,"publicationDate":"2025-02-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11805587/pdf/","citationCount":"0","resultStr":"{\"title\":\"Impact of CT-based navigation, large femoral head, and dual-mobility liner on achieving the required range of motion in total hip arthroplasty.\",\"authors\":\"Toshiki Konishi, Satoshi Hamai, Shinya Kawahara, Daisuke Hara, Taishi Sato, Goro Motomura, Takeshi Utsunomiya, Yasuharu Nakashima\",\"doi\":\"10.1302/2633-1462.62.BJO-2024-0084.R1\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><strong>Aims: </strong>This study aimed to investigate whether the use of CT-based navigation enhances: 1) the accuracy of cup placement; and 2) the achievement rate of required range of motion (ROM). Additionally, we investigated the impact of using a large femoral head and dual-mobility liner on the achievement rates.</p><p><strong>Methods: </strong>This retrospective study analyzed 60 manual and 51 CT-based navigated primary total hip arthroplasties performed at a single facility. Postoperative CT scans and CT-based simulation software were employed to measure the cup orientation and to simulate the ROM. We compared the absolute errors for radiological inclination (RI) and radiological anteversion (RA) between the two groups. We also examined whether the simulated ROM met the required ROM criteria, defined as flexion > 110°, internal rotation > 30°, extension > 30°, and external rotation > 30°. Furthermore, we performed simulations with 36 mm femoral head and dual-mobility liner.</p><p><strong>Results: </strong>The absolute errors of RI and RA from the preoperative plan were significantly smaller in the CT-based navigation group (3.7° (SD 3.5°) vs 5.1° (SD 3.5°); p = 0.022, and 3.9° (SD 3.5°) vs 6.8° (SD 5.0°); p = 0.001, respectively). The proportion of cases achieving the required ROM in all directions was significantly higher in the CT-based navigation group (42% vs 63%; p = 0.036). The achievement rates of the required ROM were significantly higher with the use of a 36 mm ball or dual-mobility liner compared to the use of a 32 mm ball (65% vs 51%; p = 0.040 and 77% vs 51%; p ≤ 0.001, respectively).</p><p><strong>Conclusion: </strong>CT-based navigation enhanced required ROM achievement rates by > 20%, regardless of the ball diameter. The improved accuracy of cup placement through CT-based navigation likely contributed to the enhancement. Furthermore, the use of large femoral heads and dual-mobility liners also improved the required ROM achievement rates. In cases with a high risk of dislocation, use of these devices is preferred.</p>\",\"PeriodicalId\":34103,\"journal\":{\"name\":\"Bone & Joint Open\",\"volume\":\"6 2\",\"pages\":\"155-163\"},\"PeriodicalIF\":2.8000,\"publicationDate\":\"2025-02-08\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11805587/pdf/\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Bone & Joint Open\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1302/2633-1462.62.BJO-2024-0084.R1\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ORTHOPEDICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bone & Joint Open","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1302/2633-1462.62.BJO-2024-0084.R1","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ORTHOPEDICS","Score":null,"Total":0}
引用次数: 0
摘要
目的:本研究旨在探讨基于ct的导航是否能提高:1)杯子放置的准确性;以及2)所需活动范围(ROM)的成活率。此外,我们还研究了使用大股骨头和双活动衬垫对成功率的影响。方法:本回顾性研究分析了60例手工和51例基于ct的导航全髋关节置换术。术后使用CT扫描和基于CT的模拟软件测量罩杯方向并模拟ROM。我们比较了两组间放射倾斜度(RI)和放射前倾度(RA)的绝对误差。我们还检查了模拟ROM是否满足所需的ROM标准,定义为屈曲>10°,内旋> 30°,外旋> 30°。此外,我们用36mm股骨头和双活动衬垫进行了模拟。结果:ct导航组RI和RA相对于术前计划的绝对误差明显较小(3.7°(SD 3.5°)vs 5.1°(SD 3.5°);p = 0.022, 3.9°(SD 3.5°)vs 6.8°(SD 5.0°);P = 0.001)。在基于ct的导航组中,在所有方向上达到所需ROM的病例比例明显更高(42% vs 63%;P = 0.036)。与使用32毫米球相比,使用36毫米球或双流动性衬管时,所需ROM的成成率明显更高(65% vs 51%;P = 0.040, 77% vs 51%;P分别≤0.001)。结论:无论球的直径如何,基于ct的导航可使所需的ROM成活率提高约20%。通过基于ct的导航提高杯子放置的准确性可能有助于增强。此外,使用大股骨头和双活动衬垫也提高了所需的ROM成活率。在脱位风险高的情况下,首选使用这些装置。
Impact of CT-based navigation, large femoral head, and dual-mobility liner on achieving the required range of motion in total hip arthroplasty.
Aims: This study aimed to investigate whether the use of CT-based navigation enhances: 1) the accuracy of cup placement; and 2) the achievement rate of required range of motion (ROM). Additionally, we investigated the impact of using a large femoral head and dual-mobility liner on the achievement rates.
Methods: This retrospective study analyzed 60 manual and 51 CT-based navigated primary total hip arthroplasties performed at a single facility. Postoperative CT scans and CT-based simulation software were employed to measure the cup orientation and to simulate the ROM. We compared the absolute errors for radiological inclination (RI) and radiological anteversion (RA) between the two groups. We also examined whether the simulated ROM met the required ROM criteria, defined as flexion > 110°, internal rotation > 30°, extension > 30°, and external rotation > 30°. Furthermore, we performed simulations with 36 mm femoral head and dual-mobility liner.
Results: The absolute errors of RI and RA from the preoperative plan were significantly smaller in the CT-based navigation group (3.7° (SD 3.5°) vs 5.1° (SD 3.5°); p = 0.022, and 3.9° (SD 3.5°) vs 6.8° (SD 5.0°); p = 0.001, respectively). The proportion of cases achieving the required ROM in all directions was significantly higher in the CT-based navigation group (42% vs 63%; p = 0.036). The achievement rates of the required ROM were significantly higher with the use of a 36 mm ball or dual-mobility liner compared to the use of a 32 mm ball (65% vs 51%; p = 0.040 and 77% vs 51%; p ≤ 0.001, respectively).
Conclusion: CT-based navigation enhanced required ROM achievement rates by > 20%, regardless of the ball diameter. The improved accuracy of cup placement through CT-based navigation likely contributed to the enhancement. Furthermore, the use of large femoral heads and dual-mobility liners also improved the required ROM achievement rates. In cases with a high risk of dislocation, use of these devices is preferred.