Numerical research on flow field structure and droplets distribution of kerosene-fueled rotating detonation ramjet engine

In order to reveal the multiphase flow field structure and fuel droplets distribution under rotating detonation ramjet engine fueled by liquid kerosene, non-premixed simulations coupled with an Euler-Lagrangian approach is adopted. Supersonic air is used as oxidizer and the total pressure and total temperature at the entrance of isolation are set as 1.2 MPa and 1100 K, respectively, with a Mach number of 1.9. It is shown that a single-wave is formed and typical rotating detonation wave structures are established under two different orifice spacing conditions, namely 2 mm and 6mm. A "rich oil and poor oxygen band" is formed and attributed to the inconsistent supply of fuel and air after the passage of the detonation wave. When the orifices spacing is increased from 2 mm to 6 mm, both obvious strips after the detonation wave and “n-type” deflagration structures near the contact surface are observed. Besides, the detonation wave front becomes discontinuous, as well as from the deflagration heat release distribution. Despite of the effect of the circumferential propagation of detonation wave, kerosene droplets still propagate mainly along the downstream direction. However, Kerosene droplets distribution shows obvious difference along the detonation wave propagation direction.