Tina Langkamp-Wedde, Dieter von Hörsten, Jens Karl Wegener
{"title":"使用杀菌剂控制墙壁上的爬虫和飞虫时的漂移","authors":"Tina Langkamp-Wedde, Dieter von Hörsten, Jens Karl Wegener","doi":"10.1186/s12302-024-00993-8","DOIUrl":null,"url":null,"abstract":"<div><h3>Background</h3><p>Insecticides are sprayed on external building walls for treatments against crawling and flying insects. These applications can lead to drift into non-target areas and thus to undesirable environmental pollution. This emission pathway needs to be considered during exposure assessments within product authorisations to assess potential environmental risks. However, now, there is only one default value for deposition that is used in all calculations based on the Emission Scenario Document of the Organization for Economic Co-operation and Development at a distance of 50 cm to the treatment area. This is not sufficient for a risk assessment.</p><h3>Results</h3><p>When applying a chemical barrier of 50 cm at the bottom of the building wall, wind direction had the greatest influence on drift, while changing the nozzle type had no significant effect. Compared with the measured ground sediments, the OECD default value was deemed to be realistic at a distance of 57 cm from the treatment area. When treating the entire building wall, the wind direction as well as the nozzle used show significant influence on the measured values of drift. The default value for deposition proposed for modelling environmental exposure in OECD document ESD PT18 No. 18 was exceeded. Thus, the exposure estimation might not be protective enough.</p><h3>Conclusion</h3><p>Drift values used for the environmental exposure assessment of biocidal products during treatments of building walls should be adapted. This is especially relevant for treatments of entire building walls, where the current default value was exceeded for all distances from the building wall. Wind direction and nozzle type can reduce environmental impact. This finding can be used as a measure to reduce unnecessary exposure in the environment in the future.</p></div>","PeriodicalId":546,"journal":{"name":"Environmental Sciences Europe","volume":"36 1","pages":""},"PeriodicalIF":6.0000,"publicationDate":"2024-09-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://link.springer.com/content/pdf/10.1186/s12302-024-00993-8.pdf","citationCount":"0","resultStr":"{\"title\":\"Drift when applying biocides to control crawling and flying insects on walls\",\"authors\":\"Tina Langkamp-Wedde, Dieter von Hörsten, Jens Karl Wegener\",\"doi\":\"10.1186/s12302-024-00993-8\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><h3>Background</h3><p>Insecticides are sprayed on external building walls for treatments against crawling and flying insects. These applications can lead to drift into non-target areas and thus to undesirable environmental pollution. This emission pathway needs to be considered during exposure assessments within product authorisations to assess potential environmental risks. However, now, there is only one default value for deposition that is used in all calculations based on the Emission Scenario Document of the Organization for Economic Co-operation and Development at a distance of 50 cm to the treatment area. This is not sufficient for a risk assessment.</p><h3>Results</h3><p>When applying a chemical barrier of 50 cm at the bottom of the building wall, wind direction had the greatest influence on drift, while changing the nozzle type had no significant effect. Compared with the measured ground sediments, the OECD default value was deemed to be realistic at a distance of 57 cm from the treatment area. When treating the entire building wall, the wind direction as well as the nozzle used show significant influence on the measured values of drift. The default value for deposition proposed for modelling environmental exposure in OECD document ESD PT18 No. 18 was exceeded. Thus, the exposure estimation might not be protective enough.</p><h3>Conclusion</h3><p>Drift values used for the environmental exposure assessment of biocidal products during treatments of building walls should be adapted. This is especially relevant for treatments of entire building walls, where the current default value was exceeded for all distances from the building wall. Wind direction and nozzle type can reduce environmental impact. This finding can be used as a measure to reduce unnecessary exposure in the environment in the future.</p></div>\",\"PeriodicalId\":546,\"journal\":{\"name\":\"Environmental Sciences Europe\",\"volume\":\"36 1\",\"pages\":\"\"},\"PeriodicalIF\":6.0000,\"publicationDate\":\"2024-09-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://link.springer.com/content/pdf/10.1186/s12302-024-00993-8.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Environmental Sciences Europe\",\"FirstCategoryId\":\"93\",\"ListUrlMain\":\"https://link.springer.com/article/10.1186/s12302-024-00993-8\",\"RegionNum\":3,\"RegionCategory\":\"环境科学与生态学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENVIRONMENTAL SCIENCES\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Environmental Sciences Europe","FirstCategoryId":"93","ListUrlMain":"https://link.springer.com/article/10.1186/s12302-024-00993-8","RegionNum":3,"RegionCategory":"环境科学与生态学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENVIRONMENTAL SCIENCES","Score":null,"Total":0}
Drift when applying biocides to control crawling and flying insects on walls
Background
Insecticides are sprayed on external building walls for treatments against crawling and flying insects. These applications can lead to drift into non-target areas and thus to undesirable environmental pollution. This emission pathway needs to be considered during exposure assessments within product authorisations to assess potential environmental risks. However, now, there is only one default value for deposition that is used in all calculations based on the Emission Scenario Document of the Organization for Economic Co-operation and Development at a distance of 50 cm to the treatment area. This is not sufficient for a risk assessment.
Results
When applying a chemical barrier of 50 cm at the bottom of the building wall, wind direction had the greatest influence on drift, while changing the nozzle type had no significant effect. Compared with the measured ground sediments, the OECD default value was deemed to be realistic at a distance of 57 cm from the treatment area. When treating the entire building wall, the wind direction as well as the nozzle used show significant influence on the measured values of drift. The default value for deposition proposed for modelling environmental exposure in OECD document ESD PT18 No. 18 was exceeded. Thus, the exposure estimation might not be protective enough.
Conclusion
Drift values used for the environmental exposure assessment of biocidal products during treatments of building walls should be adapted. This is especially relevant for treatments of entire building walls, where the current default value was exceeded for all distances from the building wall. Wind direction and nozzle type can reduce environmental impact. This finding can be used as a measure to reduce unnecessary exposure in the environment in the future.
期刊介绍:
ESEU is an international journal, focusing primarily on Europe, with a broad scope covering all aspects of environmental sciences, including the main topic regulation.
ESEU will discuss the entanglement between environmental sciences and regulation because, in recent years, there have been misunderstandings and even disagreement between stakeholders in these two areas. ESEU will help to improve the comprehension of issues between environmental sciences and regulation.
ESEU will be an outlet from the German-speaking (DACH) countries to Europe and an inlet from Europe to the DACH countries regarding environmental sciences and regulation.
Moreover, ESEU will facilitate the exchange of ideas and interaction between Europe and the DACH countries regarding environmental regulatory issues.
Although Europe is at the center of ESEU, the journal will not exclude the rest of the world, because regulatory issues pertaining to environmental sciences can be fully seen only from a global perspective.