Fabrication and characterization of novel biodegradable films based on tomato seed mucilage and gelatin plasticized with polyol mixtures

This research evaluates the potential of tomato seed mucilage (TSM) –gelatin (Ge) in producing edible films. Edible films were made using various ratios of TSM to Ge (1:0, 0.33:0.66, 0.66:0.33, and 0:1). Moreover, the effects of including three types of plasticizers, namely, glycerol (Gly), sorbitol (Sor), and polyethylene glycol (PEG) were investigated. The findings indicated that adding Ge did not affect the thickness of the films (p>0.05). However, it significantly increased the tensile strength (TS) and Young's modulus while reducing the elongation at break (EB) (p˂0.05). A higher TSM ratio significantly increased total color difference (ΔE) and yellowness index while decreasing film lightness and whiteness index (WI) (p˂0.05). The contact angle significantly decreased with the TSM ratio increases and Ge decreases (p˂0.05). Moreover, this led to higher opacity, solubility, moisture content, oxygen permeability, water vapor permeability (WVP), swelling, and moisture absorption (p˂0.05). Adding a plasticizer had no effect on the films' opacity, contact angle, and thickness. The Gly-containing film featured the highest EB, solubility, moisture content, swelling, WVP, oxygen permeability, and moisture absorption. The Sor-containing film had the highest TS. TSM concentration was directly correlated with increased film heterogeneity and surface roughness. X-ray diffraction peaks became sharper by increasing TSM concentration and including PEG, while Gly inclusion produced ordered broad peaks.