Xiaobin Su, Qiang Xu, Chenyu Yang, Xiaoyu Dai, Liejin Guo
{"title":"离心泵中气穴分布和增压恶化机制的数值研究","authors":"Xiaobin Su, Qiang Xu, Chenyu Yang, Xiaoyu Dai, Liejin Guo","doi":"10.1016/j.pnucene.2024.105443","DOIUrl":null,"url":null,"abstract":"<div><p>In the event of a loss-of-coolant accident at a nuclear power plant, a large amount of steam enters the main pump, causing the pump's pressurization to deteriorate or even fail. To reveal the deterioration mechanism of the pump performance, the gas-liquid distribution characteristics in the centrifugal pump were studied by using structured grids and the Eulerian-Eulerian model. Based on the dimensional analysis method, a predictive correlation for bubble size was established, which included factors such as inlet gas volume fraction (IGVF), rotational speed, liquid flow rate, and impeller geometric parameters. When the predictive correlation is applied to the numerical simulation, the numerical two-phase pressurization agrees well with that obtained from the experiment. As the IGVF increases, the gas begins to accumulate at the impeller inlet under the effect of the pressure gradient force. Due to the large increase in liquid velocity, the gas begins to accumulate from the middle of the diffuser flow channel. The area occupied by the gas pocket in the impeller loses its pressurization capability. The pressure vortex formed at the inlet of the channel causes the diffuser to lose its pressurization capacity. An increase in rotational speed and a decrease in liquid flow rate can effectively prevent the formation and development of gas pockets in the impeller.</p></div>","PeriodicalId":20617,"journal":{"name":"Progress in Nuclear Energy","volume":"177 ","pages":"Article 105443"},"PeriodicalIF":3.3000,"publicationDate":"2024-09-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Numerical study of gas pocket distribution and pressurization deterioration mechanism in a centrifugal pump\",\"authors\":\"Xiaobin Su, Qiang Xu, Chenyu Yang, Xiaoyu Dai, Liejin Guo\",\"doi\":\"10.1016/j.pnucene.2024.105443\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In the event of a loss-of-coolant accident at a nuclear power plant, a large amount of steam enters the main pump, causing the pump's pressurization to deteriorate or even fail. To reveal the deterioration mechanism of the pump performance, the gas-liquid distribution characteristics in the centrifugal pump were studied by using structured grids and the Eulerian-Eulerian model. Based on the dimensional analysis method, a predictive correlation for bubble size was established, which included factors such as inlet gas volume fraction (IGVF), rotational speed, liquid flow rate, and impeller geometric parameters. When the predictive correlation is applied to the numerical simulation, the numerical two-phase pressurization agrees well with that obtained from the experiment. As the IGVF increases, the gas begins to accumulate at the impeller inlet under the effect of the pressure gradient force. Due to the large increase in liquid velocity, the gas begins to accumulate from the middle of the diffuser flow channel. The area occupied by the gas pocket in the impeller loses its pressurization capability. The pressure vortex formed at the inlet of the channel causes the diffuser to lose its pressurization capacity. An increase in rotational speed and a decrease in liquid flow rate can effectively prevent the formation and development of gas pockets in the impeller.</p></div>\",\"PeriodicalId\":20617,\"journal\":{\"name\":\"Progress in Nuclear Energy\",\"volume\":\"177 \",\"pages\":\"Article 105443\"},\"PeriodicalIF\":3.3000,\"publicationDate\":\"2024-09-13\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Progress in Nuclear Energy\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0149197024003937\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"NUCLEAR SCIENCE & TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Progress in Nuclear Energy","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0149197024003937","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"NUCLEAR SCIENCE & TECHNOLOGY","Score":null,"Total":0}
Numerical study of gas pocket distribution and pressurization deterioration mechanism in a centrifugal pump
In the event of a loss-of-coolant accident at a nuclear power plant, a large amount of steam enters the main pump, causing the pump's pressurization to deteriorate or even fail. To reveal the deterioration mechanism of the pump performance, the gas-liquid distribution characteristics in the centrifugal pump were studied by using structured grids and the Eulerian-Eulerian model. Based on the dimensional analysis method, a predictive correlation for bubble size was established, which included factors such as inlet gas volume fraction (IGVF), rotational speed, liquid flow rate, and impeller geometric parameters. When the predictive correlation is applied to the numerical simulation, the numerical two-phase pressurization agrees well with that obtained from the experiment. As the IGVF increases, the gas begins to accumulate at the impeller inlet under the effect of the pressure gradient force. Due to the large increase in liquid velocity, the gas begins to accumulate from the middle of the diffuser flow channel. The area occupied by the gas pocket in the impeller loses its pressurization capability. The pressure vortex formed at the inlet of the channel causes the diffuser to lose its pressurization capacity. An increase in rotational speed and a decrease in liquid flow rate can effectively prevent the formation and development of gas pockets in the impeller.
期刊介绍:
Progress in Nuclear Energy is an international review journal covering all aspects of nuclear science and engineering. In keeping with the maturity of nuclear power, articles on safety, siting and environmental problems are encouraged, as are those associated with economics and fuel management. However, basic physics and engineering will remain an important aspect of the editorial policy. Articles published are either of a review nature or present new material in more depth. They are aimed at researchers and technically-oriented managers working in the nuclear energy field.
Please note the following:
1) PNE seeks high quality research papers which are medium to long in length. Short research papers should be submitted to the journal Annals in Nuclear Energy.
2) PNE reserves the right to reject papers which are based solely on routine application of computer codes used to produce reactor designs or explain existing reactor phenomena. Such papers, although worthy, are best left as laboratory reports whereas Progress in Nuclear Energy seeks papers of originality, which are archival in nature, in the fields of mathematical and experimental nuclear technology, including fission, fusion (blanket physics, radiation damage), safety, materials aspects, economics, etc.
3) Review papers, which may occasionally be invited, are particularly sought by the journal in these fields.