热变形和热处理过程中 GH4079 超合金的微观结构演变

IF 6.2 2区 材料科学 Q1 MATERIALS SCIENCE, MULTIDISCIPLINARY
{"title":"热变形和热处理过程中 GH4079 超合金的微观结构演变","authors":"","doi":"10.1016/j.jmrt.2024.09.030","DOIUrl":null,"url":null,"abstract":"<div><p>Through hot compression and subsequent heat treatment experiments on GH4079 superalloy, the influence of different hot deformation and heat treatment conditions on the evolution of GH4079 superalloy microstructure was studied. The evolution of grains and γ′ phases under different thermomechanical conditions was investigated. The results indicate that at deformation temperatures above 1100 °C and strain rates ranging from 0.01 to 0.1 s<sup>−1</sup>, the primary mechanism of dynamic softening in the alloy is discontinuous dynamic recrystallization (DDRX). When the deformation temperature is below 1100 °C and strain rates range from 0.01 to 0.1 s<sup>−1</sup>, both continuous dynamic recrystallization (CDRX) and DDRX are the main dynamic softening mechanisms. Due to high strain energy accumulation, the samples deformed at lower temperatures (below 1100 °C) and then solution-treated at 1120 °C for 8 h exhibit significant increases in recrystallization volume fraction and recrystallization grain size. Conversely, the samples deformed at higher temperatures (above 1100 °C) and then solution-treated at 1120 °C for 8 h show minimal changes in recrystallization volume fraction and recrystallization grain size. After solution treatment at 1140 °C, the grain size of the alloy significantly increases. The samples deformed at higher strain rates exhibit the evolution of fine γ′ phases into elongated rod shapes during solution treatment, while larger γ′ phases undergo splitting processes.</p></div>","PeriodicalId":54332,"journal":{"name":"Journal of Materials Research and Technology-Jmr&t","volume":null,"pages":null},"PeriodicalIF":6.2000,"publicationDate":"2024-09-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2238785424020313/pdfft?md5=46f4a24c0ccabe4b2d5c25c71c6c0403&pid=1-s2.0-S2238785424020313-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Microstructural evolution of GH4079 superalloy during hot deformation and heat treatment\",\"authors\":\"\",\"doi\":\"10.1016/j.jmrt.2024.09.030\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Through hot compression and subsequent heat treatment experiments on GH4079 superalloy, the influence of different hot deformation and heat treatment conditions on the evolution of GH4079 superalloy microstructure was studied. The evolution of grains and γ′ phases under different thermomechanical conditions was investigated. The results indicate that at deformation temperatures above 1100 °C and strain rates ranging from 0.01 to 0.1 s<sup>−1</sup>, the primary mechanism of dynamic softening in the alloy is discontinuous dynamic recrystallization (DDRX). When the deformation temperature is below 1100 °C and strain rates range from 0.01 to 0.1 s<sup>−1</sup>, both continuous dynamic recrystallization (CDRX) and DDRX are the main dynamic softening mechanisms. Due to high strain energy accumulation, the samples deformed at lower temperatures (below 1100 °C) and then solution-treated at 1120 °C for 8 h exhibit significant increases in recrystallization volume fraction and recrystallization grain size. Conversely, the samples deformed at higher temperatures (above 1100 °C) and then solution-treated at 1120 °C for 8 h show minimal changes in recrystallization volume fraction and recrystallization grain size. After solution treatment at 1140 °C, the grain size of the alloy significantly increases. The samples deformed at higher strain rates exhibit the evolution of fine γ′ phases into elongated rod shapes during solution treatment, while larger γ′ phases undergo splitting processes.</p></div>\",\"PeriodicalId\":54332,\"journal\":{\"name\":\"Journal of Materials Research and Technology-Jmr&t\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":6.2000,\"publicationDate\":\"2024-09-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S2238785424020313/pdfft?md5=46f4a24c0ccabe4b2d5c25c71c6c0403&pid=1-s2.0-S2238785424020313-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Materials Research and Technology-Jmr&t\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2238785424020313\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Materials Research and Technology-Jmr&t","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2238785424020313","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

通过对 GH4079 超合金的热压缩和后续热处理实验,研究了不同热变形和热处理条件对 GH4079 超合金显微组织演变的影响。研究了不同热机械条件下晶粒和 γ′ 相的演变。结果表明,在变形温度高于 1100 ℃、应变速率介于 0.01 至 0.1 s-1 之间时,合金动态软化的主要机制是不连续动态再结晶(DDRX)。当变形温度低于 1100 °C,应变速率在 0.01 至 0.1 s-1 之间时,连续动态再结晶(CDRX)和 DDRX 都是主要的动态软化机制。由于应变能积累较高,样品在较低温度(低于 1100 ℃)下变形,然后在 1120 ℃ 溶液处理 8 小时后,再结晶体积分数和再结晶晶粒尺寸显著增加。相反,在较高温度(1100 °C以上)下变形,然后在1120 °C下固溶处理8小时的样品,再结晶体积分数和再结晶晶粒大小的变化很小。在 1140 ℃ 下进行固溶处理后,合金的晶粒尺寸明显增大。在较高应变速率下变形的样品在固溶处理过程中表现出细小的 γ′ 相演变成拉长的棒状,而较大的 γ′ 相则发生分裂过程。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Microstructural evolution of GH4079 superalloy during hot deformation and heat treatment

Through hot compression and subsequent heat treatment experiments on GH4079 superalloy, the influence of different hot deformation and heat treatment conditions on the evolution of GH4079 superalloy microstructure was studied. The evolution of grains and γ′ phases under different thermomechanical conditions was investigated. The results indicate that at deformation temperatures above 1100 °C and strain rates ranging from 0.01 to 0.1 s−1, the primary mechanism of dynamic softening in the alloy is discontinuous dynamic recrystallization (DDRX). When the deformation temperature is below 1100 °C and strain rates range from 0.01 to 0.1 s−1, both continuous dynamic recrystallization (CDRX) and DDRX are the main dynamic softening mechanisms. Due to high strain energy accumulation, the samples deformed at lower temperatures (below 1100 °C) and then solution-treated at 1120 °C for 8 h exhibit significant increases in recrystallization volume fraction and recrystallization grain size. Conversely, the samples deformed at higher temperatures (above 1100 °C) and then solution-treated at 1120 °C for 8 h show minimal changes in recrystallization volume fraction and recrystallization grain size. After solution treatment at 1140 °C, the grain size of the alloy significantly increases. The samples deformed at higher strain rates exhibit the evolution of fine γ′ phases into elongated rod shapes during solution treatment, while larger γ′ phases undergo splitting processes.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Materials Research and Technology-Jmr&t
Journal of Materials Research and Technology-Jmr&t Materials Science-Metals and Alloys
CiteScore
8.80
自引率
9.40%
发文量
1877
审稿时长
35 days
期刊介绍: The Journal of Materials Research and Technology is a publication of ABM - Brazilian Metallurgical, Materials and Mining Association - and publishes four issues per year also with a free version online (www.jmrt.com.br). The journal provides an international medium for the publication of theoretical and experimental studies related to Metallurgy, Materials and Minerals research and technology. Appropriate submissions to the Journal of Materials Research and Technology should include scientific and/or engineering factors which affect processes and products in the Metallurgy, Materials and Mining areas.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信