Fatty Imidazolines as a Green Corrosion Inhibitor of Bronze Exposed to Acid Rain

Acid rain is one of the primary corrosive agents on bronze exposed to the atmosphere. Bronze naturally forms a layer of oxides on its surface called patina, protecting it from corrosion. However, when exposed to acid rain, this layer dissolves, making it necessary to use a corrosion inhibitor or stabilize the patina. This study investigated fatty imidazolines derived from agro-industrial waste bran as a corrosion inhibitor of SAE-62 bronze in simulated acid rain (pH of 4.16 ± 0.1). Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization curve (PC) measurements were used to evaluate corrosion inhibition efficiency, which was 90% for an inhibitor concentration of 50 ppm. The EIS measurements showed that the fatty imidazolines formed a protective film that stabilized the patina on the bronze surface to a certain extent by hindering the charge transfer process. SEM–EDS analyzed the morphology and composition of the protective oxide layer. The results were complemented by Raman spectroscopy and XRD analysis, indicating cuprite, tenorite, cassiterite, and covellite in the patina layer formed on the bronze surface. The SEM analysis showed that the protective coating on the bronze surface was homogeneous using a 50-ppm inhibitor concentration. The XRD analysis suggested the presence of an organic complex that stabilizes the corrosion products formed on the bronze surface.