Pannawit Tipsawat, Xiaojun Zheng, Quyen T. Tran, Thomas N. Jackson, Susan Trolier-McKinstry
{"title":"对部分释放的 Pb(Zr,Ti)O3 结构进行定量压电测量","authors":"Pannawit Tipsawat, Xiaojun Zheng, Quyen T. Tran, Thomas N. Jackson, Susan Trolier-McKinstry","doi":"10.1063/5.0215677","DOIUrl":null,"url":null,"abstract":"The effective large signal longitudinal piezoelectric coefficient (d33,f∗) of piezoelectric thin films on rigid substrates has been widely investigated. Unclamped piezoelectric thin films are predicted to have a higher d33,f∗ coefficient due to reduced constraints on piezoelectric strain, domain reorientation, and domain wall motion, but quantitative measurements of this coefficient have been limited. This study uses microfabrication techniques along with double-beam laser interferometry (DBLI) to accurately determine the longitudinal piezoelectric coefficient of Pb(Zr,Ti)O3 thin films in partially released piezomicroelectromechanical structures. A two-step backside release process was used: first, deep reactive ion etching to create backside vias and second, wet etching of the ZnO sacrificial layer to release the area beneath the Pb(Zr,Ti)O3 thin films. Post wet etching, optical profilometry showed concavely deformed diaphragms resulting from asymmetrical stress profiles through the diaphragm thickness. DBLI was then used to examine diaphragm deflection under an applied unipolar voltage ranging from 0 to 10 V. Devices with 50% and 75% of the area beneath the top electrode released exhibited large signal d33,f∗ values of 410 ± 6 and 420 ± 8 pm/V, respectively, more than three times higher than the d33,f∗ value of the clamped samples: 126 ± 13 pm/V. The reasons contributing to the large d33,f∗ include (i) the change in stress levels due to the release process, (ii) the elimination of mechanical constraints from substrate clamping, and (iii) enhanced domain reorientation. These findings confirm that substrate declamping significantly boosts the piezoelectric coefficient, bringing d33,f∗ closer to the bulk longitudinal piezoelectric coefficient (d33).","PeriodicalId":15088,"journal":{"name":"Journal of Applied Physics","volume":"10 1","pages":""},"PeriodicalIF":2.7000,"publicationDate":"2024-09-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Quantitative piezoelectric measurements of partially released Pb(Zr, Ti)O3 structures\",\"authors\":\"Pannawit Tipsawat, Xiaojun Zheng, Quyen T. Tran, Thomas N. Jackson, Susan Trolier-McKinstry\",\"doi\":\"10.1063/5.0215677\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The effective large signal longitudinal piezoelectric coefficient (d33,f∗) of piezoelectric thin films on rigid substrates has been widely investigated. Unclamped piezoelectric thin films are predicted to have a higher d33,f∗ coefficient due to reduced constraints on piezoelectric strain, domain reorientation, and domain wall motion, but quantitative measurements of this coefficient have been limited. This study uses microfabrication techniques along with double-beam laser interferometry (DBLI) to accurately determine the longitudinal piezoelectric coefficient of Pb(Zr,Ti)O3 thin films in partially released piezomicroelectromechanical structures. A two-step backside release process was used: first, deep reactive ion etching to create backside vias and second, wet etching of the ZnO sacrificial layer to release the area beneath the Pb(Zr,Ti)O3 thin films. Post wet etching, optical profilometry showed concavely deformed diaphragms resulting from asymmetrical stress profiles through the diaphragm thickness. DBLI was then used to examine diaphragm deflection under an applied unipolar voltage ranging from 0 to 10 V. Devices with 50% and 75% of the area beneath the top electrode released exhibited large signal d33,f∗ values of 410 ± 6 and 420 ± 8 pm/V, respectively, more than three times higher than the d33,f∗ value of the clamped samples: 126 ± 13 pm/V. The reasons contributing to the large d33,f∗ include (i) the change in stress levels due to the release process, (ii) the elimination of mechanical constraints from substrate clamping, and (iii) enhanced domain reorientation. These findings confirm that substrate declamping significantly boosts the piezoelectric coefficient, bringing d33,f∗ closer to the bulk longitudinal piezoelectric coefficient (d33).\",\"PeriodicalId\":15088,\"journal\":{\"name\":\"Journal of Applied Physics\",\"volume\":\"10 1\",\"pages\":\"\"},\"PeriodicalIF\":2.7000,\"publicationDate\":\"2024-09-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Applied Physics\",\"FirstCategoryId\":\"101\",\"ListUrlMain\":\"https://doi.org/10.1063/5.0215677\",\"RegionNum\":3,\"RegionCategory\":\"物理与天体物理\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"PHYSICS, APPLIED\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Applied Physics","FirstCategoryId":"101","ListUrlMain":"https://doi.org/10.1063/5.0215677","RegionNum":3,"RegionCategory":"物理与天体物理","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"PHYSICS, APPLIED","Score":null,"Total":0}
Quantitative piezoelectric measurements of partially released Pb(Zr, Ti)O3 structures
The effective large signal longitudinal piezoelectric coefficient (d33,f∗) of piezoelectric thin films on rigid substrates has been widely investigated. Unclamped piezoelectric thin films are predicted to have a higher d33,f∗ coefficient due to reduced constraints on piezoelectric strain, domain reorientation, and domain wall motion, but quantitative measurements of this coefficient have been limited. This study uses microfabrication techniques along with double-beam laser interferometry (DBLI) to accurately determine the longitudinal piezoelectric coefficient of Pb(Zr,Ti)O3 thin films in partially released piezomicroelectromechanical structures. A two-step backside release process was used: first, deep reactive ion etching to create backside vias and second, wet etching of the ZnO sacrificial layer to release the area beneath the Pb(Zr,Ti)O3 thin films. Post wet etching, optical profilometry showed concavely deformed diaphragms resulting from asymmetrical stress profiles through the diaphragm thickness. DBLI was then used to examine diaphragm deflection under an applied unipolar voltage ranging from 0 to 10 V. Devices with 50% and 75% of the area beneath the top electrode released exhibited large signal d33,f∗ values of 410 ± 6 and 420 ± 8 pm/V, respectively, more than three times higher than the d33,f∗ value of the clamped samples: 126 ± 13 pm/V. The reasons contributing to the large d33,f∗ include (i) the change in stress levels due to the release process, (ii) the elimination of mechanical constraints from substrate clamping, and (iii) enhanced domain reorientation. These findings confirm that substrate declamping significantly boosts the piezoelectric coefficient, bringing d33,f∗ closer to the bulk longitudinal piezoelectric coefficient (d33).
期刊介绍:
The Journal of Applied Physics (JAP) is an influential international journal publishing significant new experimental and theoretical results of applied physics research.
Topics covered in JAP are diverse and reflect the most current applied physics research, including:
Dielectrics, ferroelectrics, and multiferroics-
Electrical discharges, plasmas, and plasma-surface interactions-
Emerging, interdisciplinary, and other fields of applied physics-
Magnetism, spintronics, and superconductivity-
Organic-Inorganic systems, including organic electronics-
Photonics, plasmonics, photovoltaics, lasers, optical materials, and phenomena-
Physics of devices and sensors-
Physics of materials, including electrical, thermal, mechanical and other properties-
Physics of matter under extreme conditions-
Physics of nanoscale and low-dimensional systems, including atomic and quantum phenomena-
Physics of semiconductors-
Soft matter, fluids, and biophysics-
Thin films, interfaces, and surfaces