Numerical solution for the interior electric displacement of the moving DBY‐PS model for semi‐permeable cracked piezoelectric material

In this study, we analysed a moving crack at the interface of an infinitely long piezoelectric bilayer using the Dugdale–Barenblatt yield (DBY) model and the polarisation saturation (PS) model. To model the moving crack problem, a Yoffe‐type crack moves at a constant subsonic speed on the interface of an infinitely long piezoelectric bilayer. The crack faces are assumed to be semi‐permeable, and at the boundary of the bilayer, in‐plane electrical and out‐of‐plane mechanical stresses are applied. Due to the application of electro‐mechanical loads, cracks propagate, mechanical yielding zones and electric saturation zones are developed. To arrest the crack from further propagation, mechanical yield stress and saturation electric displacement are applied at the developed zones. To address this problem analytically and numerically, the mixed boundary value problem is transformed into a set of coupled Fredholm integral equations (FIEs) of the second kind using the Fourier transform and the Copson method. The closed‐form analytical expressions for the length of the electrical saturation zone (ESZ), whether longer, shorter or equal to the mechanical yielding zone (MYZ), show dependence on external electro‐mechanical loads under semi‐permeable crack conditions. The algorithm to solve the electric crack condition parameter (ECCP) has been defined using numerical discretization and the bisection method. Illustrative examples demonstrate the proposed technique's effectiveness and suitability for Yoffe‐type moving cracks. The numerical results show the convergence of the ECCP. Furthermore, the numerical results show how mechanical and electrical zone lengths and energy release rate (ERR) are affected by electrical and mechanical loads, strip thickness and crack velocity. In addition, the size of the mechanical yielding zone is consistently promoted by electrical load, while the promotion or prevention of the electrical saturation zone by mechanical load depends on the relative sizes of the nonlinear zones.