纳米/超细晶粒 Fe-17Cr-6Ni 不锈钢优异的低温超塑性及其变形机理

IF 6.2 2区 材料科学 Q1 MATERIALS SCIENCE, MULTIDISCIPLINARY
{"title":"纳米/超细晶粒 Fe-17Cr-6Ni 不锈钢优异的低温超塑性及其变形机理","authors":"","doi":"10.1016/j.jmrt.2024.09.037","DOIUrl":null,"url":null,"abstract":"<div><p>Superplastic deformation typically occurs in non-ferrous metals at high temperatures, which results in severe surface oxidation and high energy consumption. In this study, we designed and manufactured a nano/ultrafine-grained stainless steel with a dual-phase microstructure that exhibits excellent low-temperature superplastic deformation capability. A maximum tensile elongation of approximately 500% was achieved when the tensile test was conducted at 700 °C with an initial strain rate of 5 × 10⁻⁴ s⁻<sup>1</sup>. Even after a 500% tensile elongation, the austenite grains in the gauge section of the tensile specimen still maintained an equiaxed grain shape, and the texture also weakened significantly, indicating that grain boundary sliding and grain rotation dominated the deformation process during superplastic flow. The outstanding superplasticity is mainly attributed to the dual-phase microstructure composed of nano/ultrafine austenite grains and martensite.</p></div>","PeriodicalId":54332,"journal":{"name":"Journal of Materials Research and Technology-Jmr&t","volume":null,"pages":null},"PeriodicalIF":6.2000,"publicationDate":"2024-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2238785424020428/pdfft?md5=77d1452f718a442ee08a5e6786d733b5&pid=1-s2.0-S2238785424020428-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Excellent low temperature superplasticity and its deformation mechanism in nano/ultrafine grained Fe–17Cr–6Ni stainless steel\",\"authors\":\"\",\"doi\":\"10.1016/j.jmrt.2024.09.037\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Superplastic deformation typically occurs in non-ferrous metals at high temperatures, which results in severe surface oxidation and high energy consumption. In this study, we designed and manufactured a nano/ultrafine-grained stainless steel with a dual-phase microstructure that exhibits excellent low-temperature superplastic deformation capability. A maximum tensile elongation of approximately 500% was achieved when the tensile test was conducted at 700 °C with an initial strain rate of 5 × 10⁻⁴ s⁻<sup>1</sup>. Even after a 500% tensile elongation, the austenite grains in the gauge section of the tensile specimen still maintained an equiaxed grain shape, and the texture also weakened significantly, indicating that grain boundary sliding and grain rotation dominated the deformation process during superplastic flow. The outstanding superplasticity is mainly attributed to the dual-phase microstructure composed of nano/ultrafine austenite grains and martensite.</p></div>\",\"PeriodicalId\":54332,\"journal\":{\"name\":\"Journal of Materials Research and Technology-Jmr&t\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":6.2000,\"publicationDate\":\"2024-09-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S2238785424020428/pdfft?md5=77d1452f718a442ee08a5e6786d733b5&pid=1-s2.0-S2238785424020428-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Materials Research and Technology-Jmr&t\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2238785424020428\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Materials Research and Technology-Jmr&t","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2238785424020428","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

有色金属通常会在高温下发生超塑性变形,从而导致严重的表面氧化和高能耗。在这项研究中,我们设计并制造了一种具有双相微观结构的纳米/超细晶粒不锈钢,它具有出色的低温超塑性变形能力。在 700 ℃、初始应变率为 5 × 10-⁴ s-1 的条件下进行拉伸试验时,最大拉伸伸长率约为 500%。即使拉伸伸长率达到 500%,拉伸试样规整截面上的奥氏体晶粒仍保持等轴晶粒形状,纹理也明显减弱,这表明在超塑性流动过程中,晶界滑动和晶粒旋转主导了变形过程。突出的超塑性主要归因于由纳米/超细奥氏体晶粒和马氏体组成的双相微观结构。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Excellent low temperature superplasticity and its deformation mechanism in nano/ultrafine grained Fe–17Cr–6Ni stainless steel

Superplastic deformation typically occurs in non-ferrous metals at high temperatures, which results in severe surface oxidation and high energy consumption. In this study, we designed and manufactured a nano/ultrafine-grained stainless steel with a dual-phase microstructure that exhibits excellent low-temperature superplastic deformation capability. A maximum tensile elongation of approximately 500% was achieved when the tensile test was conducted at 700 °C with an initial strain rate of 5 × 10⁻⁴ s⁻1. Even after a 500% tensile elongation, the austenite grains in the gauge section of the tensile specimen still maintained an equiaxed grain shape, and the texture also weakened significantly, indicating that grain boundary sliding and grain rotation dominated the deformation process during superplastic flow. The outstanding superplasticity is mainly attributed to the dual-phase microstructure composed of nano/ultrafine austenite grains and martensite.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Materials Research and Technology-Jmr&t
Journal of Materials Research and Technology-Jmr&t Materials Science-Metals and Alloys
CiteScore
8.80
自引率
9.40%
发文量
1877
审稿时长
35 days
期刊介绍: The Journal of Materials Research and Technology is a publication of ABM - Brazilian Metallurgical, Materials and Mining Association - and publishes four issues per year also with a free version online (www.jmrt.com.br). The journal provides an international medium for the publication of theoretical and experimental studies related to Metallurgy, Materials and Minerals research and technology. Appropriate submissions to the Journal of Materials Research and Technology should include scientific and/or engineering factors which affect processes and products in the Metallurgy, Materials and Mining areas.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信