Qingyi Feng , Bo Li , Xia Xiang , Hongxiang Deng , Guixia Yang , Sean Li , Xiaotao Zu
{"title":"低能自离子辐照诱导的石墨烯/α-二氧化硅波纹结构和电子特性退化","authors":"Qingyi Feng , Bo Li , Xia Xiang , Hongxiang Deng , Guixia Yang , Sean Li , Xiaotao Zu","doi":"10.1016/j.commatsci.2024.113347","DOIUrl":null,"url":null,"abstract":"<div><p>The unexpected performance degradation often occurs when ion beams are applied to improve graphene devices performance and the mechanism of performance degradation is still controversial. The current theoretical research on the degradation mechanism nearly overlooks the influence of the substrate. In this work, the low-energy ion irradiation response of the Graphene/α-SiO<sub>2</sub> system is investigated by molecular dynamics and first-principles calculations to understand the possible impact of the substrate. The 40 eV∼10 keV C ions are selected as self-ions for irradiation to avoid the introduction of impurities. The simulated results show that some low-energy C ions rebound between the graphene layer and α-SiO<sub>2</sub> substrate because some of the C ions are rebounded on the substrate surface rather than entering the substrate. The flat graphene becomes a ripple structure due to the rebound of C ions and the distance between graphene and substrate increases. The ripples result in the indirect band gap and the increased effective mass to degrade the electronic performance of graphene devices. In addition, the coupling between ripples and vacancy defects significantly exacerbates the degradation of graphene transport capacity. The substrate is still amorphous during irradiation, but some C ions entered the substrate hinder its insulation property. Overall, the changes in electronic properties caused by ripple structures coupled with vacancy defects should be an important factor responsible for device performance degradation. This work provides a new insight into the performance modification and degradation mechanism of graphene-based devices by ion beams.</p></div>","PeriodicalId":10650,"journal":{"name":"Computational Materials Science","volume":"246 ","pages":"Article 113347"},"PeriodicalIF":3.1000,"publicationDate":"2024-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Ripple structure and electronic property degradation of Graphene/α-SiO2 induced by low-Energy self‐Ion irradiation\",\"authors\":\"Qingyi Feng , Bo Li , Xia Xiang , Hongxiang Deng , Guixia Yang , Sean Li , Xiaotao Zu\",\"doi\":\"10.1016/j.commatsci.2024.113347\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The unexpected performance degradation often occurs when ion beams are applied to improve graphene devices performance and the mechanism of performance degradation is still controversial. The current theoretical research on the degradation mechanism nearly overlooks the influence of the substrate. In this work, the low-energy ion irradiation response of the Graphene/α-SiO<sub>2</sub> system is investigated by molecular dynamics and first-principles calculations to understand the possible impact of the substrate. The 40 eV∼10 keV C ions are selected as self-ions for irradiation to avoid the introduction of impurities. The simulated results show that some low-energy C ions rebound between the graphene layer and α-SiO<sub>2</sub> substrate because some of the C ions are rebounded on the substrate surface rather than entering the substrate. The flat graphene becomes a ripple structure due to the rebound of C ions and the distance between graphene and substrate increases. The ripples result in the indirect band gap and the increased effective mass to degrade the electronic performance of graphene devices. In addition, the coupling between ripples and vacancy defects significantly exacerbates the degradation of graphene transport capacity. The substrate is still amorphous during irradiation, but some C ions entered the substrate hinder its insulation property. Overall, the changes in electronic properties caused by ripple structures coupled with vacancy defects should be an important factor responsible for device performance degradation. This work provides a new insight into the performance modification and degradation mechanism of graphene-based devices by ion beams.</p></div>\",\"PeriodicalId\":10650,\"journal\":{\"name\":\"Computational Materials Science\",\"volume\":\"246 \",\"pages\":\"Article 113347\"},\"PeriodicalIF\":3.1000,\"publicationDate\":\"2024-09-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Computational Materials Science\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0927025624005688\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Computational Materials Science","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0927025624005688","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0
摘要
在应用离子束提高石墨烯器件性能时,经常会出现意想不到的性能退化,而性能退化的机理仍存在争议。目前关于降解机理的理论研究几乎忽略了基底的影响。本文通过分子动力学和第一性原理计算研究了石墨烯/α-SiO2 体系的低能离子照射响应,以了解衬底可能产生的影响。选择 40 eV∼10 keV 的 C 离子作为自离子进行辐照,以避免引入杂质。模拟结果表明,一些低能 C 离子在石墨烯层和α-SiO2 衬底之间反弹,因为一些 C 离子反弹到衬底表面,而不是进入衬底。由于 C 离子的反弹,平坦的石墨烯变成了波纹结构,石墨烯和基底之间的距离也随之增加。波纹导致间接带隙和有效质量增加,从而降低了石墨烯器件的电子性能。此外,涟漪与空位缺陷之间的耦合也会显著加剧石墨烯传输能力的下降。在辐照过程中,基底仍然是无定形的,但一些 C 离子进入基底会阻碍其绝缘性能。总之,波纹结构和空位缺陷引起的电子特性变化应该是导致器件性能下降的一个重要因素。这项工作为离子束对石墨烯基器件的性能改变和降解机制提供了新的见解。
Ripple structure and electronic property degradation of Graphene/α-SiO2 induced by low-Energy self‐Ion irradiation
The unexpected performance degradation often occurs when ion beams are applied to improve graphene devices performance and the mechanism of performance degradation is still controversial. The current theoretical research on the degradation mechanism nearly overlooks the influence of the substrate. In this work, the low-energy ion irradiation response of the Graphene/α-SiO2 system is investigated by molecular dynamics and first-principles calculations to understand the possible impact of the substrate. The 40 eV∼10 keV C ions are selected as self-ions for irradiation to avoid the introduction of impurities. The simulated results show that some low-energy C ions rebound between the graphene layer and α-SiO2 substrate because some of the C ions are rebounded on the substrate surface rather than entering the substrate. The flat graphene becomes a ripple structure due to the rebound of C ions and the distance between graphene and substrate increases. The ripples result in the indirect band gap and the increased effective mass to degrade the electronic performance of graphene devices. In addition, the coupling between ripples and vacancy defects significantly exacerbates the degradation of graphene transport capacity. The substrate is still amorphous during irradiation, but some C ions entered the substrate hinder its insulation property. Overall, the changes in electronic properties caused by ripple structures coupled with vacancy defects should be an important factor responsible for device performance degradation. This work provides a new insight into the performance modification and degradation mechanism of graphene-based devices by ion beams.
期刊介绍:
The goal of Computational Materials Science is to report on results that provide new or unique insights into, or significantly expand our understanding of, the properties of materials or phenomena associated with their design, synthesis, processing, characterization, and utilization. To be relevant to the journal, the results should be applied or applicable to specific material systems that are discussed within the submission.