{"title":"客观比较主动控制设备性能的创新方法","authors":"","doi":"10.1016/j.jsv.2024.118688","DOIUrl":null,"url":null,"abstract":"<div><p>In the active control literature, the question of how to objectively and comprehensively compare system performance has received little attention. In most cases, comparisons are only made on a paper-specific application and cannot be extended to new cases. A unified method for intensive comparison of algorithm performance is proposed in this work. It is based on the definition of 9 indicators, aiming to quantify the speed of the control and its ability to reduce energy in the desired frequency range, without amplifying energy outside this range. Two descriptors describe the performance in the transient regime and the others describe the steady state performance of the control. The algorithms used to estimate these indicators are designed to rely on a small number of parameters and to be as robust as possible. Then, a procedure to get a satisfactory index from these indicators is provided. This procedure adapts to the user’s needs by allowing him to choose the test signals and to adjust the weighting of the indicators in the calculation of the satisfactory index. Two feedforward adaptive control algorithms for vibration cancellation are compared using this method. The first is the well-known Filtered-x Least Mean Square (FxLMS) and the second is based on a central controller using the Youla–Kučera<!--> <!-->parameterisation. Test signals are recorded from an experimental test bench consisting of a cantilever beam driven by a vibration shaker at one end and controlled by an actuator at the other end. The results show that the proposed descriptors can be used to quantify known behaviours such as the waterbed effect. They also show that neither of the two algorithms tested can be considered inherently better, as the procedure can recommend one or the other depending on the user’s requirements. Unlike other methods previously published, the evaluation protocol proposed in this paper is designed to enable the performance of a wide range of active control algorithms to be compared and quantified, whatever the application.</p></div>","PeriodicalId":17233,"journal":{"name":"Journal of Sound and Vibration","volume":null,"pages":null},"PeriodicalIF":4.3000,"publicationDate":"2024-08-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"An innovative method for the objective comparison of the performance of active control devices\",\"authors\":\"\",\"doi\":\"10.1016/j.jsv.2024.118688\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In the active control literature, the question of how to objectively and comprehensively compare system performance has received little attention. In most cases, comparisons are only made on a paper-specific application and cannot be extended to new cases. A unified method for intensive comparison of algorithm performance is proposed in this work. It is based on the definition of 9 indicators, aiming to quantify the speed of the control and its ability to reduce energy in the desired frequency range, without amplifying energy outside this range. Two descriptors describe the performance in the transient regime and the others describe the steady state performance of the control. The algorithms used to estimate these indicators are designed to rely on a small number of parameters and to be as robust as possible. Then, a procedure to get a satisfactory index from these indicators is provided. This procedure adapts to the user’s needs by allowing him to choose the test signals and to adjust the weighting of the indicators in the calculation of the satisfactory index. Two feedforward adaptive control algorithms for vibration cancellation are compared using this method. The first is the well-known Filtered-x Least Mean Square (FxLMS) and the second is based on a central controller using the Youla–Kučera<!--> <!-->parameterisation. Test signals are recorded from an experimental test bench consisting of a cantilever beam driven by a vibration shaker at one end and controlled by an actuator at the other end. The results show that the proposed descriptors can be used to quantify known behaviours such as the waterbed effect. They also show that neither of the two algorithms tested can be considered inherently better, as the procedure can recommend one or the other depending on the user’s requirements. Unlike other methods previously published, the evaluation protocol proposed in this paper is designed to enable the performance of a wide range of active control algorithms to be compared and quantified, whatever the application.</p></div>\",\"PeriodicalId\":17233,\"journal\":{\"name\":\"Journal of Sound and Vibration\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.3000,\"publicationDate\":\"2024-08-24\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Sound and Vibration\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0022460X24004504\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ACOUSTICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Sound and Vibration","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0022460X24004504","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ACOUSTICS","Score":null,"Total":0}
An innovative method for the objective comparison of the performance of active control devices
In the active control literature, the question of how to objectively and comprehensively compare system performance has received little attention. In most cases, comparisons are only made on a paper-specific application and cannot be extended to new cases. A unified method for intensive comparison of algorithm performance is proposed in this work. It is based on the definition of 9 indicators, aiming to quantify the speed of the control and its ability to reduce energy in the desired frequency range, without amplifying energy outside this range. Two descriptors describe the performance in the transient regime and the others describe the steady state performance of the control. The algorithms used to estimate these indicators are designed to rely on a small number of parameters and to be as robust as possible. Then, a procedure to get a satisfactory index from these indicators is provided. This procedure adapts to the user’s needs by allowing him to choose the test signals and to adjust the weighting of the indicators in the calculation of the satisfactory index. Two feedforward adaptive control algorithms for vibration cancellation are compared using this method. The first is the well-known Filtered-x Least Mean Square (FxLMS) and the second is based on a central controller using the Youla–Kučera parameterisation. Test signals are recorded from an experimental test bench consisting of a cantilever beam driven by a vibration shaker at one end and controlled by an actuator at the other end. The results show that the proposed descriptors can be used to quantify known behaviours such as the waterbed effect. They also show that neither of the two algorithms tested can be considered inherently better, as the procedure can recommend one or the other depending on the user’s requirements. Unlike other methods previously published, the evaluation protocol proposed in this paper is designed to enable the performance of a wide range of active control algorithms to be compared and quantified, whatever the application.
期刊介绍:
The Journal of Sound and Vibration (JSV) is an independent journal devoted to the prompt publication of original papers, both theoretical and experimental, that provide new information on any aspect of sound or vibration. There is an emphasis on fundamental work that has potential for practical application.
JSV was founded and operates on the premise that the subject of sound and vibration requires a journal that publishes papers of a high technical standard across the various subdisciplines, thus facilitating awareness of techniques and discoveries in one area that may be applicable in others.