Achieving efficient hardfacing on stainless steel using single SiC powder in laser directed energy deposition

Generally, in a laser hardfacing process, a mixture of ceramic and metal powder is used to clad a hard surface, resulting in enhanced wear characteristics of metal parts. This study proposes an efficient hardfacing process that uses a single and minimal amount of ceramic powder (0.079 g/min in this work). This process, named as Laser Directed Energy Deposition of Minimal Ceramic Powder (LDED-MCP), features that the melt pool is generated inwardly because only the substrate participates in forming the melt pool. Furthermore, due to the minimal powder flow rate used and sparse particle-melt pool collision events, ripple formations leading to the convective melt pool flow and inhomogeneous microstructures would be suppressed. Consequently, the produced layer is nearly flat and free of incompletely melted metallic particles, thus minimizing post-machining. For a 316 L substrate and SiC powder material combination, a crack-free layer about 560 μm thick with an average hardness of about 417 HV was created through process parameter optimization. This layer showed a eutectic structure composed of γ-austenite and chromium carbides, partially melted SiC particles between dendrites, and in-situ synthesized SiC nanoparticles decorating the cell walls. Through this work, near-net-shape hardfacing of stainless steels is realized through LDED-MCP process minimizing powder pre-processing and post surface machining.