{"title":"利用亲水相互作用液相色谱法和带电气溶胶检测器对依替米星中的杂质进行定量分析。","authors":"","doi":"10.1016/j.jpba.2024.116384","DOIUrl":null,"url":null,"abstract":"<div><p>Etimicin is a typical aminoglycoside antibiotic (AG). High performance liquid chromatography-evaporation light scattering detector (HPLC-ELSD) method is a commonly used method for determining impurities in Etimicin. However, due to the poor reproducibility, low sensitivity and narrow linear range of the ELSD, high-throughput quantitative analysis of impurities in Etimicin currently poses a challenge. In this study, a sensitive method using hydrophilic interaction liquid chromatography coupled with charged aerosol detector (HILIC-CAD) was developed for the analysis of the impurities in Etimicin. The liquid phase conditions for determination impurities in Etimicin were optimized using Box Behnken design (BBD) and response surface methodology (RSM), resulting in satisfactory separation and optimal CAD output signal. We also studied the influence of CAD parameters on the signal-to-noise ratio and linearity of Etimicin and its impurities. This method has also been proven to be effective in separating impurities from two other typical AGs, Isepamicin and Amikacin. In the method validation, the coefficient of determination (R<sup>2</sup>) of Etimicin, Isepamicin and Amikacin and their impurities were all greater than 0.999, within the range of 0.5–50 μg/mL. The average recoveries of the impurities of three typical AGs were 99.03 %-101.22 %, RSDs all were less than 2.5 % for intra-day and inter-day precision, with good precision and accuracy. The developed HILIC-CAD quantification method was sensitive, accurate and highly selective for quantitative analysis of impurities in the AGs without need ion-pairing reagents, which is ensure the public medication safety. The method is first reported application of HILIC-CAD method for quantitative analysis of the impurities in AGs.</p></div>","PeriodicalId":16685,"journal":{"name":"Journal of pharmaceutical and biomedical analysis","volume":null,"pages":null},"PeriodicalIF":3.1000,"publicationDate":"2024-07-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Quantitative analysis of the impurities in Etimicin using hydrophilic interaction liquid chromatography coupled with charged aerosol detector\",\"authors\":\"\",\"doi\":\"10.1016/j.jpba.2024.116384\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Etimicin is a typical aminoglycoside antibiotic (AG). High performance liquid chromatography-evaporation light scattering detector (HPLC-ELSD) method is a commonly used method for determining impurities in Etimicin. However, due to the poor reproducibility, low sensitivity and narrow linear range of the ELSD, high-throughput quantitative analysis of impurities in Etimicin currently poses a challenge. In this study, a sensitive method using hydrophilic interaction liquid chromatography coupled with charged aerosol detector (HILIC-CAD) was developed for the analysis of the impurities in Etimicin. The liquid phase conditions for determination impurities in Etimicin were optimized using Box Behnken design (BBD) and response surface methodology (RSM), resulting in satisfactory separation and optimal CAD output signal. We also studied the influence of CAD parameters on the signal-to-noise ratio and linearity of Etimicin and its impurities. This method has also been proven to be effective in separating impurities from two other typical AGs, Isepamicin and Amikacin. In the method validation, the coefficient of determination (R<sup>2</sup>) of Etimicin, Isepamicin and Amikacin and their impurities were all greater than 0.999, within the range of 0.5–50 μg/mL. The average recoveries of the impurities of three typical AGs were 99.03 %-101.22 %, RSDs all were less than 2.5 % for intra-day and inter-day precision, with good precision and accuracy. The developed HILIC-CAD quantification method was sensitive, accurate and highly selective for quantitative analysis of impurities in the AGs without need ion-pairing reagents, which is ensure the public medication safety. The method is first reported application of HILIC-CAD method for quantitative analysis of the impurities in AGs.</p></div>\",\"PeriodicalId\":16685,\"journal\":{\"name\":\"Journal of pharmaceutical and biomedical analysis\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":3.1000,\"publicationDate\":\"2024-07-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of pharmaceutical and biomedical analysis\",\"FirstCategoryId\":\"3\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0731708524004242\",\"RegionNum\":3,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CHEMISTRY, ANALYTICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of pharmaceutical and biomedical analysis","FirstCategoryId":"3","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0731708524004242","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, ANALYTICAL","Score":null,"Total":0}
Quantitative analysis of the impurities in Etimicin using hydrophilic interaction liquid chromatography coupled with charged aerosol detector
Etimicin is a typical aminoglycoside antibiotic (AG). High performance liquid chromatography-evaporation light scattering detector (HPLC-ELSD) method is a commonly used method for determining impurities in Etimicin. However, due to the poor reproducibility, low sensitivity and narrow linear range of the ELSD, high-throughput quantitative analysis of impurities in Etimicin currently poses a challenge. In this study, a sensitive method using hydrophilic interaction liquid chromatography coupled with charged aerosol detector (HILIC-CAD) was developed for the analysis of the impurities in Etimicin. The liquid phase conditions for determination impurities in Etimicin were optimized using Box Behnken design (BBD) and response surface methodology (RSM), resulting in satisfactory separation and optimal CAD output signal. We also studied the influence of CAD parameters on the signal-to-noise ratio and linearity of Etimicin and its impurities. This method has also been proven to be effective in separating impurities from two other typical AGs, Isepamicin and Amikacin. In the method validation, the coefficient of determination (R2) of Etimicin, Isepamicin and Amikacin and their impurities were all greater than 0.999, within the range of 0.5–50 μg/mL. The average recoveries of the impurities of three typical AGs were 99.03 %-101.22 %, RSDs all were less than 2.5 % for intra-day and inter-day precision, with good precision and accuracy. The developed HILIC-CAD quantification method was sensitive, accurate and highly selective for quantitative analysis of impurities in the AGs without need ion-pairing reagents, which is ensure the public medication safety. The method is first reported application of HILIC-CAD method for quantitative analysis of the impurities in AGs.
期刊介绍:
This journal is an international medium directed towards the needs of academic, clinical, government and industrial analysis by publishing original research reports and critical reviews on pharmaceutical and biomedical analysis. It covers the interdisciplinary aspects of analysis in the pharmaceutical, biomedical and clinical sciences, including developments in analytical methodology, instrumentation, computation and interpretation. Submissions on novel applications focusing on drug purity and stability studies, pharmacokinetics, therapeutic monitoring, metabolic profiling; drug-related aspects of analytical biochemistry and forensic toxicology; quality assurance in the pharmaceutical industry are also welcome.
Studies from areas of well established and poorly selective methods, such as UV-VIS spectrophotometry (including derivative and multi-wavelength measurements), basic electroanalytical (potentiometric, polarographic and voltammetric) methods, fluorimetry, flow-injection analysis, etc. are accepted for publication in exceptional cases only, if a unique and substantial advantage over presently known systems is demonstrated. The same applies to the assay of simple drug formulations by any kind of methods and the determination of drugs in biological samples based merely on spiked samples. Drug purity/stability studies should contain information on the structure elucidation of the impurities/degradants.