Seismic analysis of geosynthetic-reinforced soil walls in tiered configuration

Research on geosynthetic-reinforced soil (GRS) walls in tiered configurations is increasing gaining attention, with numerical methods being predominantly used in the past. In recent years, there has been a growing trend in conducting shaking table tests to further explore this area. However, traditional limit equilibrium (LE) methods are more preferred for design purposes. This study utilized a modified top-down approach, which is based on LE and pseudo-static methods to investigate the horizontal seismic force on the distribution of required tension along each reinforcement layer. The approach is initially extended from static analysis to seismic analysis for multitiered GRS walls. Parametric analyses are conducted to study the impacts that horizontal seismic coefficient, reinforcement length and spacing, internal friction angle of soil, height ratio of upper/lower tier, offset distance have on the internal stability of two-tiered GRS walls. Meanwhile, influences of wall batter and number of tiers on the critical offset distance for different seismic coefficients are assessed. Results indicate that the internal stability differs between the upper and lower tiers under seismic conditions, particularly with higher seismic forces, where the lower tier requires greater reinforcement tension to enhance its stability. Additionally, the critical offset distance grows with the increase in seismic coefficient, and it is sensitive to the internal friction angle of soil and the height ratio.