Anupam Ghosh, Riya Wadhwa, Shivani, Sonia Deswal, Pradeep Kumar and Mukesh Kumar
{"title":"用于制造高性能宽带光电探测器的 n-Er2O3/p-Si 异质结构的交错能带排列","authors":"Anupam Ghosh, Riya Wadhwa, Shivani, Sonia Deswal, Pradeep Kumar and Mukesh Kumar","doi":"10.1088/2632-959x/ad5d81","DOIUrl":null,"url":null,"abstract":"The low responsivity of conventional Silicon photodiodes in ultraviolet and near-infrared regimes restricts their utility as broadband photodetectors (BBPDs). Despite ongoing investigations into various p-n heterostructures for Silicon-based BBPDs, challenges such as high dark current (Idark), low collection efficiency, low detectivity, and compatibility issues with large-scale Silicon-based devices persist. In this context, we have fabricated relatively unexplored n-Er2O3/p-Si heterojunction-based BBPDs. Polycrystalline Er2O3 thin films (∼110 nm) were deposited on p-Si 〈100〉 substrates by radio frequency magnetron sputtering. Although this process induces a microstrain of approximately 0.022 and a dislocation density of about 0.00303/nm2, the presence of optically active defects is minimal, indicated by a low Urbach energy (∼0.35 eV). X-ray photoelectron spectroscopy (XPS) analysis confirms staggered band alignment at the heterointerface, facilitating efficient charge carrier separation and transport. Consequently, the In/p-Si/n-Er2O3/In device demonstrated significant BBPD properties– low Idark ∼0.15 μA (at +5 V), photo-to-dark current ratio (PDCR) ∼6.5 (at +5 V, 700 nm) with a maximum photoresponsivity ∼22.3 A W−1, and impressive detectivity (∼1013 Jones) even in UV-C region where traditional silicon-based photodetectors respond feebly. The device also demonstrates transient photo-response across an ultrawide spectrum (254 nm–1200 nm) with a fast rise time/fall time ∼79 ms/∼86 ms (at −5 V for 600 nm illumination). This work establishes a straightforward and reliable method for proper material engineering, surface texturing, staggered heterojunction formation, and high-performance BBPD fabrication with prominent broad-spectrum responsivity, sizeable detectivity, and fast response. The integration of these BBPDs with Silicon opens possibilities for their use in electronic devices containing optical switches for communications and broadband image sensors, enhancing their utility in various applications.","PeriodicalId":501827,"journal":{"name":"Nano Express","volume":"34 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-07-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Staggered band alignment of n-Er2O3/p-Si heterostructure for the fabrication of a high-performance broadband photodetector\",\"authors\":\"Anupam Ghosh, Riya Wadhwa, Shivani, Sonia Deswal, Pradeep Kumar and Mukesh Kumar\",\"doi\":\"10.1088/2632-959x/ad5d81\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The low responsivity of conventional Silicon photodiodes in ultraviolet and near-infrared regimes restricts their utility as broadband photodetectors (BBPDs). Despite ongoing investigations into various p-n heterostructures for Silicon-based BBPDs, challenges such as high dark current (Idark), low collection efficiency, low detectivity, and compatibility issues with large-scale Silicon-based devices persist. In this context, we have fabricated relatively unexplored n-Er2O3/p-Si heterojunction-based BBPDs. Polycrystalline Er2O3 thin films (∼110 nm) were deposited on p-Si 〈100〉 substrates by radio frequency magnetron sputtering. Although this process induces a microstrain of approximately 0.022 and a dislocation density of about 0.00303/nm2, the presence of optically active defects is minimal, indicated by a low Urbach energy (∼0.35 eV). X-ray photoelectron spectroscopy (XPS) analysis confirms staggered band alignment at the heterointerface, facilitating efficient charge carrier separation and transport. Consequently, the In/p-Si/n-Er2O3/In device demonstrated significant BBPD properties– low Idark ∼0.15 μA (at +5 V), photo-to-dark current ratio (PDCR) ∼6.5 (at +5 V, 700 nm) with a maximum photoresponsivity ∼22.3 A W−1, and impressive detectivity (∼1013 Jones) even in UV-C region where traditional silicon-based photodetectors respond feebly. The device also demonstrates transient photo-response across an ultrawide spectrum (254 nm–1200 nm) with a fast rise time/fall time ∼79 ms/∼86 ms (at −5 V for 600 nm illumination). This work establishes a straightforward and reliable method for proper material engineering, surface texturing, staggered heterojunction formation, and high-performance BBPD fabrication with prominent broad-spectrum responsivity, sizeable detectivity, and fast response. The integration of these BBPDs with Silicon opens possibilities for their use in electronic devices containing optical switches for communications and broadband image sensors, enhancing their utility in various applications.\",\"PeriodicalId\":501827,\"journal\":{\"name\":\"Nano Express\",\"volume\":\"34 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-07-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Nano Express\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1088/2632-959x/ad5d81\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Nano Express","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1088/2632-959x/ad5d81","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Staggered band alignment of n-Er2O3/p-Si heterostructure for the fabrication of a high-performance broadband photodetector
The low responsivity of conventional Silicon photodiodes in ultraviolet and near-infrared regimes restricts their utility as broadband photodetectors (BBPDs). Despite ongoing investigations into various p-n heterostructures for Silicon-based BBPDs, challenges such as high dark current (Idark), low collection efficiency, low detectivity, and compatibility issues with large-scale Silicon-based devices persist. In this context, we have fabricated relatively unexplored n-Er2O3/p-Si heterojunction-based BBPDs. Polycrystalline Er2O3 thin films (∼110 nm) were deposited on p-Si 〈100〉 substrates by radio frequency magnetron sputtering. Although this process induces a microstrain of approximately 0.022 and a dislocation density of about 0.00303/nm2, the presence of optically active defects is minimal, indicated by a low Urbach energy (∼0.35 eV). X-ray photoelectron spectroscopy (XPS) analysis confirms staggered band alignment at the heterointerface, facilitating efficient charge carrier separation and transport. Consequently, the In/p-Si/n-Er2O3/In device demonstrated significant BBPD properties– low Idark ∼0.15 μA (at +5 V), photo-to-dark current ratio (PDCR) ∼6.5 (at +5 V, 700 nm) with a maximum photoresponsivity ∼22.3 A W−1, and impressive detectivity (∼1013 Jones) even in UV-C region where traditional silicon-based photodetectors respond feebly. The device also demonstrates transient photo-response across an ultrawide spectrum (254 nm–1200 nm) with a fast rise time/fall time ∼79 ms/∼86 ms (at −5 V for 600 nm illumination). This work establishes a straightforward and reliable method for proper material engineering, surface texturing, staggered heterojunction formation, and high-performance BBPD fabrication with prominent broad-spectrum responsivity, sizeable detectivity, and fast response. The integration of these BBPDs with Silicon opens possibilities for their use in electronic devices containing optical switches for communications and broadband image sensors, enhancing their utility in various applications.