Daniel F. Sunday, Lee J. Richter, Lucas Q. Flagg, Ruipeng Li, Julia G. Murphy, Peter A. Beaucage, Eliot Gann
{"title":"底层添加剂对块状和薄膜嵌段聚合物结构的作用","authors":"Daniel F. Sunday, Lee J. Richter, Lucas Q. Flagg, Ruipeng Li, Julia G. Murphy, Peter A. Beaucage, Eliot Gann","doi":"10.1021/acs.macromol.4c00637","DOIUrl":null,"url":null,"abstract":"Blending block copolymers (BCP) with additives is a useful approach for controlling BCP morphology and properties. In athermal systems, blends of BCPs with polymer additives having very high molecular (<i>M</i><sub>n</sub>) mass generally result in macrophase separation. Bottlebrush polymers, which consist of a linear backbone and grafted side chains, present an interesting alternative where the overall <i>M</i><sub>n</sub> of the system can be very large but the low <i>M</i><sub>n</sub> side chains may drive miscibility with the BCP. In this study, a bottlebrush with a polynorbornene backbone and polystyrene (PS) side chains is blended with PS-<i>b</i>-poly(methyl methacrylate) (PS-<i>b</i>-PMMA) of varying <i>M</i><sub>n</sub>, and the resulting morphologies are examined in both the bulk and thin films. Two different <i>M</i><sub>n</sub> of PS-<i>b</i>-PMMA were used in the bulk study, and the analysis of small-angle X-ray scattering data shows that the blends were miscible and lamellar at all concentrations. This deviates from reference series of both low and high <i>M</i><sub>n</sub> linear polymer additives, which either showed morphological transitions from lamellae to cylinders (low <i>M</i><sub>n</sub>) or were immiscible at all mass fractions studied (high <i>M</i><sub>n</sub>). The relative molecular mass of the side chain (<i>N</i><sub>SC</sub>) and the corresponding component in the BCP (<i>N</i><sub>A</sub>) dictate the distribution of the bottlebrush throughout the BCP, analogous to BCP/linear blends or grafted nanoparticles in a homopolymer matrix. The studies on thin films show a thickness dependence for bottlebrush mass fractions at or above 0.17, a behavior which may be driven by conformational changes of the bottlebrush upon confinement.","PeriodicalId":51,"journal":{"name":"Macromolecules","volume":null,"pages":null},"PeriodicalIF":5.1000,"publicationDate":"2024-07-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Role of Bottlebrush Additives on the Structure of Block Copolymers in the Bulk and Thin Films\",\"authors\":\"Daniel F. Sunday, Lee J. Richter, Lucas Q. Flagg, Ruipeng Li, Julia G. Murphy, Peter A. Beaucage, Eliot Gann\",\"doi\":\"10.1021/acs.macromol.4c00637\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Blending block copolymers (BCP) with additives is a useful approach for controlling BCP morphology and properties. In athermal systems, blends of BCPs with polymer additives having very high molecular (<i>M</i><sub>n</sub>) mass generally result in macrophase separation. Bottlebrush polymers, which consist of a linear backbone and grafted side chains, present an interesting alternative where the overall <i>M</i><sub>n</sub> of the system can be very large but the low <i>M</i><sub>n</sub> side chains may drive miscibility with the BCP. In this study, a bottlebrush with a polynorbornene backbone and polystyrene (PS) side chains is blended with PS-<i>b</i>-poly(methyl methacrylate) (PS-<i>b</i>-PMMA) of varying <i>M</i><sub>n</sub>, and the resulting morphologies are examined in both the bulk and thin films. Two different <i>M</i><sub>n</sub> of PS-<i>b</i>-PMMA were used in the bulk study, and the analysis of small-angle X-ray scattering data shows that the blends were miscible and lamellar at all concentrations. This deviates from reference series of both low and high <i>M</i><sub>n</sub> linear polymer additives, which either showed morphological transitions from lamellae to cylinders (low <i>M</i><sub>n</sub>) or were immiscible at all mass fractions studied (high <i>M</i><sub>n</sub>). The relative molecular mass of the side chain (<i>N</i><sub>SC</sub>) and the corresponding component in the BCP (<i>N</i><sub>A</sub>) dictate the distribution of the bottlebrush throughout the BCP, analogous to BCP/linear blends or grafted nanoparticles in a homopolymer matrix. The studies on thin films show a thickness dependence for bottlebrush mass fractions at or above 0.17, a behavior which may be driven by conformational changes of the bottlebrush upon confinement.\",\"PeriodicalId\":51,\"journal\":{\"name\":\"Macromolecules\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":5.1000,\"publicationDate\":\"2024-07-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Macromolecules\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://doi.org/10.1021/acs.macromol.4c00637\",\"RegionNum\":1,\"RegionCategory\":\"化学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"POLYMER SCIENCE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Macromolecules","FirstCategoryId":"92","ListUrlMain":"https://doi.org/10.1021/acs.macromol.4c00637","RegionNum":1,"RegionCategory":"化学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"POLYMER SCIENCE","Score":null,"Total":0}
Role of Bottlebrush Additives on the Structure of Block Copolymers in the Bulk and Thin Films
Blending block copolymers (BCP) with additives is a useful approach for controlling BCP morphology and properties. In athermal systems, blends of BCPs with polymer additives having very high molecular (Mn) mass generally result in macrophase separation. Bottlebrush polymers, which consist of a linear backbone and grafted side chains, present an interesting alternative where the overall Mn of the system can be very large but the low Mn side chains may drive miscibility with the BCP. In this study, a bottlebrush with a polynorbornene backbone and polystyrene (PS) side chains is blended with PS-b-poly(methyl methacrylate) (PS-b-PMMA) of varying Mn, and the resulting morphologies are examined in both the bulk and thin films. Two different Mn of PS-b-PMMA were used in the bulk study, and the analysis of small-angle X-ray scattering data shows that the blends were miscible and lamellar at all concentrations. This deviates from reference series of both low and high Mn linear polymer additives, which either showed morphological transitions from lamellae to cylinders (low Mn) or were immiscible at all mass fractions studied (high Mn). The relative molecular mass of the side chain (NSC) and the corresponding component in the BCP (NA) dictate the distribution of the bottlebrush throughout the BCP, analogous to BCP/linear blends or grafted nanoparticles in a homopolymer matrix. The studies on thin films show a thickness dependence for bottlebrush mass fractions at or above 0.17, a behavior which may be driven by conformational changes of the bottlebrush upon confinement.
期刊介绍:
Macromolecules publishes original, fundamental, and impactful research on all aspects of polymer science. Topics of interest include synthesis (e.g., controlled polymerizations, polymerization catalysis, post polymerization modification, new monomer structures and polymer architectures, and polymerization mechanisms/kinetics analysis); phase behavior, thermodynamics, dynamic, and ordering/disordering phenomena (e.g., self-assembly, gelation, crystallization, solution/melt/solid-state characteristics); structure and properties (e.g., mechanical and rheological properties, surface/interfacial characteristics, electronic and transport properties); new state of the art characterization (e.g., spectroscopy, scattering, microscopy, rheology), simulation (e.g., Monte Carlo, molecular dynamics, multi-scale/coarse-grained modeling), and theoretical methods. Renewable/sustainable polymers, polymer networks, responsive polymers, electro-, magneto- and opto-active macromolecules, inorganic polymers, charge-transporting polymers (ion-containing, semiconducting, and conducting), nanostructured polymers, and polymer composites are also of interest. Typical papers published in Macromolecules showcase important and innovative concepts, experimental methods/observations, and theoretical/computational approaches that demonstrate a fundamental advance in the understanding of polymers.