Modelling the mechanics of 32 T REBCO superconductor magnet using numerical simulation

High-temperature REBCO superconducting tapes are very promising for high-field magnets. With high magnetic field applications there are high electromechanical forces, and thus a concern for mechanical damage. Due to the presence of large screening currents and the composite structure of the tape, the mechanical design of these magnets is not straightforward. In addition, many contemporary designs use insulated winding. In this work, we develop a novel two-dimensional axi-symmetric finite element tool programmed in MATLAB that assumes the displacement field to be within a linear elastic range. The stack of pancakes and the large number of REBCO tape turns are approximated as an anisotropic bulk hollow cylinder. Our results agree with uni-axial stress experiments in the literature, validating the bulk approximation. Here, we study the following configuration. The current is first ramped up to below the critical current and we calculate the screening currents and the forces that they cause using the minimum electromagnetic entropy production method (MEMEP) model. This electromagnetic model can now take insulated magnets into account. As a case study, a 32 T REBCO superconductor magnet is simulated numerically. We perform a complete mechanical analysis of the magnet by including the axial and shear mechanical quantities for each pancake, unlike in previous work where only radial and circumferential quantities were focused on. The effect on mechanical quantities without the screening current is also calculated and compared. It is shown that including the screening current-induced field strongly affects the mechanical quantities, especially the shear stress. The latter may be a critical quantity for certain magnet configurations. Additionally, in order to overcome high stresses, a stiff overbanding of different materials is considered and numerically modelled, which significantly reduces the mechanical stresses. The finite element-based model developed is efficient in calculating the mechanical behaviour of any general superconductor magnet and its devices.