Closed vessel burning rate measurements of composite propellants using microwave interferometry

Burning rate as a function of pressure is one of the primary evaluation metrics of solid propellants. Most solid propellant burning rate measurements are made at a nearly constant pressure using a variety of measurement approaches. This type of burning rate data is highly discretized and requires many tests to accurately determine the burning rate response to pressure. It would be more efficient to measure burning rate dynamically as pressures are varied. Techniques used to make transient burning rate measurements are reviewed briefly and initial results using a microwave interferometry (MI) technique are presented. The MI method used in tandem with a closed bomb enables nearly continuous measurement of burning rates for self‐pressurizing burns, capturing burning rate data over a wide range of pressures. This approach is especially useful for characterization of propellants with complex burning behaviors (e. g., slope breaks or mesa burning). The burning rates of three research propellants were characterized over a pressure range of 0.101–24.14 MPa (14–3500 psi). One research propellant exhibited a slope break at a pressure of 6.63 MPa (960 psi). Using MI in a closed pressure vessel, 14 propellant strand burns resulted in a nearly continuous burning rate curve over a pressure range of 0.41–24.13 MPa (60–3500 psi) that reasonably matched conventional burning rate measurements. The development of this technique provides an opportunity to quickly characterize the burning rate curve of solid propellants with greater fidelity and efficiency than traditional quasi‐static pressure testing techniques.