Petrographic and Textural Characterization of Beach Sands Contaminated by Asbestos Cement Materials (Cape Peloro, Messina, Italy): Hazardous Human-Environmental Relationships

In the past fifteen years, the contamination of the Italian marine coastal environments by asbestos cement materials (ACMs) represents a known crux mostly reported or denounced by mass media and environmental associations. A recent research reporting compositional and textural data related to ACMs found in the beach deposits of a protected natural reserve (Cape Peloro, Messina, Italy) induced the author to perform new petrographic and textural analyses on the Cape Peloro beach sands, pebbles, cobbles (BSPC), and technofossils (bricks, tails, slab, concrete), associated with the previously studied ACMs, in order to compare the data with those of the ACMs previously reported in the literature. The petrographic investigations allowed the author to determine that beach sands and weakly gravelly sands were characterized by a quartzo–lithic signature, being mainly composed of metamorphic grains of quartz (50–60%) and metamorphic lithics (40–50%, mainly composed of polymineral quartz + microcline, quartz + plagioclase, quartz + biotite, quartz + muscovite grains, and monomineral opaque minerals, plagioclase, k-feldspar, and almandine garnet grains), whereas the pebbles and cobbles were made of acid intrusive (granitoids) and metamorphic rocks (gneiss, augen gneiss prevailing). Pebbles and cobbles made up of porphyroids could derive from the cannibalization of the underlying lower to middle Pleistocene siliciclastic deposits of the Messina Formation. Differently, the gneiss, augen gneiss, and granitoids forming the beach pebbles and cobbles, being present both in the crystalline rocks of the Aspromonte Unit and in the clasts of the SGMF, could originate from both of them. Textural investigations allowed the author to characterize grain size, shape parameters, and roundness in the beach deposits. These were mostly composed of sands and weakly gravelly sands with medium grains. Parameters, such as elongation and flatness, showed higher values in the BSPC than in the technofossils. The shapes of the BSPC were mostly from oblate to equant, whereas the shapes of the technofossils were mostly from bladed to oblate. The main differences depended on the original shape of the technofossils, being mostly platy, and their softer composition. The roundness was from angular to sub-rounded. In the Ionian coast of the Cape Peloro peninsula, the source areas for the well-rounded ACM found on the beach and in the beach deposits could have at least four different origins: (i) Possible landfills widespread since the 1970s in the intensively urbanized coastal areas. (ii) Direct abandonment in the coastal area. (iii) Direct abandonment in the streams. (iv) Activities to counteract the erosion/lack of sediment using non-conforming materials. Considering the diffused damage caused by the coastal erosion affecting most of the Italian coast and the obvious increasing dispersion of the asbestos fibers from the ACMs over time, effectual counter actions to prevent further contamination and guidelines for clean-up efforts are necessary.